Operation Manual

1 Preparing and using for the first time

T Place a receptacle under the dual spout.

k T Press the Rotary Switch.

‘Machine is rinsing.’, the machine rinses. The operation

stops automatically.

‘Please select product:’ appears on the

display. Your GIGA is ready for use.

You can find out what the water hardness is by using the Aquadur®

test strip supplied as standard.

T Hold the test strip briefly (for 1 second) under flowing water.

Shake off the water.

T Wait for about 1 minute.

T You will then be able to read the degree of water hardness

from the discolouration of the Aquadur® test strip and the

description on the packaging.

Your GIGA creates fine, creamy, feather-light milk foam with a per-

fect consistency. The most important requirement for frothing milk

is a milk temperature of 4–8 °C. We would therefore recommend

using a milk cooler or a vacuum milk container.

T Connect the milk pipe to the dual spout. To do this, attach

the end of the milk pipe (without the connector) to the con-

nector on the right-hand side of the dual spout. Use the

short pipe for a milk container and the long pipe for a milk

carton.

T Connect the other end of the milk pipe to a milk container

or immerse it in a milk carton.

Determining the water

hardness

Connecting milk