de en fr o9 micr it nl es Instructions for use for ENA Micro 9 One Touch The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-tounderstand style, its thoroughness and coverage of safety aspects.
Table of contents Your ENA Micro 9 One Touch Control elements 32 Important information 34 Proper use ...............................................................................................................................................................34 For your safety .......................................................................................................................................................34 1 Preparing and using for the first time 35 JURA on the Internet ..........
de Table of contents Descaling the machine ....................................................................................................................................... 48 Descaling the water tank..................................................................................................................................... 49 Cleaning the bean container ..............................................................................................................................
Control elements Control elements micro 9 1 2 3 4 5 32 Water tank Mains cable (back of the machine) Milk pipe Coffee grounds container Drip tray 6 7 8 9 Bean container with aroma preservation cover Hot-water spout Height-adjustable dual spout Cup grille
de Control elements en fr it nl es 1 Cover for powder chute for ground coffee 2 Powder chute for ground coffee 3 Display 4 c Maintenance button 5 / Cappuccino button 6 ( Latte Macchiato button 7 Rotary Switch status display 8 9 10 11 12 13 14 Cover cap for grinder adjustment switch Grinder adjustment switch g Rotary Switch m Hot Water button < Espresso button Q On/Off button > Coffee button pt ru 33
Important information Important information Proper use The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use. Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain.
de 1 Safety when handling the CLARIS Blue filter cartridge: Filter cartridges should be kept out of the reach of children. Store filter cartridges in a dry place in the sealed packaging. Protect cartridges from heat and direct sunlight. Do not use damaged filter cartridges. Do not open filter cartridges. U U U U U 1 Preparing and using for the first time This chapter provides you with the information you need to use your ENA without any problems.
1 Preparing and using for the first time Precondition: Bean container is filled. T Insert the mains plug into a power socket. Q T Press the On/Off button to switch the machine on. SPRACHE DEUTSCH g T Turn the Rotary Switch until the required language is displayed, for example LANGUAGE ENGLISH. T Close the filter holder. It will click into place audibly. E After two months, the filter will cease to work. Set the date on the date plate on the filter holder in the water tank.
de 1 First-time use without filter cartridge activation g T Turn the Rotary Switch until FILTER - / NO - is displayed. k T Press the Rotary Switch. Preparing and using for the first time T You will then be able to read the degree of water hardness from the discolouration of the Aquadur® test strip and the description on the packaging. en OK 16°dH g T Turn the Rotary Switch to change the water hardness setting, e.g. to 25°dH. k T Press the Rotary Switch.
2 Preparation < T Press the Espresso button to start preparation. T Turn the grinder adjustment switch to the desired position while the grinder is running. The preset amount of water flows into the cup. Preparation stops automatically. READY Filling the water tank Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily.
de 2 Preparation T Connect the milk pipe to the dual spout. micro 9 T Immerse the other end of the milk pipe in a receptacle with milk (figure: optional JURA 0.4 litre stainless steel vacuum milk container). micro 9 Permanently setting the amount of water for the cup size It is easy to make permanent settings for the amount of water for all speciality coffees and hot water according to the cup size. Adjust the amount once as shown in the following example.
3 Daily operation E If you did not fill the machine with a sufficient amount of ground coffee, NOT ENOUGH POWDER is displayed and the ENA stops the operation. E The desired speciality coffee must be prepared within approximately one minute after filling with the ground coffee. Otherwise the ENA stops the operation and is once more ready for use. The preparation of coffee, espresso, cappuccino and latte macchiato with ground coffee follows this model. Example: Prepare a cup of coffee using ground coffee.
de 4 T Dismantle and rinse the dual spout (see Chapter 5 ‘Maintenance – Dismantling and rinsing the dual spout’). T Wipe the surface of the machine with a clean, soft, damp cloth (e.g. microfibre cloth). E In the interests of hygiene, we recommend changing the milk pipe on a regular basis (approx. every 6 months). Replacement pipes are available from specialised dealers.
4 Permanent settings in programming mode k T Press the Rotary Switch to exit the programme item. PRODUCT g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode. Energy-saving mode The energy-saving mode (Energy Save Mode, E.S.M.
de 4 Automatic switch-off By instructing your ENA to automatically switch itself off, you can cut down your energy consumption. If this function is activated, your ENA switches off automatically after the preset time following the last action on the machine. The automatic switch-off can be set to between 15 minutes and 9 hours. Example: Change the switch-off time from 2 HRS to 1 HRS. Precondition: READY is displayed. k T Press and hold the Rotary Switch until RINSE appears.
5 Maintenance Unit for amount of water You can change the unit for the amount of water from ‘ml’ to ‘oz’. Example: Change the unit for the amount of water from ML to OZ. Precondition: READY is displayed. k T Press and hold the Rotary Switch until RINSE appears. g T Turn the Rotary Switch until DISPLAY is displayed. k T Press the Rotary Switch to enter the programme item. ML g T Turn the Rotary Switch until OZ is displayed. k T Press the Rotary Switch to confirm the setting.
de 5 g T Turn the Rotary Switch until RINSE is displayed. k T Press the Rotary Switch to initiate the rinse operation. RINSING, the system rinses itself. The operation stops automatically. READY Maintenance E JURA Cappuccino Cleaner is available from specialized dealers. k T Press and hold the Rotary Switch until RINSE appears. k T Press the Rotary Switch to enter the programme item. en C-CLEAN Rinsing the milk system After each milk preparation, the ENA prompts you to perform a cappuccino rinse.
