Operation Manual

26
4 Permanent settings in programming mode
In the programme item ‘Product settings (2/5)’ / ‘Set consistency of
grind’
you can adjust both grinders separately to the degree of roast
of your coffee.
The consistency of grind setting is correct if the coffee flows regu-
larly from the dual spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind for
the grinder on the right.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the programme item ‘Product
settings (2/5)’
is displayed.
T Press the
‘Set consistency of grind’ button.
‘Set consistency of grind’
T Press the ‘Right grinder’ button.
‘Right grinder’
T Press the ‘+’ or ‘–’ button to change the setting for the con-
sistency of grind.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Set consistency of grind’
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Machine settings (3/5)’ / ‘Maintenance set-
tings’
you can make the following settings:
U
‘Filter’
U
Activate the CLARIS Blue filter cartridge (see Chapter 5
‘Maintenance – Inserting and activating the filter’).
U
‘Water hardness’
U
If you do not have a filter cartridge, you will need to set the
water hardness (see Chapter 4 ‘Permanent settings in pro-
gramming mode – Setting the water hardness’).
U
‘Switch-on rinse’ / ‘Manual’
U
The switch-on rinse must be started manually.
U
‘Switch-on rinse’ / ‘Automatic’
U
The switch-on rinse is started automatically.
Setting the consistency
of grind
Maintenance settings