Operation Manual
19
4 Permanent settings in programming mode
4 Permanent settings in programming mode
By instructing your D4 to automatically switch itself off, you can cut
down your energy consumption. If this function is activated, your
D4 switches off automatically after the preset time following the last
action on the machine.
The number of symbols that are lit up indicates the activated switch-
off time:
Switch-off time Symbol(s) shown in display
30minutes
The ; symbol lights up brightly.
1hour
The ; and : symbols light up brightly.
2hours
The ;, : and _ symbols light up brightly.
Example:Proceed as follows to change the switch-off time from
30minutes to 1hour.
Precondition:Your D4 is ready for use.
T Touch the Double Product symbol ‘2x’ for approximately
2 seconds.
The ‘2x’, <, >, L and & symbols light up brightly.
T Touch the Espresso symbol <.
T Touch the : symbol.
T Touch the Espresso symbol < to confirm the switch-off time
setting.
Your D4 is once more ready for use.
Automatic switch-off