Owner's Manual

31
4 Permanent settings in programming mode
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Maintenance settings’
 O T Press the P button to exit programming mode.
‘Please select product:’
The harder the water is, the more frequently the GIGA needs to be
descaled. It is therefore important to set the water hardness accu-
rately.
The water hardness can be adjusted on a continuous scale between
1 °dH and 30 °dH.
Precondition:‘Please select product:’ is displayed.
 O T Press the P button.
‘Maintenance status (1/5)’
 g T Turn the Rotary Switch until the programme item ‘Machine
settings (3/5)’ is displayed.
T Press the ‘Maintenance settings’ button.
‘Maintenance settings’
T Press the ‘Water hardness’ button.
‘Water hardness’
T Press the ‘+’ or ‘ –’ button to set the water hardness.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Maintenance settings’
 O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Machine settings (3/5)’/ ‘Save energy’ you
can permanently set an energy-saving mode (Energy Save Mode,
E.S.M.
©
):
U
‘Save No’
U
All speciality coffees, speciality coffees with milk and hot
water can be prepared without having to wait.
U
‘Save Level1’
U
After switching on, your GIGA is only ready for use for speci-
ality coffees and hot water. Before you can prepare a special-
ity coffee with milk, the machine must heat up.
Setting the water
hardness
Energy-saving mode