GIGA 5 Instructions for Use The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.
Table of contents Your GIGA 5 Control elements 4 Important information 6 Proper use ...................................................................................................................................................... 6 For your safety ............................................................................................................................................... 6 1 Preparing and using for the first time 9 JURA on the Internet ................................................
Table of contents 5 6 7 8 9 10 11 Maintenance 36 Rinsing the coffee system .........................................................................................................................36 Rinsing the milk system............................................................................................................................. 37 Cleaning the milk system ..........................................................................................................................
Control elements Control elements 1 2 3 4 5 6 7 8 4 Bean container with aroma preservation cover Bean container status indicator Water tank cover Water tank Power switch and plug-in mains cable (back of the machine) Coffee grounds container Drip tray Cup grille 9 10 11 12 13 14 15 Filler funnel for ground coffee Ventilation slats (Venti Ports) Storage compartment cover Measuring spoon for ground coffee Height- and width-adjustable dual spout Splash guard He
Control elements Top of the machine 1 Q On/Off button 2 g Rotary Switch 3 O P button (programming) Front 4 Display 5 Multi-function buttons (button function depends on what is shown in the display) Back of the machine 1 Service cover (Open by pressing with your finger) 2 Locking device 3 4 Sliding catch Service socket (underneath cover) 5
Important information Important information Proper use The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use. Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain.
Important information U To completely and safely disconnect the machine from the power supply, first switch off the GIGA using the On/Off button and then at the power switch. Only then should you remove the mains plug from the power socket. There is a risk of scalds or burns on the spouts. Place the machine out of the reach of children. Do not touch any hot parts. Use the handles provided. U U A defective machine is not safe and could cause injury or fire.
Important information People, including children, who do not have the physical, sensory or mental capabilities to use the machine safely or are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly. U U Safety when handling the CLARIS Blue filter cartridge: Filter cartridges should be kept out of the reach of children. Store filter cartridges in a dry place in the sealed packaging.
1 1 Preparing and using for the first time Preparing and using for the first time JURA on the Internet Visit us on the Internet. You can download short operating instructions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your GIGA and on every aspect of coffee. Setting up the machine When setting up your GIGA, please note the following: Place the GIGA on a horizontal surface that is not sensitive to water.
1 Preparing and using for the first time Filling the bean container The bean containers have an aroma preservation cover. This will ensure that your coffee beans retain their aroma for longer. CAUTION Coffee beans which have been treated with additives (e.g. sugar), ground coffee or freeze-dried coffee will damage the grinders. T Only use untreated coffee beans to fill the bean containers. T Remove the aroma preservation cover. T Remove any dirt or foreign objects from inside the bean container.
1 Preparing and using for the first time Precondition: The water tank and bean containers have been filled. T Connect the mains cable to the machine. T Insert the mains plug into a power socket. 3 T Switch on the GIGA using the power switch on the back of the machine. Q T Press the On/Off button to switch the GIGA on. ‘Welcome to JURA’ appears on the display. The display then shows the languages you can choose from. E To display more languages, press the ‘Next’ button (bottom right).
1 Preparing and using for the first time T Place a receptacle under the dual spout. k T Press the Rotary Switch. ‘System is filling.’, the system fills up with water. The operation stops automatically. ‘Welcome to JURA’, ‘Machine is heating.’, ‘Press the Rotary Switch.’ appears on the display. k T Press the Rotary Switch. ‘Machine is rinsing.’, the machine rinses. The operation stops automatically. ‘Please select product:’ appears on the display. Your GIGA is ready for use.
1 Preparing and using for the first time T Remove and empty the water tank. T Open the filter holder and insert the filter cartridge into the water tank, exerting slight pressure. T Close the filter holder. It will click into place audibly. T Fill the water tank with fresh, cold water and reinsert the tank. k T Press the Rotary Switch. ‘Filter is being rinsed.’, the filter is rinsed. Rinsing of the filter stops automatically. ‘Empty drip tray.’ appears on the display.
1 Preparing and using for the first time T Place a receptacle under the dual spout. k T Press the Rotary Switch. ‘Machine is rinsing.’, the machine rinses. The operation stops automatically. ‘Please select product:’ appears on the display. Your GIGA is ready for use. Determining the water hardness You can find out what the water hardness is by using the Aquadur® test strip supplied as standard. T Hold the test strip briefly (for 1 second) under flowing water. Shake off the water.
