Z6 Instructions for Use
Table of contents Your Z6 Control elements 4 Important information 6 Proper use ...................................................................................................................................................... 6 For your safety ............................................................................................................................................... 6 1 Preparing and using for the first time 10 JURA on the Internet ...................................................
Table of contents 5 6 7 8 9 10 11 Maintenance 35 Rinsing the machine ................................................................................................................................... 35 Automatic milk system rinsing ................................................................................................................. 35 Cleaning the milk system ..........................................................................................................................
Control elements Control elements 1 8 2 9 10 11 3 4 12 5 6 13 7 1 2 3 4 5 6 7 4 Cover for powder chute for ground coffee Powder chute for ground coffee Water tank Plug-in mains cable (back of the machine) Hot-water spout Coffee grounds container Drip tray 8 9 10 11 12 13 Cover cap for grinder adjustment switch Grinder adjustment switch On/Off button Q Bean container with aroma preservation cover Height- and width-adjustable dual spout Cup grille
Control elements 3 1 2 Front 1 Display 2 Multi-function buttons (button function depends on what is shown in the display) Accessories Container for milk system cleaning Top of the machine 3 Rotary Switch Measuring spoon for ground coffee Filler funnel for ground coffee 5
Important information Important information Proper use The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use. Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain.
Important information U U Never open and repair the machine yourself. Do not modify the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original spare parts and accessories. To completely and safely disconnect the machine from the power supply, first switch off the Z6 using the On/Off button.
Important information U U U U U U U U U U 8 Only connect the machine to the mains voltage in accordance with the information on the rating plate. The rating plate is located on the underside of your Z6. Further technical data is provided in these instructions for use (see Chapter 9 ‘Technical data’). Connect the Z6 directly to a domestic power socket. Using multi-socket adapters or extension cords may cause overheating. Please only use original JURA maintenance products.
Important information People, including children, who U do not have the physical, sensory or mental capabilities to use the machine safely or U are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly. Safety when handling the CLARIS Smart filter cartridge: U Filter cartridges should be kept out of the reach of children. U Store filter cartridges in a dry place in the sealed packaging.
1 Preparing and using for the first time 1 Preparing and using for the first time JURA on the Internet Visit us on the Internet. You can download short operating instructions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your Z6 and on every aspect of coffee. Setting up the machine When setting up your Z6, please note the following: Place the Z6 on a horizontal surface that is not sensitive to water.
1 Preparing and using for the first time T You will then be able to read the degree of water hardness from the discolouration of the Aquadur® test strip and the description on the packaging. First-time use When using the machine for the first time, you can choose whether you want to operate Z6 with or without the CLARIS Smart filter cartridge. If the water hardness is 10 °dH or more, we recommend using the filter cartridge.
1 Preparing and using for the first time T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Insert filter’ E Now decide whether you want to operate your Z6 with or without a CLARIS Smart filter cartridge. Operation with filter cartridge: go straight to the next section (see Chapter 1 ‘Preparing and using for the first time – First-time use with filter cartridge activation’).
1 Preparing and using for the first time ‘Use filter’ / ‘Saved’ ‘Filter is being rinsed’, the filter is rinsed. The water flows directly into the drip tray. ‘System is filling’, water flows out of the dual and hot-water spout. ‘Empty drip tray’ T Empty the drip tray and put it back into the machine. ‘Machine is heating’ ‘Machine is rinsing’, the system is rinsed. The rinse stops automatically. ‘Please select product’ appears on the display. Your Z6 is ready for use.
1 Preparing and using for the first time T Remove the water tank and rinse it with cold water. T Fill the water tank with fresh, cold water and reinsert the tank. ‘System is filling’, water flows out of the dual and hot-water spout. ‘Machine is heating’ ‘Machine is rinsing’, the system is rinsed. The rinse stops automatically. ‘Please select product’ appears on the display. Your Z6 is ready for use. E The display shows the products you can prepare.
2 Preparation 2 Preparation E You can stop the machine at any time while a speciality coffee or hot water is being prepared. To do this, press the ‘ ’ button. E During the grinding operation you can select the coffee strength of single products by turning the Rotary Switch. E During preparation, you can change the preset amounts (e.g. amount of water or milk foam) by turning the Rotary Switch. E You can follow the current status of preparation on the display. Coffee tastes best served hot.
2 Preparation Turn the Rotary Switch to bring the product you want into focus. Start preparation by pressing the Rotary Switch. The following additional products are shown in the product selector view: U ‘Ristretto’ U ‘Macchiato’ U ‘Flat White’ U ‘1 portion milk’ E The product selector view disappears automatically after 10 seconds if no preparation is started. E The last product selected always appears first in the product selector view.
