Operation Manual

54
ENA 7
6 Display messages
Message Cause/Result Action
FILL WATER TANK
The water tank is empty. You
cannot prepare any products.
T Fill the water tank (see Chapter 1
‘Preparing and using for the first time’).
EMPTY GROUNDS
The coffee grounds container is
full. You cannot prepare any
speciality coffees or steam, but
you can prepare hot water.
T Empty the coffee grounds container
and the drip tray (see Chapter 3 ‘Daily
operation’).
TRAY MISSING
The drip tray is not inserted
correctly or is not inserted at all.
You cannot prepare any
speciality coffees, but you can
prepare hot water and steam.
T Insert the drip tray.
FILL BEANS
The bean container is empty.
You cannot prepare any
speciality coffees, but you can
prepare hot water and steam.
T Fill the bean container (see Chapter 1
‘Preparing and using for the first time’).
READY / CLEAN The ENA is prompting you to
clean it.
T Perform cleaning (see Chapter 5
‘Maintenance – Cleaning the machine’).
READY / DE-SCALE The ENA is prompting you to
descale it.
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the machine’).
READY / FILTER After 50 litres of water have
flowed through the CLARIS Blue
filter cartridge, it will cease to
work.
T Replace the CLARIS Blue filter
cartridge (see Chapter 5 ‘Mainte-
nance – Changing the filter’).
NOT ENOUGH
POWDER
There is insufficient preground
coffee in the machine; the ENA
stops the operation.
T The next time you prepare a
beverage, add more preground coffee
(see Chapter 2 ‘Preparation – Pre-
ground coffee’).
TOO HOT
The system is too hot to start a
maintenance programme.
T Wait for several minutes until the
system has cooled or prepare a
speciality coffee or hot water.
OPEN TAP
The system must be filled with
water. You cannot prepare any
products.
T Place a receptacle under the
cappuccino frother and turn the switch
anticlockwise to position m.