Operation Manual
22
4 Permanent settings in programming mode
4 Permanent settings in programming mode
You can make permanent settings in programming mode. You can
navigate through the programme items and permanently save the
required settings simply by turning and pressing the Rotary Switch.
You can make the following settings with the Rotary Switch:
Programme
item
Sub-item Explanation
RINSE M-RINSE,
M-CLEAN,
RINSE,
CLEAN,
DESCALE
T Select the desired maintenance programme.
BUTTONS
T Select your settings for speciality coffees.
HARDNESS 1°dH–30°dH
T You can set the water hardness of the water used.
OFF FROM 15MIN., 30MIN.,
1HRS.–9HRS.
T Set the time after which the D6 should switch off
automatically.
UNITS ML, OZ
T Select the unit for the amount of water.
LANGUAGE
T Select your language.
EXIT
T Exit programming mode.
E You can exit programming mode directly at any time. Simply
touch the P symbol for approximately 2 seconds.
In the programme item
BUTTONS you can make individual, per-
manent settings for all products:
Product Amount Coffee strength Temperature
Cappuccino Water:
25ML–240ML
Milk foam:
3SEC.–60SEC.
MILD, NORMAL,
STRONG, EXTRA
NORMAL,
HIGH
Espresso Water:
15ML–80ML
MILD, NORMAL,
STRONG, EXTRA
NORMAL,
HIGH
Coffee Water:
25ML–240ML
MILD, NORMAL,
STRONG, EXTRA
NORMAL,
HIGH
Product settings