5 Maintenance Dismantling and rinsing the dual spout The dual spout must be dismantled and rinsed daily if milk has been prepared to make sure it functions perfectly and also in the interests of hygiene. Your ENA will not prompt you to clean the dual spout. T Remove the milk pipe and rinse thoroughly under running water. T Press the releasing devices and pull the dual spout down and off. T Fit the air intake pipe. T Reassemble the milk system, noting the numbering on the parts.
de 5 Precondition: READY is displayed. k T Press and hold the Rotary Switch until RINSE appears. g T Turn the Rotary Switch until FILTER - is displayed. k T Press the Rotary Switch to enter the programme item. NO - g T Turn the Rotary Switch until YES p is displayed. k T Press the Rotary Switch to confirm the setting. OK INSERT FILTER T Remove and empty the water tank. T Open the filter holder. T Insert the filter cartridge into the water tank, exerting slight pressure.
5 Maintenance k T Press the Rotary Switch. FILTER RINSING, water flows out of the hot-water spout. E You can interrupt rinsing of the filter at any time by pressing any button. Press the Maintenance button c, to continue with rinsing of the filter. E The water may be slightly discoloured. This is not harmful to health and does not affect the taste. The operation is interrupted, ADD TABLET. T Open the powder chute for ground coffee and drop in a JURA cleaning tablet.
de 5 CAUTION If the descaling operation is interrupted, there may be damage to the machine. T Allow the descaling programme to run to the end. CAUTION If the descaling agent comes into contact with sensitive surfaces (e.g. marble), damage cannot be ruled out. T Clean up any splashes immediately. E The descaling programme lasts approximately 40 minutes. E JURA descaling tablets are available from specialized dealers.
5 Maintenance Cleaning the bean container Coffee beans may be covered with a slight oil film which remains on the walls of the bean container. These traces may negatively affect the coffee result. For this reason clean the bean container from time to time. Q T Press the On/Off button to switch the machine off. T Disconnect the mains plug. T Remove the bean container cover. T Remove the coffee beans with a vacuum cleaner. T Clean the bean container with a soft, dry cloth.
de 6 Display messages 6 Display messages Message Cause/Result Action FILL WATER TANK The water tank is empty or not correctly inserted. You cannot prepare any products. T Fill the water tank (see Chapter 1 ‘Preparing and using for the first time – Filling the water tank’). T Insert the water tank. EMPTY GROUNDS The coffee grounds container is full. No speciality coffees can be prepared, but hot water preparation is possible.
7 Troubleshooting 7 Troubleshooting Problem Cause/Result Action Insufficient foam is produced when the milk is frothed or milk sprays from the dual spout. The dual spout is dirty. T Clean the dual spout (see Chapter 5 ‘Maintenance – Cleaning the milk system’). T Dismantle and rinse the dual spout (see Chapter 5 ‘Maintenance – Dismantling and rinsing the dual spout’). Coffee only comes out in drips when it is being prepared.
de 8 8 Transport and environmentally friendly disposal Transport and environmentally 9 Technical data friendly disposal Voltage 220–240 V ~, 50 Hz Power 1450 W Keep the packaging for your ENA. It should be used to protect the machine during transport. Conformity mark AS Energy consumption Approx. 10.6 Wh In order to protect the ENA from frost during transport, the system must be emptied. ECONOMY - Precondition: READY is displayed. T Place a receptacle under the hot-water spout.
10 Index 10 A B C Index Addresses 56 Aroma preservation cover Bean container with aroma preservation cover 32 Automatic switch-off 43 Bean container Bean container with aroma preservation cover 32 Cleaning 50 Filling 35 Bus bar Technical data 53 Button Cappuccino button 33 Coffee button 33 Espresso button 33 Hot Water button 33 Latte Macchiato button 33 Maintenance button 33 On/Off button 33 Cappuccino 38 Cappuccino frother cleaning Cleaning the milk system 45 Cappuccino frother rinsing Rinsing the mi
de 10 L Language 44 Latte macchiato 38 R M Machine Cleaning 48 Descaling 48 Rinsing 44 Setting up 35 Switching off 41 Switching on 40 Mains cable 32 Maintenance Daily maintenance 40 Maintenance 44 Messages, display 51 Milk system Cleaning 45 Rinsing 45 P Permanently setting the water for the cup size 39 Permanent settings in programming mode 41 Powder chute Powder chute for ground coffee 33 Preparation 38 Cappuccino 38 Coffee 38 Espresso 38 Ground coffee 39 Hot water 40 Latte macchiato 38 Problems Tr
11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233 @ You will find additional contact details for your country at www.jura.com. Directives The machine complies with the following directives: 2006/95/EC – Low Voltage Directive 2004/108/EC – Electromagnetic Compatibility 2009/125/EC – Ecodesign Directive U U U Technical changes We reserve the right to make technical changes.
