E6 Instructions for Use KE For your safety: read and understand manual before use.
Table of contents Your E6 IMPORTANT SAFEGUARDS 4 Control elements 8 1 Preparing and using for the first time 10 JURA on the Internet ....................................................................................................................................10 Setting up the machine ..............................................................................................................................10 Filling the bean container ................................................................
Table of contents 8 Transport and environmentally friendly disposal 42 Transport / Emptying the system.............................................................................................................42 Disposal.........................................................................................................................................................
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS Follow the basic safety precautions When using electrical appliances, basic safety precautions shall always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Z Read all instructions. Z Do not touch hot surfaces. Use handles or knobs. Z To protect against fire, electric shock and injury to persons, do not immerse power cord, plugs, or body of machine in water or other liquid.
IMPORTANT SAFEGUARDS Intended use The appliance is designed and intended for household use only. It shall only be used for coffee preparation and to heat milk and water, according to these instructions. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use.
IMPORTANT SAFEGUARDS J CAUTION This appliance is for household use. Any servicing other than cleaning and user maintenance shall be performed by an authorized service representative: Z Do not immerse base in water or try to disassemble. Z Do not put the appliance or any individual parts in the dishwasher. Z Check voltage to be sure that the voltage indicated on the name plate complies with your voltage. The name plate is located on the underside of the appliance.
IMPORTANT SAFEGUARDS NEVER DO (or you will void your warranty protection): Z Z Z Z Z Z Z Never fill instant coffee, chocolate mix etc. into the bean container or ground coffee funnel (filler funnel for ground coffee). It will damage the functioning of the brewing chamber. Never fill sugar coated coffee beans into the bean container. In case of doubt, call your dealer.
Control elements Control elements 9 1 10 2 11 3 4 5 12 6 J HOT J HOT 7 8 1 2 3 4 5 6 7 8 8 13 14 Cover of filler funnel for cleaning tablet Filler funnel for cleaning tablet Bean container with aroma preservation cover Water tank cover Water tank Mains cord (back of the machine) Coffee grounds container Drip tray 9 10 11 12 13 14 Cover cap for grinder adjustment switch Grinder adjustment switch On/Off button Q Fine foam frother Height-adjustable coffee spout Cup platform
Control elements 1 2 3 1 2 Display Multi-function buttons (button function depends on what is shown in the display) 3 Switch for hot water and steam preparation 9
1 Preparing and using for the first time 1 Preparing and using for the first time JURA on the Internet Visit us on the Internet (www.jura.com). You will find interesting and up-to-date information on your JURA and on every aspect of coffee. Setting up the machine When setting up your JURA, please note the following: Place the JURA on a horizontal surface that is not sensitive to water. Choose a spot for your JURA which protects the machine against overheating.
1 Preparing and using for the first time T You will then be able to read the degree of water hardness from the discoloration of the Aquadur® test strip and the description on the packaging. Level Display German Degrees of general Degree (°dH) hardness (°dGH) Not active – – Very soft water <3 <3 Soft water >4 >4 Hard water > 8.4 > 8.4 Very hard water > 14 > 14 First-time use J WARNING Parts per Indicator Strip number million (ppm) of ‘reddish’ fields – – < 53.
1 Preparing and using for the first time ‘Saved’ appears briefly on the display to confirm the setting. ‘Water hardness’ E If you do not know the hardness of your water, you must find this out first (see Chapter 1 ‘Preparing and using for the first time – Determining the water hardness’). T Press the ‘ < ’ or ‘ > ’ button to change the water hardness setting, for example to ‘25 °dH’. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display.
1 Preparing and using for the first time E The machine automatically detects that you have just inserted the filter cartridge. ‘Use filter’ / ‘Saved’ ‘Switch open’ T Place a receptacle (at least 10 oz or 300 ml) under the fine foam frother. T Turn the switch to the x position. ‘Filter is being rinsed’, water flows out of the fine foam frother. Rinsing of the filter stops automatically after approximately 10 oz (300 ml). ‘Switch close’ appears on the display. T Turn the switch to the ° position.
1 Preparing and using for the first time T Place a receptacle under the fine foam frother and under the coffee spout. T Turn the switch to the x position. ‘System is filling’, the system fills up with water. ‘Switch close’ T Turn the switch to the ° position. ‘System is filling’ ‘Machine is rinsing’, the system is rinsed. The rinse stops automatically. Your JURA is ready for use. E The start screen shows the products you can prepare.
