D6/D60 Instructions for Use
Table of contents Your D6/D60 Control elements 4 Important information 6 Proper use ...................................................................................................................................................... 6 For your safety ............................................................................................................................................... 6 1 Preparing and using for the first time 10 JURA on the Internet ...............................................
Table of contents 6 Display messages 33 7 Troubleshooting 34 8 Transport and environmentally friendly disposal 35 Transport / Emptying the system............................................................................................................. 35 Disposal.........................................................................................................................................................
Control elements Control elements 9 1 10 2 11 12 3 13 14 4 15 5 6 7 8 1 2 3 4 5 6 7 8 On/Off button Q Water tank cover Water tank Mains cable (back of the machine) Height-adjustable coffee spout Coffee grounds container Drip tray Cup grille 9 10 11 12 13 14 15 4 Cover of filler funnel for cleaning tablet Filler funnel for cleaning tablet Bean container cover Grinder adjustment switch Bean container with aroma preservation cover Switch for hot water and milk foam preparation Fine foam frother
Control elements 1 nnnnnnnn 2 1 2 Display Rotary Switch O c n 3 4 5 3 4 5 O c n P symbol (programming) Maintenance symbol Milk foam symbol Service socket for optional JURA Smart Connect (under cover) 5
Important information Important information Proper use The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use. Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain.
Important information U U Never open and repair the machine yourself. Do not modify the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original spare parts and accessories. To completely and safely disconnect the machine from the power supply, first switch off the D6 using the On/Off button.
Important information U U U U U U U U U U U 8 Before cleaning, switch the D6 off with the On/ Off button. Always wipe the D6 with a damp cloth rather than a wet one, and protect it from prolonged exposure to water splash. Only connect the machine to the mains voltage in accordance with the information on the rating plate. The rating plate is located on the underside of your D6. Further technical data is provided in these instructions for use (see Chapter 9 ‘Technical data’).
Important information People, including children, who U do not have the physical, sensory or mental capabilities to use the machine safely or U are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly. Safety when handling the CLARIS Smart filter cartridge: U Filter cartridges should be kept out of the reach of children. U Store filter cartridges in a dry place in the sealed packaging.
1 Preparing and using for the first time 1 Preparing and using for the first time JURA on the Internet Visit us on the Internet. You can download short operating instructions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your D6 and on every aspect of coffee. If you need assistance with using your machine, you can find this at www.jura.com/service.
1 Preparing and using for the first time Determining the water hardness When you use the machine for the first time, you must set the water hardness. If you do not know the hardness of your water, you can find this out first. Use the Aquadur® test strips supplied with the machine. T Hold the test strip briefly (for 1 second) under flowing water. Shake off the water. T Wait for about 1 minute.
1 Preparing and using for the first time T Turn the Rotary Switch to change the water hardness setting, e.g. to 25 °dH. T Press the Rotary Switch. OK appears briefly on the display. INSERT FILTER T Open the water tank cover. T Remove the water tank and rinse it with cold water. T Open the filter holder. T Insert the CLARIS Smart filter cartridge into the water tank, exerting slight pressure. T Close the filter holder. It will click into place audibly.
1 Preparing and using for the first time T Empty the drip tray and coffee grounds container and put them back into the machine. T Place a receptacle under the coffee spout. HEATING RINSING, the system is rinsed. Water flows out of the coffee spout. The rinse stops automatically. CAPPUCC. appears on the display. Your D6 is ready for use. Connecting milk Your D6 creates fine, creamy, feather-light milk foam with a perfect consistency.
2 Preparation 2 Preparation Basic information about preparing drinks: During the grinding operation you can select the coffee strength of single products by turning the Rotary Switch: MILD, NORMAL, STRONG or EXTRA. During preparation, you can change the preset amounts (e.g. amount of water or milk foam) by turning the Rotary Switch. You can stop preparation at any time. Just press the Rotary Switch (for a speciality coffee) or return the switch to its original position (for milk foam and hot water).
2 Preparation Two speciality coffees at the touch of a button When you prepare two speciality coffees at once, the amount of water selected for the single product is used for each cup. The preparation of two espressi and two coffees follows this same model. Example: Proceed as follows to prepare two espressi. Precondition: CAPPUCC. is displayed (example). T Place two espresso cups under the coffee spout. T Turn the Rotary Switch until ESPRESSO is displayed.
2 Preparation T Turn the switch to the ° position. Coffee preparation starts. The preset amount of water for espresso flows into the cup. Preparation stops automatically. CAPPUCC. appears on the display. To ensure that the fine foam frother always works properly, you must clean it daily when you have been preparing milk (see Chapter 5 ‘Maintenance – Cleaning the fine foam frother’). Milk foam Precondition: CAPPUCC. is displayed (example). Milk is connected to the fine foam frother.
