Operation Manual

15
2 Preparation
When you prepare two speciality coffees at once, the amount of
water selected for the single product is used for each cup.
The preparation of twoespressi and twocoffees follows this same
model.
Example:Proceed as follows to prepare two espressi.
Precondition:
CAPPUCC. is displayed (example).
T Place two espresso cups under the coffee spout.
T Turn the Rotary Switch until
ESPRESSO is displayed.
T Press the Rotary Switch twice (within 2seconds) to start
preparation of two espressi.
2CUPS
Preparation starts. The preset amount of water flows into
the cups.
Preparation stops automatically.
ESPRESSO appears on
the display.
Your D6 can prepare a cappuccino at the touch of a button. There is
no need to move the cup.
Precondition:
CAPPUCC. is displayed. Milk is connected to the
fine foam frother.
T Place a cup under the coffee spout and the fine foam frother.
E Ensure that the filling height of the milk is no higher than the
milk pipe connection on the fine foam frother.
T Press the Rotary Switch.
CAPPUCC.
HEATING
As soon as the machine has heated up, OPEN SWITCH
appears, the light segment on the switch lights up.
T Turn the switch to them position.
The milk foam is prepared. Preparation stops automatically
when the preset amount of milk foam is reached.
CLOSE SWITCH
Two speciality coffees at
the touch of a button
Cappuccino