2 Preparation 2 Preparation J WARNING Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn. T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking. T In the event of scalding, rinse affected area with cold water and seek medical attention. T Keep children AWAY. E You can stop the machine at any time while a specialty coffee, steam or hot water is being prepared.
2 Preparation Espresso and coffee Example: Proceed as follows to prepare one coffee. Precondition: The start screen is displayed. T Place a cup under the coffee spout. T Press the ‘Coffee’ button. Preparation starts. ‘Coffee’ and the coffee strength are displayed. The preset amount of water for coffee flows into the cup. Preparation stops automatically. Your JURA is once more ready for use.
2 Preparation T Turn the switch to the ° position. Coffee preparation starts. The preset amount of water for espresso flows into the cup. Preparation stops automatically. Your JURA is once more ready for use. To ensure that the fine foam frother always works properly, you must clean it daily when you have been preparing milk (see Chapter 5 ‘Maintenance – Cleaning the fine foam frother’). Milk foam Precondition: The start screen is displayed. T Place a cup under the fine foam frother.
2 Preparation Permanently setting the amount of water for the cup size It is easy to permanently adjust the amount of water for all single products to the cup size. Adjust the amount once as shown in the following example. Every time you prepare a drink in the future, this amount will be dispensed. Example: Proceed as follows to permanently set the amount of water for one coffee. Precondition: The start screen is displayed. Milk is connected to the fine foam frother T Place a cup under the coffee spout.
2 Preparation T Open the cover of the grinder adjustment switch. T Press the ‘Espresso’ button to start preparation. T Turn the grinder adjustment switch to the desired position while the grinder is running. The preset amount of water flows into the cup. Preparation stops automatically. T Close the cover of the grinder adjustment switch. Hot water To obtain a perfect water flow, use the hot-water nozzle. J CAUTION There is a danger of scalding from hot water splashes.
3 3 Daily operation Daily operation Filling the water tank CAUTION Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily. Milk, sparkling mineral water or other liquids can damage the water tank or the machine. T Only fill the water tank with fresh, cold water. T Open the water tank cover. T Remove the water tank and rinse it with cold water.
3 Daily operation T Refit the coffee grounds container and the drip tray. T Rinse the water tank with clean water. T Clean the fine foam frother (see Chapter 5 ‘Maintenance – Cleaning the fine foam frother’). T Remove the milk pipe and rinse it thoroughly under running water. T Dismantle and rinse the fine foam frother (see Chapter 5 ‘Maintenance – Dismantling and rinsing the fine foam frother’). T Wipe the surface of the machine with a clean, soft, damp cloth (e.g. microfiber cloth).
3 Daily operation If milk has been prepared but you have not started milk system cleaning, the milk system is rinsed first (‘Milk system is being rinsed’). ‘Machine is rinsing’, the system rinses itself. The operation stops automatically. Your JURA is switched off.
4 4 Permanent settings in programming mode Permanent settings in programming mode J WARNING Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn. T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking. T In the event of scalding, rinse affected area with cold water an seek medical attention. T Keep children AWAY. Press the ‘ P ’ button to enter programming mode.
4 Permanent settings in programming mode Adjusting the product settings J WARNING Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn. T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking. T In the event of scalding, rinse affected area with cold water an seek medical attention. T Keep children AWAY. In the program item ‘Expert mode’ you can make individual settings for all specialty coffees and hot water.
4 Permanent settings in programming mode E Next select the button of the product for which you would like to make settings. No product is prepared at this point. E To display more products, press the ‘ > ’ button (bottom right). T Press the ‘Coffee’ button. ‘Coffee’ T Press the ‘Coffee strength’ button. ‘Coffee’ appears and the coffee strength is displayed. T Press the ‘ < ’ or ‘ > ’ button to change the setting for the coffee strength. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display.
4 Permanent settings in programming mode Setting the water hardness The harder the water is, the more frequently the JURA needs to be descaled. It is therefore important to set the water hardness accurately. The water hardness was set when the machine was first used. You can change this setting at any time. The water hardness can be adjusted on a continuous scale between 1 °dH and 30 °dH. Precondition: The start screen is displayed. T Press the ‘ P ’ button.
