Operation Manual

41
5 Maintenance
Your GIGA no longer has to be descaled if you are using the CLARIS
Blue filter cartridge. If the water hardness is 10° dH or more, we rec-
ommend using the filter cartridge. If you do not know the hardness
of your water, you can find this out first (see Chapter 1 ‘Preparing and
using for the first time – Determining the water hardness’).
If you did not activate the filter cartridge the first time you used the
machine, you can do this now as follows.
E Perform the ‘inserting the filter’ operation without any inter-
ruptions. This will ensure that your GIGA always produces its
best.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings (3/5)’
is displayed.
T Press the
‘Maintenance settings’ button.
T Press the
‘Filter’ button.
‘Filter’
T Press the ‘Active’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter.’ / ‘Press the Rotary Switch.’
T Remove the filter cartridge extension from the Welcome
Pack.
T Fit the filter extension on top of a CLARIS Blue filter cartridge.
T Remove and empty the water tank.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
k T Press the Rotary Switch.
‘Filter is being rinsed.’, the filter is rinsed. Rinsing of the filter
stops automatically.
‘Empty drip tray.’ appears on the dis-
play.
Inserting and activating
the filter