Owner Manual

2 Preparation

Hot coffee, hot steam and hot water can cause scalding. Scalding is

a serious burn.

T Use extreme care when handling hot liquid or steam.

T Allow liquid to cool down before drinking.

T In the event of scalding, rinse affected area with cold water

and seek medical attention.

T Keep children AWAY.

E You can stop the machine at any time while a specialty coffee,

steam or hot water is being prepared. Just press any button

(for a specialty coffee) or return the switch to its original

position (for steam and hot water).

E During the grinding operation you can select the coffee strength

of single products by pressing the

‘<’ and ‘>’ buttons.

E During preparation you can change the preset amount of

water and milk foam by pressing the

‘<’ and ‘>’ buttons.

E You can follow the current status of preparation on the display.

E The water volume is given as standard in ‘oz’. You can change

this setting to ‘ml’ in programming mode (see Chapter 4

‘Permanent settings in programming mode – Unit for amount

of water’).

Coffee tastes best served hot. A cold porcelain cup cools the bever-

age – and impairs the taste. We therefore recommend prewarming

the cups. The full coffee aroma can develop only in prewarmed cups.

You can purchase a JURA cup warmer from your specialized dealer.

You can make permanent settings for all products in programming

mode (see Chapter 4 ‘Permanent settings in programming mode –

Adjusting the product settings’).

J WARNING