User's Manual
33
4 Permanent settings in programming mode
g T Turn the Rotary Switch until the program item ‘Machine
settings(4/7)’
is displayed.
T Press the
‘Switch off after’ button.
‘2hrs.’
g T Turn the Rotary Switch until ‘1hrs.’ is displayed.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings(4/7)’
O T Press the P button to exit programming mode.
‘Please select product:’
In the program item ‘Machine settings(4/7)’/ ‘Choose language’ you
can select the language used by your IMPRESSA.
E If you choose the wrong language by mistake, you can easily
reset the machine to
‘English’: Press the P button to enter
programming mode. Use the Rotary Switch g to select
program item ‘4/7’ and then press the top left-hand button.
Example:Proceed as follows to change the language from
‘English’
to
‘Deutsch’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the program item ‘Machine
settings(4/7)’
is displayed.
T Press the
‘Choose language’ button.
‘Choose language’
T Press the ‘Deutsch’ button.
‘Gespeichert’ appears briefly on the display.
‘Geräteeinstellungen(4/7)’
O T Press the P button to exit programming mode.
‘Bitte wählen Sie Ihr Produkt:’
In the program item ‘Machine settings(4/7)’/ ‘Factory setting’ you
can reset various settings to their factory settings:
U
‘All products’
U
The settings (amount of water, coffee strength, temperature
etc.) for all products are reset to the factory settings.
Language
Restore factory settings