2 Preparation 2 ristretti, 2 espressi and 2 coffees Example: Proceed as follows to prepare two coffees. Precondition: The start screen is displayed. T Place two cups under the dual spout. T Press the ‘Coffee’ button twice (within two seconds) to start preparation of 2 coffees. Coffee preparation starts. The preset amount of water for coffee flows into the cups. Preparation stops automatically. Your Z6 is once more ready for use.
2 Preparation Ground coffee You can choose to use a second coffee variety, for example decaffeinated coffee, with the filter funnel for ground coffee. E Never add more than two level measuring spoons of ground coffee. E Use ground coffee which is not ground too finely. Very fine coffee can block up the system so that the coffee only comes out in drips. E If you did not fill the machine with a sufficient amount of ground coffee, ‘Not enough ground coffee’ is displayed and the Z6 stops the operation.
2 Preparation T Press the ‘Espresso’ button. Preparation starts. ‘Espresso’, the preset amount of water for espresso flows into the cup. Preparation stops automatically. ‘Please select product’ appears on the display. Permanently setting the amount of water for the cup size It is easy to permanently adjust the amount of water for all single products to the cup size. Adjust the amount once as shown in the following example. Every time you prepare a drink in the future, this amount will be dispensed.
2 Preparation Adjusting the grinder CAUTION You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee. If you adjust the consistency of grind when the grinder is not operating, the grinder adjustment switch could be damaged. T Only adjust the consistency of grind when the grinder is running. The consistency of grind is correct if the coffee flows regularly from the coffee spout. In addition a fine, thick crema forms.
3 3 Daily operation Daily operation Switching on the machine Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily. T Place a receptacle under the dual spout. T Press the On/Off button Q to switch the Z6 on. ‘Welcome to JURA’ ‘Machine is heating’ ‘Machine is rinsing’, the system is rinsed. The rinse stops automatically. ‘Please select product’ appears on the display.
3 Daily operation Regular maintenance Carry out the following maintenance actions regularly or as required: In the interests of hygiene, we recommend changing the milk pipe and interchangeable milk spout on a regular basis (approximately every 3 months). Replacements are available from specialised dealers. Clean the inside of the water tank, e.g. with a brush. Further information about the water tank is provided in these instructions for use (see Chapter 5 ‘Maintenance – Descaling the water tank’).
4 4 Permanent settings in programming mode Permanent settings in programming mode Briefly press the Rotary Switch to enter programming mode. You can navigate through the programme items and permanently save the required settings simply by turning the Rotary Switch and using the multi-function buttons.
4 Permanent settings in programming mode Product settings In the programme item ‘Product settings’ you can make the following settings: ‘Expert mode’ U Set individual settings for all speciality coffees, milk and hot water (see Chapter 4 ‘Permanent settings in programming mode – Adjusting the product settings’). U Replace the products on the start screen and in the product selector with your favourites.
4 Product Espresso macchiato Portion of milk foam, Milk Hot water Coffee strength 10 levels Permanent settings in programming mode More settings Temperature (low, normal, high), Product name – Amount Coffee: 15 ml – 80 ml Milk foam: 0 sec. – 120 sec. Milk: 0 sec. – 120 sec. Interval: 0 sec. – 60 sec. Milk foam: 0 sec. – 120 sec.
4 Permanent settings in programming mode T Turn the Rotary Switch to change the fill volume setting. T Press the Rotary Switch to confirm the setting. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Expert mode’ / ‘Espresso’ T Press the ‘ button the number of times needed to display the start screen again.
4 Permanent settings in programming mode T Press the ‘Save’ button. ‘Macchiato’ E You can now change various settings for the product. To do this, briefly press the Rotary Switch to access the various setting options. Confirm the settings by pressing the ‘Save’ button. E If you do not want to change any more settings, just press the ‘ ’ button. T Press the ‘ button the number of times needed to display the start screen again.
4 Permanent settings in programming mode T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. The new product name is displayed. T Press the ‘ button the number of times needed to display the start screen again. Setting milk and milk foam temperature You can choose from ten levels for the milk and milk foam temperature. This setting applies to all products for which milk is used. Example: Proceed as follows to change the milk foam temperature.
4 Permanent settings in programming mode Precondition: ‘Please select product’ is displayed. T Press the Rotary Switch. ‘Maintenance status’ T Turn the Rotary Switch until ‘Machine settings’ is displayed. T Press the Rotary Switch. ‘Choose language’ T Turn the Rotary Switch until ‘Switch off after’ is displayed. T Press the Rotary Switch to enter the programme item. ‘Switch off after’ T Turn the Rotary Switch to change the switch-off time. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display.