2 Preparation 2 Preparation E While a product is being prepared, you can stop preparation at any time. To do this, press the Rotary Switch k or the ‘’ button. E During preparation, you can change the preset amounts (e.g. amount of milk foam or water) by turning the Rotary Switch g. E You can follow the current status of preparation on the display. Coffee tastes best served hot. A cold porcelain cup cools the beverage – and impairs the taste. We therefore recommend prewarming the cups.
2 Preparation Preparation at the touch of a button Speciality coffees at the touch of a button On the display (start screen), you will see different products, which you can prepare by simply pressing the corresponding button. A speciality coffee displayed on the start screen is always prepared in the same way. Example: Proceed as follows to prepare one coffee. Precondition: ‘Please select product:’ is displayed. T Place a cup under the dual spout. T Press the ‘Coffee’ button. Preparation starts.
2 Preparation Preparation using the product selector As soon as you turn the Rotary Switch, more products are displayed in a product selector. E The product selector view disappears automatically after 5 seconds if no preparation is started. Preparation of a speciality coffee using the product selector Ground coffee Example: Proceed as follows to prepare a milky coffee using the product selector. Precondition: ‘Please select product:’ is displayed, milk is connected to the dual spout.
2 Preparation Example: Proceed as follows to prepare one coffee using ground coffee. Precondition: ‘Please select product:’ is displayed. T Place a cup under the dual spout. T Open the cover of the filler funnel for ground coffee. ‘Please add ground coffee.’ T Place one level measuring spoon of ground coffee into the filler funnel. T Close the cover of the filler funnel. ‘Please select product:’, the speciality coffees you can prepare with ground coffee are displayed. T Press the ‘Coffee’ button.
2 Preparation T Press any button as soon as there is sufficient coffee in the cup. Preparation stops. ‘Saved’ appears briefly on the display. The set amount of water for one coffee is permanently stored. ‘Please select product:’ appears on the display. E You can alter this setting at any time by repeating the above procedure. E The amount can be permanently adjusted to the cup size for the products (apart from milky coffee) shown in the product selector too.
2 Preparation Preparation of a speciality coffee with grinder selection Example: Proceed as follows to prepare a coffee with coffee beans from the grinder on the left. Precondition: ‘Please select product:’ is displayed. ‘Beans à la carte’ mode is activated. T Place a cup under the dual spout. T Press the ‘+’ button on the left-hand side several times until the value is set to ‘100%’.
3 3 Daily operation Daily operation Switching on When the GIGA is switched on, it automatically prompts you to perform the rinse operation. Start the rinse operation by pressing the Rotary Switch k . In programming mode you can change this setting so that the machine starts the switch-on rinse automatically (see Chapter 4 ‘Permanent settings in programming mode – Maintenance settings’). Precondition: Your GIGA is switched on at the power switch. T Place a receptacle under the dual spout.
3 Daily operation Switching off When you switch off your GIGA, the dual spout is rinsed automatically. Precondition: ‘Please select product:’ is displayed. T Place a receptacle under the dual spout. Q T Press the On/Off button. ‘Machine is rinsing.’, ‘Milk system is being rinsed.’ (if you have prepared a speciality coffee with milk). The system rinses itself. The operation stops automatically. Your GIGA is switched off.
4 4 Permanent settings in programming mode Permanent settings in programming mode Possible settings in programming mode Press the P button to enter programming mode. You can navigate through the programme items and permanently save the required settings simply by turning the Rotary Switch and using the multifunction buttons.
4 Permanent settings in programming mode Product settings In the programme item ‘Product settings (2/5)’ you can make individual settings for all speciality coffees, milk and hot water.
4 Permanent settings in programming mode Example: Proceed as follows in the ‘Expert mode’ to change the amount of milk for a latte macchiato from ‘4 sec.’ to ‘6 sec.’, the amount of milk foam from ‘12 sec.’ to ‘14 sec.’ and the amount of water from ‘45 ml’ to ‘40 ml’. Precondition: ‘Please select product:’ is displayed. O T Press the P button. ‘Maintenance status (1/5)’ g T Turn the Rotary Switch until the programme item ‘Product settings (2/5)’ is displayed. T Press the ‘Expert mode’ button.
4 Permanent settings in programming mode Setting the consistency of grind In the programme item ‘Product settings (2/5)’ / ‘Set consistency of grind’ you can adjust both grinders separately to the degree of roast of your coffee. The consistency of grind setting is correct if the coffee flows regularly from the dual spout. In addition a fine, thick crema forms. Example: Proceed as follows to change the consistency of grind for the grinder on the right. Precondition: ‘Please select product:’ is displayed.