2 Preparation Permanently setting the amount of water for the cup size It is easy to make permanent settings for the amount of water for all speciality coffees according to the cup size. Adjust the amount once as shown in the following example. Every time you prepare a drink in the future, this amount of water will be dispensed. The process for permanently adapting the amount of water to the cup size is the same for all speciality coffees.
2 Preparation Example: Proceed as follows to change the consistency of grind during the preparation of an espresso. T Place a cup under the coffee spout. T Open the bean container cover and remove the aroma preservation cover. T Turn the Rotary Switch until ESPRESSO is displayed. T Press the Rotary Switch to start preparation. T Turn the grinder adjustment switch to the desired position while the grinder is running. The preset amount of water flows into the cup. Preparation stops automatically.
3 3 Daily operation Daily operation Filling the water tank CAUTION Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily. Milk, sparkling mineral water or other liquids can damage the water tank or the machine. T Only fill the water tank with fresh, cold water. T Open the water tank cover. T Remove the water tank and rinse it with cold water.
3 Daily operation T Refit the coffee grounds container and the drip tray. T Rinse the water tank with clean water. T Clean the fine foam frother (see Chapter 5 ‘Maintenance – Cleaning the fine foam frother’). T Remove the milk pipe and rinse it thoroughly under running water. T Dismantle and rinse the fine foam frother (see Chapter 5 ‘Maintenance – Dismantling and rinsing the fine foam frother’). T Wipe the surface of the machine with a clean, soft, damp cloth (e.g. microfibre cloth).
3 Daily operation If milk has been prepared but you have not started milk system cleaning, you will be prompted to carry out milk system rinsing first (M-RINSE). OPEN SWITCH T Turn the switch to the m position. nnnkkkkk, the milk system is rinsed. The rinse stops automatically. CLOSE SWITCH T Turn the switch to the ° position. RINSING, the system rinses itself. The rinse stops automatically. Your D6 is switched off.
4 Permanent settings in programming mode 4 Permanent settings in programming mode You can make permanent settings in programming mode. You can navigate through the programme items and permanently save the required settings simply by turning and pressing the Rotary Switch. You can make the following settings with the Rotary Switch: Programme item Sub-item Explanation RINSE M-RINSE, M-CLEAN, RINSE, CLEAN, DESCALE T Select the desired maintenance programme.
4 Product Milk foam Hot water 2 cups Permanent settings in programming mode Amount Coffee strength Temperature Milk foam: – – 3 SEC. – 60 SEC. – – Water: 25 ML – 450 ML When you prepare two speciality coffees at once, the temperature and amount of water selected for the single product are used for each cup. Permanent settings in programming mode always follow the same model. Example: Proceed as follows to change the coffee strength for one coffee from NORMAL to STRONG. Precondition: CAPPUCC.
4 Permanent settings in programming mode Setting the water hardness The harder the water is, the more frequently the D6 needs to be descaled. It is therefore important to set the water hardness accurately. The water hardness was set when the machine was first used. You can change this setting at any time. The water hardness can be adjusted on a continuous scale between 1 °dH and 30 °dH. Precondition: CAPPUCC. is displayed (example).
4 Permanent settings in programming mode T Touch the P symbol to exit programming mode. CAPPUCC. (example) Unit for amount of water In the programme item UNITS you can set the unit used for the amount of water. Example: Proceed as follows to change the unit for the amount of water from ML to OZ. Precondition: CAPPUCC. is displayed (example). T Touch the P symbol for approximately 2 seconds until RINSE appears on the display. T Turn the Rotary Switch until UNITS is displayed.
5 5 Maintenance Maintenance Your D6 has the following integrated maintenance programmes: Cleaning the fine foam frother (M-CLEAN) Cleaning the machine (CLEAN) Descaling the machine (DESCALE) U U U E Proceed with the maintenance programmes when prompted to do so. E You can start the maintenance programmes at any time in programming mode (programme item RINSE). Rinsing the fine foam frother Ten minutes after milk preparation, the D6 prompts you to perform milk system rinsing.
5 Maintenance T Turn the Rotary Switch until M-CLEAN is displayed. T Press the Rotary Switch. CLEANER / WATER T Remove the milk pipe from the milk container or milk cooler. T Pour 250 ml of fresh water into a receptacle and add 1 capful of milk system cleaner. T Immerse the milk pipe in the receptacle. T Place a receptacle under the fine foam frother. T Press the Rotary Switch. M-CLEAN, OPEN SWITCH, the light segment on the switch lights up. T Turn the switch to the m position.
5 Maintenance T Dismantle the fine foam frother into its individual parts. T Rinse all the parts under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in a solution of 250 ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly. T Re-assemble the fine foam frother. E Ensure that all individual parts are correctly and firmly connected to ensure optimum operation. T Firmly attach the fine foam frother to the Connector System©.