4 Permanent settings in programming mode T Press the Rotary Switch to enter the programme item. ‘Save energy’ T Turn the Rotary Switch until ‘Inactive’ is displayed. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Save energy’ T Press the ‘ button the number of times needed to display the start screen again. Setting the water hardness The harder the water is, the more frequently the Z6 needs to be descaled. It is therefore important to set the water hardness accurately.
4 Display settings Permanent settings in programming mode In the programme item ‘Machine settings’ / ‘Display’ you can set the display brightness (as a percentage). Precondition: ‘Please select product’ is displayed. T Press the Rotary Switch. ‘Maintenance status’ T Turn the Rotary Switch until ‘Machine settings’ is displayed. T Press the Rotary Switch. ‘Choose language’ T Turn the Rotary Switch until ‘Display’ is displayed. T Press the Rotary Switch to enter the programme item.
4 Permanent settings in programming mode Restore factory settings In the programme item ‘Machine settings’ / ‘Factory setting’ the machine can be reset to its factory setting: All user settings (apart from the ‘filter’ and ‘water hardness’) are reset to factory settings. Your Z6 then switches off. Precondition: ‘Please select product’ is displayed. T Press the Rotary Switch. ‘Maintenance status’ T Turn the Rotary Switch until ‘Machine settings’ is displayed. T Press the Rotary Switch.
4 Permanent settings in programming mode T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Water tank illumination’ T Press the ‘ button the number of times needed to display the start screen again. Language In this programme item you can set the language used by your Z6. Example: Proceed as follows to change the language from ‘English’ to ‘Deutsch’. Precondition: ‘Please select product’ is displayed. T Press the Rotary Switch.
4 Permanent settings in programming mode Example: Proceed as follows to view the number of speciality coffees prepared. Precondition: ‘Please select product’ is displayed. T Press the Rotary Switch. ‘Maintenance status’ T Turn the Rotary Switch until ‘Machine settings’ is displayed. T Press the Rotary Switch. ‘Choose language’ T Turn the Rotary Switch until ‘Product counter’ is displayed. T Press the Rotary Switch to enter the programme item.
5 5 Maintenance Maintenance Your Z6 has the following integrated maintenance programmes: Rinsing the machine Rinsing the milk system in the dual spout Cleaning the milk system in the dual spout (‘Clean the milk system’) Changing the filter (‘Change the filter’) (only if filter is activated) Cleaning the machine (‘Clean’) Descaling the machine (‘Descale’) (only if filter is not activated) U U U U U U E Clean or descale the machine, rinse the milk system or change the filter when you are prompted to do s
5 Maintenance Cleaning the milk system To ensure that the milk system in the dual spout always works properly, you must clean it daily when you have been preparing milk. CAUTION If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. E JURA milk system cleaner is available from specialised dealers. E To clean the milk system, use the container supplied.
5 Dismantling and rinsing the dual spout Maintenance The dual spout must be dismantled and rinsed daily if milk has been prepared to make sure it functions perfectly and also in the interests of hygiene. T Remove the milk pipe and rinse it thoroughly under running water. T Press the releasing devices and pull the cover of the dual spout up and off. T Remove the milk system from the dual spout. T Dismantle the milk system into its individual parts. T Rinse all the parts under running water.
5 Maintenance T Fit the assembled individual parts back in the dual spout and press it firmly. T Fit the cover of the dual spout. Make sure the cover of the dual spout is correctly fitted. T Connect the milk pipe to the dual spout. Inserting the filter Your Z6 no longer has to be descaled if you are using the CLARIS Smart filter cartridge. If you did not insert the filter cartridge the first time you used the machine, you can do this now as follows. Precondition: ‘Please select product’ is displayed.
5 Maintenance E The machine automatically detects that you have just inserted the filter cartridge. ‘Use filter’ / ‘Saved’ ‘Filter is being rinsed’, the filter is rinsed. The water flows directly into the drip tray. ‘Empty drip tray’ T Empty the drip tray and put it back into the machine. ‘Use filter’, ‘Filter rinsing complete’ ‘Please select product’ appears on the display. Your Z6 is once more ready for use.
5 Maintenance ‘Change the filter’ / ‘Saved’ ‘Filter is being rinsed’, the filter cartridge is rinsed. The water flows directly into the drip tray. ‘Empty drip tray’ T Empty the drip tray and put it back into the machine. ‘Change the filter’, ‘Filter rinsing complete’ ‘Please select product’ appears on the display. Your Z6 is once more ready for use. Cleaning the machine CAUTION After 180 preparations or 80 switch-on rinses, the Z6 will prompt you to clean it.