4 U U U U Permanent settings in programming mode ‘Rinse the milk system’ / ‘Manual after 10 min.’ U You are prompted to rinse the milk system 10 minutes after preparation of a speciality coffee with milk. ‘Rinse the milk system’ / ‘Manual immediate’ U You are prompted to rinse the milk system immediately after preparation of a speciality coffee with milk. ‘Rinse the milk system’ / ‘Automatic after 10 min.
4 Permanent settings in programming mode Setting the water hardness The harder the water is, the more frequently the GIGA needs to be descaled. It is therefore important to adjust the water hardness. The water hardness can be adjusted on a continuous scale between 1° dH and 30° dH. Precondition: ‘Please select product:’ is displayed. O T Press the P button. ‘Maintenance status (1/5)’ g T Turn the Rotary Switch until the programme item ‘Machine settings (3/5)’ is displayed.
4 Permanent settings in programming mode Example: Proceed as follows to change the energy-saving mode from ‘Save Level 1’ to ‘Save Level 2’. Precondition: ‘Please select product:’ is displayed. O T Press the P button. ‘Maintenance status (1/5)’ g T Turn the Rotary Switch until the programme item ‘Machine settings (3/5)’ is displayed. T Press the ‘Save energy’ button. ‘Save energy’ T Press the ‘Save Level 2’ button. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display.
4 Permanent settings in programming mode O Timer T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Time / date’ T Press the P button to exit programming mode. ‘Please select product:’ In the programme item ‘Machine settings (3/5)’ / ‘Timer’ you can set an individual switch-on and switch-off time for every day of the week. E Automatic switch-on only works when the machine is switched on at the power switch.
4 O Automatic switch-off Permanent settings in programming mode T Press the ‘Every weekday’ button. ‘Saved’ appears briefly on the display. The switch-on and switch-off times you just set are adopted for every day of the week. ‘Timer’ T Press the P button to exit programming mode. ‘Please select product:’ By instructing your GIGA to automatically switch itself off, you can cut down your energy consumption.
4 Permanent settings in programming mode Units In the programme item ‘Machine settings (3/5)’ / ‘Units’ you can make the following settings: Unit for amount of water: ‘ml’ or ‘oz’ Time format: ‘24 hrs.’ or ‘AM / PM’ U U Example: Proceed as follows to change the unit for the amount of water from ‘ml’ to ‘oz’. Precondition: ‘Please select product:’ is displayed. O T Press the P button. ‘Maintenance status (1/5)’ g T Turn the Rotary Switch until the programme item ‘Machine settings (3/5)’ is displayed.
4 Permanent settings in programming mode g T Turn the Rotary Switch until the programme item ‘Machine settings (3/5)’ is displayed. T Press the ‘Factory setting’ button. ‘Factory setting’ T Press the ‘All products’ button. ‘All products’ / ‘Reset all products to the factory settings?’ T Press the ‘Yes’ button. ‘Saved’ appears briefly on the display. ‘Factory setting’ O T Press the P button to exit programming mode.
4 Permanent settings in programming mode Display settings In the programme item ‘Machine settings (4/5)’ / ‘Display’ you can make the following settings: ‘Brightness’ (as percentages) ‘Contrast’ (high, normal, low) ‘Backlight’ (backlighting; as percentages) U U U Example: Proceed as follows to change the brightness of the display. Precondition: ‘Please select product:’ is displayed. O T Press the P button.
4 Querying information Permanent settings in programming mode In the programme item ‘Information (5/5)’ you can view the following information: ‘Product counter’: Number of prepared coffee speciality coffees, speciality coffees with milk and hot water ‘Maintenance counter’: Number of maintenance programmes performed (cleaning, descaling, changing the filter etc.) ‘Version’: Software version U U U Precondition: ‘Please select product:’ is displayed. O T Press the P button.
