Operation Manual

2 Preparation

E The display shows four products you can prepare. Press the

‘>’ button to display more products.

E You can stop the machine at any time while a speciality coffee

or hot water is being prepared. Just press any button.

E During the grinding operation you can select the coffee

strength of single products by pressing the

‘<’ and ‘>’ but-

tons.

E During preparation you can change the preset amounts (e.g.

water and amount of milk) by pressing the

‘<’ and ‘>’ but-

tons.

Coffee tastes best served hot. A cold porcelain cup cools the bever-

age – and impairs the taste. We therefore recommend prewarming

the cups. The full coffee aroma can develop only in prewarmed cups.

You can purchase a JURA cup warmer from your specialised dealer.

You can make permanent settings for all products in programming

mode (see Chapter 4 ‘Permanent settings in programming mode –

Adjusting the product settings’).

Your JURA prepares latte macchiato, cappuccino and flat white at the

touch of a button. There is no need to move the glass or cup.

E This chapter applies to the professional fine foam frother and

the fine foam frother.

Example:Proceed as follows to prepare one latte macchiato.

Precondition:The speciality coffees with milk are displayed. Milk is

connected to the fine foam frother.

T Place a glass under the fine foam frother.

E If you are using the professional fine foam frother, turn the

selector switch to the Milk Foam positioné.

T Press the

‘Latte macchiato’ button.

‘Latte macchiato’ appears and the preset amount of milk

foam flows into the glass.

Latte macchiato,

cappuccino and other

speciality coffees with

milk