Operation Manual

23
4 Permanent settings in programming mode
Product Amount Coffee strength Temperature
Milk foam Milk foam:
3SEC.–60SEC.
––
Hot water Water:
25ML–450ML
––
2 cups When you prepare two speciality coffees at once, the temperature and
amount of water selected for the single product are used for each cup.
Permanent settings in programming mode always follow the same
model.
Example:Proceed as follows to change the coffee strength for one
coffee from
NORMAL to STRONG.
Precondition:
CAPPUCC. is displayed (example).
T Touch the P symbol for approximately 2 seconds until
RINSE appears on the display.
T Turn the Rotary Switch until
BUTTONS is displayed.
T Press the Rotary Switch to enter the programme item.
ESPRESSO
T Turn the Rotary Switch until COFFEE is displayed.
T Press the Rotary Switch.
VOLUME
T Turn the Rotary Switch until STRENGTH is displayed.
T Press the Rotary Switch.
NORMAL
T Turn the Rotary Switch until STRONG is displayed.
T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
STRENGTH
T Turn the Rotary Switch until EXIT is displayed.
T Press the Rotary Switch to exit the programme item.
COFFEE
T Touch the P symbol to exit programming mode.
CAPPUCC. (example)