Operation Manual

16
2 Preparation
T Turn the switch to the °position.
Coffee preparation starts. The preset amount of water for
espresso flows into the cup.
Preparation stops automatically.
CAPPUCC. appears on
the display.
To ensure that the fine foam frother always works properly,
you must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the fine foam frother’).
Precondition:
CAPPUCC. is displayed (example). Milk is con-
nected to the fine foam frother.
T Place a cup under the fine foam frother.
E Ensure that the filling height of the milk is no higher than the
milk pipe connection on the fine foam frother.
T Touch the Milk foam symboln.
HEATING/ MILK
As soon as the machine has heated up, MILK/ READY,
the light segment on the switch lights up.
T Turn the switch to them position.
The milk foam is prepared.
Preparation stops automatically when the preset amount of
milk foam is reached.
T Turn the switch to the °position.
MILK/ READY
E You can continue to prepare milk foam for the next 40sec-
onds or so without the machine having to heat up again.
To ensure that the fine foam frother always works properly,
you must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the fine foam frother’).
Milk foam