5 Maintenance T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. ‘Press the Rotary Switch’ T Press the Rotary Switch. ‘Machine is being cleaned’, water flows out of the dual spout repeatedly. The operation stops automatically. ‘Empty coffee grounds container’ T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Please select product’ appears on the display. Cleaning is now complete.
5 Maintenance E The descaling programme lasts approximately 45 minutes. E JURA descaling tablets are available from specialised dealers. Precondition: ‘Decalcify machine’ is displayed. T Press the Rotary Switch. ‘Descale’ T Press the Rotary Switch again. ‘Descale’ T Press the ‘Start’ button. T Press the ‘Start’ button again. ‘Empty drip tray’ T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Pour descaling agent into water tank’ T Remove and empty the water tank.
5 Maintenance T Press the Rotary Switch. ‘Machine is being descaled’, the descaling operation is continued, water flows out of the dual spout and the hot water spout. ‘Empty drip tray’ T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Please select product’ appears on the display. Descaling is now complete. E If the descaling operation stops unexpectedly, rinse the water tank thoroughly. Descaling the water tank Limescale deposits may form in the water tank.
6 Display messages 6 Display messages Message ‘Fill water tank’ Cause/Result The water tank is empty. You cannot prepare any products. ‘Empty coffee grounds container’ The coffee grounds container is full. You cannot prepare any products. T Empty the coffee grounds container and the drip tray (see Chapter 3 ‘Daily operation – Daily maintenance’). ‘Drip tray not fitted’ The drip tray is not inserted correctly or is not inserted at all. You cannot prepare any products. The bean container is empty.
7 7 Troubleshooting Troubleshooting Problem Insufficient foam is produced when the milk is frothed, or milk sprays from the dual spout. Cause/Result The dual spout is dirty. The milk and milk foam temperature is set too high. Coffee or ground coffee has been ground too finely and is blocking the system. The water hardness may not have been correctly set. There is a lot of limescale ‘Fill water tank’ is not displayed although the in the water tank. water tank is empty.
7 Troubleshooting E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’).
8 8 Transport and environmentally friendly disposal Transport and environmentally friendly disposal Transport / Emptying the system Keep the packaging for your Z6. It should be used to protect the machine during transport. In order to protect the Z6 from frost during transport, the system must be emptied. Precondition: ‘Please select product’ is displayed. T Remove the milk pipe from the dual spout. T Place a receptacle under the dual spout. T Press the ‘1 portion milk foam’ button.
9 Technical data 9 Technical data Voltage Power Conformity mark Energy consumption ‘Save energy’ / ‘Active’ Energy consumption ‘Save energy’ / ‘Inactive’ Pump pressure Holding capacity of water tank Holding capacity of bean container Holding capacity of coffee grounds container Cable length Weight Dimensions (W H D) 220–240 V ~, 50 Hz 1450 W A approx. 6 Wh approx. 16 Wh static, max. 15 bar 2.4 l 280 g max. 20 portions approx. 1.1 m approx. 11.5 kg 32 37.
10 10 A B C Index Index Adding products to the start screen 26 Addresses 52 Adjusting the product settings 24 Aroma preservation cover Bean container with aroma preservation cover 4 Automatic switch-off 28 Bean container Bean container with aroma preservation cover 4 Cleaning 43 Filling 10 Bus bar Technical data 48 Button On/Off button 4 Caffè latte 17 Cappuccino 17 Cappuccino frother cleaning Cleaning the milk system 36 Central grounding point 48 Changing a name 27 Changing the product assigned to a
10 G H I J L M Index Grinder adjustment switch 4 Ground coffee 18 Measuring spoon for ground coffee 5 Powder chute for ground coffee 4 Grounding point 48 Hotline 52 Hot water 20 Hot-water spout 4 Instant coffee Ground coffee 18 Internet 10 JURA Contact details 52 Internet 10 Language 33 Latte macchiato 17 Machine Cleaning 40 Descaling 41 Regular maintenance 22 Rinsing 35 Setting up 10 Switching off 22 Switching on 21 Mains cable 4 Maintenance 35 Daily maintenance 21 Regular maintenance 22 Measuring s
10 Q R S T U Querying information 33 Regular maintenance 22 Renaming a product 27 Rinsing Machine 35 Ristretto 16, 17 2 ristretti 17 Rotary Selection 15 Rotary Switch 5 Index Water tank 4 Descaling 43 Filling 14 Water tank illumination 32 Website 10 Safety 6 Safety information 6 Settings Permanent settings in programming mode 23 Setting up Setting up the machine 10 Short operating instructions 10 Spout Height- and width-adjustable dual spout 4 Hot-water spout 4 Switching off 22 Switching on 21 Switc
J71819/Z6/en/201510 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233 @ You will find additional contact details for your country at www.jura.com.