5 5 Maintenance Maintenance Your GIGA has the following integrated maintenance programmes: Rinsing the coffee system (‘Rinse the coffee system’) Rinsing the milk system in the dual spout (‘Rinse the milk system’) Cleaning the milk system in the dual spout (‘Clean the milk system’) Changing the filter (‘Change the filter’) Cleaning the machine (‘Clean’) Descaling the machine (‘Descale’) (only if filter is not activated) U U U U U U E Clean or descale the machine, rinse the milk system or change the filt
5 Rinsing the milk system Maintenance Depending on the setting in programming mode, the GIGA prompts you to rinse the milk system or automatically performs rinsing following milk preparation. Example: Proceed as follows to rinse the milk system when prompted to do so. Precondition: ‘Rinse the milk system.’ and the c symbol are displayed. T Place a receptacle under the dual spout. O T Press the P button. ‘Maintenance status (1/5)’ T Press the ‘Rinse the milk system’ button. ‘Milk system is being rinsed.
5 Maintenance T Place another receptacle under the dual spout. T Press the ‘Next’ button. ‘Milk system is being cleaned.’, water flows out of the dual spout. ‘Water for cleaning milk system.’ T Rinse the receptacle thoroughly, fill it with 250 ml of fresh water and immerse the milk pipe in the water. T Empty the other receptacle and place it under the dual spout again. T Press the ‘Next’ button. ‘Milk system is being cleaned.’, the dual spout and the pipe are rinsed with fresh water.
5 Maintenance T Carefully pull the bottom part of the milk system down and off. T Remove the milk system from the dual spout. T Remove the air intake pipe. T Dismantle the milk system into its individual parts. T Rinse all the parts under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in JURA Cappuccino Cleaner and then rinse them thoroughly. T Reassemble the milk system.
5 Maintenance T Fit the air intake pipe. T Fit the assembled individual parts back in the dual spout and press it firmly. T Attach the bottom part of the milk system to the part already inserted from below. T Fit the cover of the dual spout. It will click into place audibly. T Insert the milk pipe into the dual spout.
5 Inserting and activating the filter Maintenance Your GIGA no longer has to be descaled if you are using the CLARIS Blue filter cartridge. If the water hardness is 10° dH or more, we recommend using the filter cartridge. If you do not know the hardness of your water, you can find this out first (see Chapter 1 ‘Preparing and using for the first time – Determining the water hardness’). If you did not activate the filter cartridge the first time you used the machine, you can do this now as follows.
5 Maintenance T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Filter’ / ‘Filter rinsing complete.’ The machine heats up. ‘Please select product:’ appears on the display. Your GIGA is once more ready for use. Changing the filter E After 50 litres of water have flowed through or after two months, the filter will cease to work. Your GIGA will automatically prompt you to change the filter.
5 Cleaning the machine CAUTION Maintenance After 220 preparations or 80 switch-on rinses, the GIGA will prompt you to clean it. If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. E The cleaning programme lasts approximately 20 minutes. E Do not interrupt the cleaning programme. The quality of cleaning will be impaired if you do so. E JURA cleaning tablets are available from specialised dealers.
5 Maintenance T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Clean’ / ‘Cleaning complete.’ Cleaning is now complete. Your GIGA is once more ready for use. Descaling the machine The GIGA builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcification depends on the hardness of your water. J CAUTION If the descaling agent comes into contact with the skin or eyes, this can cause irritation.
5 Maintenance T Press the ‘Start’ button again. ‘Empty drip tray.’ T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Pour descaling agent into water tank.’ T Remove and empty the water tank. T Completely dissolve the contents of one blister (3 JURA descaling tablets) in a receptacle holding 600 ml of water. This may take several minutes. T Pour the solution into the empty water tank and insert it into the machine. ‘Press the Rotary Switch.
5 Maintenance T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Descale’ / ‘Descaling complete.’ Descaling is now complete. Your GIGA is once more ready for use. E If the descaling operation stops unexpectedly, rinse the water tank thoroughly. Cleaning the bean container Coffee beans may be covered with a slight oil film which remains on the walls of the bean containers. These traces may negatively affect the coffee result.
5 Descaling the water tank Maintenance Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time. T Remove the water tank. T If you use a CLARIS Blue filter cartridge, remove this. T Descale the tank with a mild conventional descaling agent in accordance with the manufacturer's instructions. T Rinse out the water tank thoroughly. T If you use a CLARIS Blue filter cartridge, insert this again.
6 Display messages 6 Display messages Message Cause/Result Action ‘Fill water tank.’ The water tank is empty. You cannot prepare any products. T Fill the water tank (see Chapter 1 ‘Preparing and using for the first time – Filling the water tank’). ‘Empty coffee grounds container.’ The coffee grounds container is full. You cannot prepare any products. T Empty the coffee grounds container and the drip tray (see Chapter 3 ‘Daily operation – Daily maintenance’). ‘Coffee grounds container not fitted.
