Operation Manual

28
5 Maintenance
T Dismantle the fine foam frother into its individual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 250ml cold water and 1 capful of JURA milk
system cleaner. Then rinse the parts thoroughly.
T Re-assemble the fine foam frother.
E Ensure that all individual parts are correctly and firmly con-
nected to ensure optimum operation.
T Firmly attach the fine foam frother to the Connector Sys-
tem
©
.
Your D6 no longer has to be descaled if you are using the CLARIS
Smart filter cartridge.
E Once the filter cartridge stops working (depending on the
water hardness setting), the D6 will prompt you to change the
filter.
E CLARIS Smart filter cartridges are available from specialised
dealers.
Precondition:
FILTER/ CAPPUCC. is displayed (example).
T Open the water tank cover.
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Smart
filter cartridge.
T Insert a new CLARIS filter cartridge Smart into the water
tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
The machine has automatically detected that you have just
inserted/changed the filter cartridge.
OPEN SWITCH, the light segment on the switch lights up.
T Place a receptacle under the fine foam frother.
T Turn the switch to them position.
FILTER RINSING, water flows out of the fine foam
frother.
Inserting/changing the
filter