Owner Manual

32
5 Maintenance
Your JURA no longer has to be descaled if you are using the CLEARYL
Smart filter cartridge. If you did not insert the filter cartridge the first
time you used the machine, you can do this now as follows.
Precondition:The start screen is displayed.
T Remove and empty the water tank.
T Fit the filter cartridge extension supplied on top of a CLEARYL
Smart filter cartridge.
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Saved’ appears briefly on the display.
‘Switch open’
T Place a receptacle (at least 10 oz or 300ml) under the fine
foam frother.
T Turn the switch to thex position.
‘Filter is being rinsed’, water flows out of the fine foam
frother.
Rinsing of the filter stops automatically after approximately
10 oz (300ml).
‘Switch close’ appears on the display.
T Turn the switch to the °position.
The start screen is displayed.
E If the filter is active, this is indicated by a blue filter symbol at
the bottom of the display.
E Once the filter cartridge stops working (depending on the
water hardness setting), the JURA will prompt you to change
the filter.
E CLEARYL Smart filter cartridges are available from specialized
dealers.
Precondition:The start screen is displayed. The filter symbol at the
bottom of the display lights up red.
Inserting the filter
Changing the filter