6 Display messages Message Cause/Result Action ‘Change filter.’ After 50 litres of water have flowed through the CLARIS Blue filter cartridge or after two months, it will cease to work. T Replace the CLARIS Blue filter cartridge (see Chapter 5 ‘Maintenance – Changing the filter’). ‘Spout is not fitted.’ The cover of the dual spout is not fitted correctly. T Fit the cover of the dual spout correctly. ‘Not enough ground coffee.
7 Troubleshooting 7 Troubleshooting Problem Cause/Result Action Insufficient foam is produced when the milk is frothed, or milk sprays from the dual spout. The dual spout is dirty. T Rinse and clean the dual spout (see Chapter 5 ‘Maintenance – Cleaning the milk system’). Coffee only comes out in drips when it is being prepared. Coffee or ground coffee has been ground too finely and is blocking the system.
7 Problem Other ‘Error’ messages are displayed. Cause/Result Troubleshooting Action – T Switch the GIGA off at the power switch. Contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’). E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’).
8 8 Transport and environmentally friendly disposal Transport and environmentally friendly disposal Transport / Emptying the system In order to protect the GIGA from frost during transport, the system must be emptied. Precondition: ‘Please select product:’ is displayed. T Place one receptacle under the dual spout and another under the hot-water spout. O T Press the P button. ‘Maintenance status (1/5)’ g T Turn the Rotary Switch until the programme item ‘Machine settings (3/5)’ is displayed.
9 Technical data 9 Technical data Voltage 220–240 V ~, 50 Hz Power 2300 W Conformity mark AS Energy consumption ‘Save energy’ / ‘Save No’ Approx. 30 Wh Energy consumption ‘Save energy’ / ‘Save Level 1’ Approx. 12 Wh Energy consumption ‘Save energy’ / ‘Save Level 2’ Approx. 15 Wh Pump pressure Static, max. 15 bar Holding capacity of water tank 2.6 l Holding capacity of bean container 2× 280 g Holding capacity of coffee grounds container Max. 20 portions Cable length Approx. 1.
Index 10 A B C Index Addresses 59 Aroma preservation cover Bean container with aroma preservation cover 4 Automatic switch-off 30, 31 Automatic switch-on 30 Background 34 Bean container Bean container with aroma preservation cover 4 Cleaning 46 Filling 10 Status indicator 4 Bean container status indicator 4 Beans à la carte Activating the grinder selection 19 Bus bar Technical data 53 Button On/Off button 5 P button (programming) 5 Cappuccino 15 Cappuccino frother cleaning Cleaning the milk system 37 Ca
Index H I J L M Hotline 59 Hot water 20 Hot-water spout Height-adjustable hot-water spout 4 Instant coffee Ground coffee 17 Internet 9 JURA Contact details 59 Internet 9 Language 33 Latte macchiato 15 Locking device 5 Machine Cleaning 43 Descaling 44 Rinsing the coffee system 36 Setting up 9 Switching off 22 Switching on 21 Mains cable 4 Maintenance Daily maintenance 21 Maintenance 36 Maintenance settings 26 Messages, display 48 Milk Connecting milk 14 Milk system Cleaning 37 Rinsing 37 P Permanentl
Index Q R S Querying information 35 Quick installation 11 Quick mode 24 Rinsing the coffee system 36 Ristretto 15 Rotary Selection 15 Product selector 17 Rotary Switch 5 Safety 6 Safety information 6 Service cover 5 Service socket 5 Settings Maintenance settings 26 Permanent settings in programming mode 23 Setting up Setting up the machine 9 Short operating instructions 9 Sliding catch 5 Splash guard 4 Spout Height-adjustable hot-water spout 4 Height- and width-adjustable dual spout 4 Standard installat
11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233 @ You will find additional contact details for your country at www.jura.com. Directives The machine complies with the following directives: 2006/95/EC – Low Voltage Directive 2004/108/EC – Electromagnetic Compatibility 2009/125/EC – Ecodesign Directive U U U Technical changes We reserve the right to make technical changes.
11 JURA contact details / Legal information FIRST USE Art. 69878/GIGA5/en/201110 Checklist for first-use training 1. Preparation Checking the scope of supply Setting up and connecting the machine Filling with coffee beans 2. First-time use Selecting your language Setting the time and date Inserting and activating the CLARIS Blue filter cartridge Filling the system Determining and setting the water hardness 3.
