Operation Manual

1 Preparing and using for the first time

T Remove any dirt or foreign objects from inside the bean

container.

T Fill the bean container with coffee beans and close the

aroma preservation cover.

E Before the machine is used for the first time, the permanent

water connection must be installed by a JURA service techni-

cian.

During first-time use, you can choose between

‘Quick installation’

and

‘Expert mode’.

‘Quick installation’: After setting the time and date, your GIGA

is ready for use.

‘Expert mode’: Here, you can also choose whether you oper-

ate your GIGA with or without the CLARIS filter cartridge.

‘Use filter’/ ‘Active’: Here, you can set the capacity of the

external filter cartridge you are using.

‘Use filter’/ ‘Inactive’: Here, you can set the water hardness

of the water used. This setting influences when your GIGA

prompts you to perform descaling. If you do not know the

hardness of your water, you can find this out first (see Chap-

ter 1 ‘Preparing and using for the first time – Determining

the water hardness’).

If the machine is operated with a defective mains cable, there is a

danger of potentially fatal electric shock.

T Never use a machine which is damaged or has a defective

mains cable.

Precondition:The bean containers have been filled.

T Connect the mains cable to the machine.

T Insert the mains plug into a power socket.

 3 T Switch on the GIGA using the power switch on the back of

the machine.

 Q T Press the On/Off button to switch the GIGA on.

‘Welcome to JURA’ appears on the display. The display then

shows the languages you can choose from.

First-time use

WARNING