4 Language Permanent settings in programming mode In this program item you can set the language used by your JURA. Example: Proceed as follows to change the language from ‘English’ to ‘Deutsch’. Precondition: The start screen is displayed. T Press the ‘ P ’ button. T Press the ‘ > ’ button several times until ‘4/4’ is displayed. T Press the ‘Choose language’ button. ‘Choose language’ E To display more languages, press the ‘ > ’ button (bottom right).
5 5 Maintenance Maintenance J WARNING Use of maintenance products that are harmful to health and discharge of liquids during maintenance program. Harmful if swallowed. Irritating to eyes and skin. T Keep children AWAY. T Keep children away from the machine while it is performing a maintenance program. T Avoid contact with skin and eyes. T Avoid generation of dust. Do not inhale dust. T When using do not eat or drink. T Keep maintenance products away from food, drink and animal food.
5 Rinsing the machine Maintenance You can start coffee system rinsing manually at any time. Precondition: The start screen is displayed. T Place a receptacle under the coffee spout. T Press the ‘ c ’ button (white Maintenance symbol). T Press the ‘Rinse the coffee system’ button to start the rinse operation. ‘Machine is rinsing’, water flows out of the coffee spout. The operation stops automatically. The start screen is displayed.
5 Maintenance Cleaning the fine foam frother To ensure that the fine foam frother always works properly, you must clean it daily when you have been preparing milk. J WARNING Non-recommended cleaning agents will not optimally remove milk residues. This may cause the cappuccino frother to become blocked and fly off the machine. Discharge of hot steam. T Use only original JURA milk system cleaner. J WARNING Harmful and irritating cleaning agent. Harmful if swallowed. Irritating to eyes and skin.
5 Maintenance T Turn the switch to the ° position. ‘Clean the milk system’ T Rinse the receptacle thoroughly, fill it with 8.5 oz (250 ml) of fresh water and immerse the milk pipe in the water. T Empty the other receptacle and place it under the fine foam frother once more. T Press the ‘Next’ button. ‘Switch open’ T Turn the switch to the x position. ‘Milk system is being cleaned’ appears and the fine foam frother and the milk pipe are rinsed with fresh water.
5 Maintenance Inserting the filter Your JURA no longer has to be descaled if you are using the CLEARYL Smart filter cartridge. If you did not insert the filter cartridge the first time you used the machine, you can do this now as follows. Precondition: The start screen is displayed. T Remove and empty the water tank. T Fit the filter cartridge extension supplied on top of a CLEARYL Smart filter cartridge. T Insert the filter cartridge with its extension into the water tank.
5 Maintenance T Remove and empty the water tank. T Turn the filter cartridge anticlockwise and remove it along with the extension from the water tank. T Fit the filter cartridge extension on top of a new CLEARYL Smart filter cartridge. T Insert the filter cartridge with its extension into the water tank. T Turn the filter cartridge clockwise until it audibly clicks into place. T Fill the water tank with fresh, cold water and reinsert the tank. ‘Saved’ appears briefly on the display.
5 Maintenance J WARNING Harmful and irritating cleaning agent. Harmful if swallowed. Irritating to eyes and skin. T Keep children AWAY. T Avoid contact with skin and eyes. T Avoid generation of dust. Do not inhale dust. T After contact with skin, wash immediately with plenty of water. In case of skin irritation, seek medical advice. T After eye contact, immediately flush eyes with plenty of water and seek medical advice. T If swallowed, rinse mouth immediately and drink large quantities of water.
5 Maintenance T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. T Press the ‘Next’ button. ‘Machine is being cleaned’, water flows out of the coffee spout several times. The operation stops automatically. ‘Empty coffee grounds container’ T Empty the drip tray and coffee grounds container and put them back into the machine. Cleaning is now complete. The start screen is displayed.
5 Maintenance E The descaling program lasts approximately 40 minutes. E JURA descaling tablets are available from specialized dealers. E If the descaling agent comes into contact with sensitive surfaces (e.g. marble), damage cannot be ruled out. Clean up any splashes immediately. Precondition: ‘Decalcify machine’ is displayed. T Press the ‘ c ’ button (red Maintenance symbol). ‘Descale’ T Press the ‘Start’ button. T Press the ‘Next’ button.
