Operation Manual

5 Maintenance

Your JURA has the following integrated maintenance programmes:

Rinsing the machine (‘Rinse the coffee system’)

Rinsing the fine foam frother (‘Rinse the milk system’)

Cleaning the fine foam frother (‘Clean the milk system’)

Changing the filter (‘Change the filter’)

Cleaning the machine (‘Clean’)

Descaling the machine (‘Descale’)

E Carry out each maintenance programme when you are

prompted to do so.

E Press the

‘P’ button to view a list of the maintenance pro-

grammes. When the bar is completely filled with red, your

JURA will prompt you to perform the appropriate mainte-

nance programme.

E Press the

‘ c’ button (white Maintenance symbol) to go

straight to the programme item

‘2/4’. Here you can start milk

system rinsing and coffee system rinsing or find out what

maintenance actions are required.

You can start coffee system rinsing manually at any time.

Precondition:The start screen is displayed.

T Place a receptacle under the coffee spout.

T Press the

‘c’ button (white Maintenance symbol).

T Press the

‘Rinse the coffee system’ button to start the rinse

operation.

‘Machine is rinsing’, water flows out of the coffee spout. The

operation stops automatically. The start screen is displayed.

After each milk preparation, the JURA prompts you to perform a milk

system rinse.

Precondition:

‘Rinse the milk system’ is displayed.

Rinsing the machine

Rinsing the fine foam

frother