Operation Manual

2 Preparation

E You can stop the machine at any time while a speciality coffee,

steam or hot water is being prepared. Just press any button

(for a speciality coffee) or return the switch to its original posi-

tion (for steam and hot water).

E During the grinding operation you can select the coffee

strength of single products by pressing the

‘<’ and ‘>’ but-

tons.

E During preparation you can change the preset amount of

water and milk foam by pressing the

‘<’ and ‘>’ buttons.

E You can follow the current status of preparation on the display.

Coffee tastes best served hot. A cold porcelain cup cools the bever-

age – and impairs the taste. We therefore recommend prewarming

the cups. The full coffee aroma can develop only in prewarmed cups.

You can purchase a JURA cup warmer from your specialised dealer.

You can make permanent settings for all products in programming

mode (see Chapter 4 ‘Permanent settings in programming mode –

Adjusting the product settings’).

Example:Proceed as follows to prepare one coffee.

Precondition:The start screen is displayed.

T Place a cup under the coffee spout.

T Press the

‘Coffee’ button.

Preparation starts.

‘Coffee’ and the coffee strength are dis-

played. The preset amount of water for coffee flows into the

cup.

Preparation stops automatically. Your JURA is once more

ready for use.

Espresso and coffee