5 Maintenance T Empty the receptacle and place it under the fine foam frother and the coffee spout. T Remove the water tank and rinse it thoroughly. T Fill the water tank with fresh, cold water and reinsert the tank. ‘Switch open’ T Turn the switch to the x position. ‘Machine is being descaled’, the descaling operation is continued. The operation is interrupted, ‘Switch close’. T Turn the switch to the ° position. ‘Machine is being descaled’, the descaling operation is continued.
5 Maintenance Descaling the water tank 38 Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time. T Remove the water tank. T If you use a CLEARYL Smart filter cartridge, remove this. T Completely fill the water tank and dissolve 3 JURA descaling tablets in it. T Leave the water tank with the descaling solution for several hours (e.g. overnight). T Empty the water tank and rinse it thoroughly.
6 Display messages 6 Display messages Message ‘Fill water tank’ Cause/Result The water tank is empty. You cannot prepare any products. ‘Empty coffee grounds container’ The coffee grounds container is full. You cannot prepare any products. T Empty the coffee grounds container and the drip tray (see Chapter 3 ‘Daily operation – Daily maintenance’). ‘Drip tray not fitted’ The drip tray is not inserted correctly or is not inserted at all. You cannot prepare any products. The bean container is empty.
7 Troubleshooting 7 Troubleshooting Problem Insufficient foam is produced when the milk is frothed or milk sprays out of the fine foam frother. Cause/Result The fine foam frother is dirty. Coffee only comes out in drips when it is being prepared. The coffee is ground too finely and obstructs the system. The water hardness may not have been correctly set. T Set the grinder to a coarser setting (see Chapter 2 ‘Preparation – Adjusting the grinder’).
7 Problem Other ‘ERROR’ messages are displayed. Cause/Result Troubleshooting Action – T Switch the JURA off with the On/ Off button Q. Contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’). E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’).
8 8 Transport and environmentally friendly disposal Transport and environmentally friendly disposal Transport / Emptying the system Keep the packaging for your JURA. It should be used to protect the machine during transport. In order to protect the JURA from frost during transport, the system must be emptied. Precondition: The start screen is displayed. T Remove the milk pipe from the fine foam frother. T Place a receptacle under the fine foam frother. T Press the ‘Milk foam’ button.
9 Technical data 9 Technical data Voltage Power Conformity mark 120 V ~, 60 Hz 1450 W Pump pressure Holding capacity of water tank (without filter) Holding capacity of bean container Holding capacity of coffee grounds container Cable length static, max. 15 bar 64 oz (1.9 l) Weight Dimensions (W × H × D) 10 oz (280 g) max. 16 portions approx. 47 in. (approx. 1.2 m) approx. 21.1 lb (approx. 9.6 kg) 11 × 13.8 × 17.3 in. (28.0 × 35.1 × 43.
10 Index 10 A B C Index Addresses 48 Adjusting the product settings 24 Aroma preservation cover Bean container with aroma preservation cover 8 Automatic switch-off 25 Bean container Bean container with aroma preservation cover 8 Cleaning 37 Filling 10 Bus bar Technical data 43 Button On/Off button 8 Cappuccino 16 Cappuccino frother rinsing 29 Central grounding point 43 Cleaning Bean container 37 Fine foam frother 30 Machine 33 CLEARYL Smart filter cartridge Changing 32 Insert 32 Coffee 16 Two coffees
10 I J L M P Product settings Adjusting 24 Programming mode 23 Automatic switch-off 25 Language 27 Setting the water hardness 26 Unit for amount of water 26 Important safeguards Safety 4 Internet 10 JURA Contact details 48 Internet 10 R Language 27 Machine Cleaning 33 Descaling 35 Regular maintenance 21 Rinsing 29 Setting up 10 Switching off 21 Switching on 20 Mains cord 8 Maintenance 28 Daily maintenance 20 Regular maintenance 21 Messages, display 39 Milk Connecting milk 14 Milk foam 17 Permanently
– intentionally blank – 46
– intentionally blank – 47
J72598/E6/US-en/201609 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Switzerland USA: JURA Inc. Canada: FAEMA Phone E-Mail 1-800-220-5701 info@us.jura.com 1-(855)-544-8600 info@juracanada.