5 Maintenance Rinsing of the filter stops automatically. CLOSE SWITCH T Turn the switch to the ° position. CAPPUCC. (example) Cleaning the machine CAUTION After 180 preparations or 80 switch-on rinses, the D6 will prompt you to clean it. If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. E The cleaning programme lasts approximately 20 minutes. E Do not interrupt the cleaning programme.
5 Maintenance T Empty the drip tray and coffee grounds container and put them back into the machine. CAPPUCC. (example) Descaling the machine The D6 builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcification depends on the hardness of your water. J CAUTION If the descaling agent comes into contact with the skin or eyes, this can cause irritation. T Avoid contact with the skin or eyes.
5 Maintenance T Completely dissolve 3 JURA descaling tablets in a receptacle holding 500 ml of water. This may take several minutes. T Pour the solution into the empty water tank and insert it into the machine. OPEN SWITCH, the light segment on the switch lights up. T Place a receptacle under the fine foam frother. T Turn the switch to the m position. DESCALE appears and water flows out of the fine foam frother repeatedly. The Maintenance symbol c flashes during the descaling operation.
5 Maintenance Cleaning the bean container Coffee beans may be covered with a slight oil film which remains on the walls of the bean container. These traces may negatively affect the coffee result. For this reason clean the bean container from time to time. Precondition: FILL BEANS is displayed. T Press the On/Off button Q to switch the D6 off. T Open the bean container cover and remove the aroma preservation cover. T Clean the bean container with a soft, dry cloth.
6 Display messages 6 Display messages Message FILL TANK Cause/Result The water tank is empty. You cannot prepare any products. Action T Fill the water tank (see Chapter 3 ‘Daily operation – Filling the water tank’). EMPTY TRAY The drip tray is full. No speciality coffees can be prepared. You can prepare hot water and milk foam. T Empty the coffee grounds container and the drip tray (see Chapter 3 ‘Daily operation – Daily maintenance’).
7 Troubleshooting 7 Troubleshooting Problem Insufficient foam is produced when the milk is frothed or milk sprays out of the fine foam frother. Cause/Result The fine foam frother is dirty. Coffee only comes out in drips when it is being prepared. The coffee is ground too finely and obstructs the system. T Set the grinder to a coarser setting (see Chapter 2 ‘Preparation – Adjusting the grinder’). The water hardness may not have been correctly set. The water tank float is trapped.
8 8 Transport and environmentally friendly disposal Transport and environmentally friendly disposal Transport / Emptying the system Keep the packaging for your D6. It should be used to protect the machine during transport. In order to protect the D6 from frost during transport, the system must be emptied. Precondition: CAPPUCC. is displayed (example). T Remove the milk pipe from the fine foam frother. T Place a receptacle under the fine foam frother. T Touch the Milk foam symbol n.
9 Technical data 9 Technical data Voltage Power Conformity mark Pump pressure Holding capacity of water tank Holding capacity of bean container Holding capacity of coffee grounds container Cable length Weight Dimensions (W H D) 36 220–240 V ~, 50 Hz 1450 W A static, max. 15 bar 1.9 l 200 g max. 16 portions approx. 1.1 m approx. 8.7 kg 28 34.5 41.
10 10 A B C Index Index Addresses 40 Aroma preservation cover Bean container with aroma preservation cover 4 Automatic switch-off 24 Bean container Bean container with aroma preservation cover 4 Cleaning 32 Filling 10 Bus bar Technical data 36 Button On/Off button 4 Cappuccino 15 CLARIS Smart filter cartridge Changing 28 Inserting 28 Cleaning Bean container 32 Fine foam frother 26 Machine 29 Coffee 14 Coffee grounds container 4 Coffee spout Height-adjustable coffee spout 4 Consistency of grind Adjusti
10 I J L M P 38 Index Programming mode 22 Automatic switch-off 24 Language 25 Product settings 22 Setting the water hardness 24 Unit for amount of water 25 Proper use 6 Internet 10 JURA Contact details 40 Internet 10 Language 25 Machine Cleaning 29 Daily maintenance 19 Descaling 30 Regular maintenance 20 Setting up 10 Switching off 20 Switching on 19 Mains cable 4 Maintenance 26 Daily maintenance 19 Regular maintenance 20 Messages, display 33 Milk Connecting milk 13 Milk foam 16 Milk system Cleaning
10 Index W Water hardness Determining the water hardness 11 Setting the water hardness 24 Water tank 4 Descaling 32 Filling 19 Website 10 39
J73431/D6-D60/en/201708 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233 @ You will find additional contact details for your country at www.jura.com. @ If you need assistance with using your machine, you can find this at www.jura.com/service.