E6/E60 – Quick Reference Guide
E6/E60 – Quick Reference Guide E6/E60 – Quick Reference Guide J These short instructions do not replace the ‘E6/E60 Instructions for Use’. Make sure you read and observe the safety information and warnings first in order to avoid hazards. Rinsing the machine You can start coffee system rinsing manually at any time. Precondition: The start screen is displayed. T Place a receptacle under the coffee spout. T Press the ‘ c ’ button (white Maintenance symbol).
E6/E60 – Quick Reference Guide Cleaning the fine foam frother CAUTION To ensure that the fine foam frother always works properly, you must clean it daily when you have been preparing milk. If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. EE JURA milk system cleaner is available from specialised dealers. Precondition: The start screen is displayed. T Press the ‘ P ’ button.
E6/E60 – Quick Reference Guide ‘Milk system is being cleaned’ appears and the fine foam frother and the milk pipe are rinsed with fresh water. ‘Switch close’ T Turn the switch to the ° position. The start screen is displayed. Dismantling and rinsing the fine foam frother To make sure the fine foam frother works properly, and in the interests of hygiene, it must be dismantled and rinsed daily if you have been preparing milk. Your JURA will not prompt you to dismantle and rinse the frother.
E6/E60 – Quick Reference Guide T Insert the filter cartridge with its extension into the water tank. T Turn the filter cartridge clockwise until it audibly clicks into place. T Fill the water tank with fresh, cold water and reinsert the tank. EE The machine automatically detects that you have just inserted the filter cartridge. ‘Saved’ appears briefly on the display. ‘Switch open’ T Place a receptacle (at least 300 ml) under the fine foam frother. T Turn the switch to the x position.
E6/E60 – Quick Reference Guide T Fit the filter cartridge extension on top of a new CLARIS Smart filter cartridge. T Insert the filter cartridge with its extension into the water tank. T Turn the filter cartridge clockwise until it audibly clicks into place. T Fill the water tank with fresh, cold water and reinsert the tank. ‘Saved’ appears briefly on the display. The machine has automatically detected that you have just changed the filter cartridge.
E6/E60 – Quick Reference Guide T Rinse off the descaling agent with clean water. Should you get any descaling agent in your eye, see a doctor. CAUTION If the wrong descaling agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. CAUTION If the descaling operation is interrupted, there may be damage to the machine. T Allow the descaling programme to run to the end.
E6/E60 – Quick Reference Guide T Place a receptacle under the fine foam frother. T Turn the switch to the x position. ‘Machine is being descaled’ appears and water flows out of the fine foam frother repeatedly. The operation is interrupted, ‘Switch close’. T Turn the switch to the ° position. ‘Machine is being descaled’, the descaling operation is continued. The operation is interrupted, ‘Empty drip tray’. T Empty the drip tray and coffee grounds container and put them back into the machine.