Operation Manual
11
1 Preparing and using for the first time
When you use the machine for the first time, you must set the water
hardness. If you do not know the hardness of your water, you can
find this out first. Use the Aquadur® test strips supplied with the
machine.
T Hold the test strip briefly (for 1second) under flowing water.
Shake off the water.
T Wait for about 1minute.
T You will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
Precondition:The bean container has been filled.
T Insert the mains plug into a power socket.
T Press the On/Off button Q to switch the D6 on.
SPRACHE DE appears on the display.
T Turn the Rotary Switch until the required language is dis-
played, e.g.
LANGUAGE EN.
T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
HARDNESS, 16°dH
E If you do not know the hardness of your water, you can find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
Determining the water
hardness
First-time use
J
WARNING
CAUTION
nnnnnnnn
cOn