de en fr it nl es Instructions for use for IMPRESSA A9 One Touch pt The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.
Table of contents Your IMPRESSA A9 One Touch Control elements 36 Important information 38 Proper use ...............................................................................................................................................................38 For your safety .......................................................................................................................................................38 1 Preparing and using for the first time 40 JURA on the Internet ...........
de Table of contents 5 Maintenance 50 Rinsing the machine ............................................................................................................................................. 51 Rinsing the milk system ....................................................................................................................................... 51 Cleaning the milk system........................................................................................................................
Control elements Control elements 1 6 2 7 8 3 4 5 9 1 2 3 4 5 36 Water tank Mains cable (back of the machine) Milk pipe Coffee grounds container Drip tray 6 7 8 9 Bean container with aroma preservation cover Hot-water spout Height-adjustable dual spout Cup grille
de Control elements en fr 5 1 6 2 it 3 nl 7 4 es 1 Cover for powder chute for ground coffee 2 Powder chute for ground coffee (removable) 3 Touchscreen display 4 t Menu symbol 5 6 7 Cover cap for grinder adjustment switch Grinder adjustment switch Q On/Off button pt ru 37
Important information Important information U In the event of signs of damage, Proper use The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use. Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain.
de Important information There is a risk of scalds or burns on the spouts. U Place the machine out of the reach of children. U Do not touch any hot parts. Use the handles provided. A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire: U Never allow the mains cable to loosely hang down. The mains cable could pose a tripping hazard or become damaged.
1 Preparing and using for the first time People, including children, who 1 Preparing and using for the first time U do not have the physical, sensory or mental capabilities to use JURA on the Internet the machine safely or U are inexperienced or lack knowl- Visit us on the Internet. You can download short edge in how to use the machine operating instructions for your machine from the JURA website (www.jura.com).
de 1 Preparing and using for the first time Setting up the machine When setting up your IMPRESSA, please note the following: Place the IMPRESSA on a horizontal surface that is not sensitive to water. Choose a spot for your IMPRESSA which protects the machine against overheating. Ensure that the ventilation slots are not covered. U U the hardness of your water, you can find this out first (see Chapter 1 ‘Preparing and using for the first time – Determining the water hardness’).
1 Preparing and using for the first time T Open the filter holder and insert the filter cartridge into the water tank, exerting slight pressure. ‘Machine is heating’ ‘Machine is rinsing’, the machine rinses. The operation stops automatically. Your IMPRESSA is ready for use. E The display shows the products you can prepare. First-time use without filter cartridge activation T Close the filter holder. It will click into place audibly. E After two months, the filter will cease to work.
de 1 Preparing and using for the first time Determining the water hardness You can find out what the water hardness is by using the Aquadur® test strip supplied as standard. T Hold the test strip briefly (for 1 second) under flowing water. Shake off the water. T Wait for about one minute. T You will then be able to read the degree of water hardness from the discolouration of the Aquadur® test strip and the description on the packaging. T Connect the milk pipe to the dual spout.
2 Preparation the desired product is displayed. Then touch ‘Prepare’ to start preparation. The following additional products are shown in the product selector view: U ‘Ristretto’ U ‘2 ristretti’ U ‘2 espressi’ U ‘2 coffees’ U ‘Hot water’ U ‘Milk foam’ U ‘Latte Macchiato Doppio’ U ‘Cappuccino doppio’ 2 Preparation E You can stop preparation of a speciality coffee, speciality coffee with milk or hot water at any time. To do this, touch ‘Cancel’.
de 2 Preparation U Using the product selector view: U In the product selector view, move your finger from left to right (or vice versa) across the touchscreen display until the required double product ‘2 ristretti’, ‘2 espressi’ or ‘2 coffees’ is displayed. Then touch ‘Prepare’. Example: Proceed as follows to prepare two coffees (using product selector view). Precondition: The start screen is displayed. T Place two cups under the coffee spout. T Touch the ‘ ^ ’ box (bottom left).
2 Preparation T Touch the ‘Coffee’ box for about 2 seconds until ‘Enough coffee?’ appears. Preparation starts and the coffee flows into the cup. T Touch ‘Save’ as soon as there is sufficient coffee in the cup. Preparation stops. ‘Saved’ appears briefly on the display. The set amount of water for one coffee is permanently stored. Your IMPRESSA is once more ready for use. E You can alter this setting at any time by repeating the above procedure.
de 3 T Place a cup under the coffee spout. T Open the cover of the grinder adjustment switch. T Touch ‘Espresso’. The coffee strength is briefly displayed. The grinder starts up. T Turn the grinder adjustment switch to the desired position while the grinder is running. Daily operation T Touch ‘ ^ ’ (bottom left) to go to the product selector view. T Move your finger from left to right (or vice versa) across the touchscreen display until ‘Hot water’ is displayed. T Touch ‘Prepare’.
3 Daily operation Daily maintenance U To ensure that you get many years of reliable service out of your IMPRESSA and to guarantee the optimum coffee quality, the machine requires daily maintenance. T Pull out the drip tray. U 9 Clean the inside of the water tank, e.g. with a brush. Further information about the water tank is provided in these instructions for use (see Chapter 5 ‘Maintenance – Descaling the water tank’). Traces of milk and coffee may stick to the top and bottom of the cup grille.
de 4 4 Permanent settings in programming mode Touch the Menu symbol t for about 2 seconds to view the list of maintenance programmes and switch to programming mode. The following settings can be made: Deactivate start screen Water hardness Units Automatic switch-off Language U U U U U You can also add your four favourite products to the start screen (see next chapter).
5 Maintenance T Touch ‘Save’. ‘Saved’ appears briefly on the display. T Touch the Menu symbol t to exit programming mode. The start screen is displayed. T Touch the Menu symbol t to exit programming mode. The start screen is displayed. Automatic switch-off By instructing your IMPRESSA to automatically switch itself off, you can cut down your energy consumption. Your IMPRESSA switches off automatically after the preset time following the last action on the machine.
de 5 E Clean or descale the machine, rinse the milk system or change the filter when you are prompted to do so. E Touch the Menu symbol t for about 2 seconds to view the list of maintenance programmes. By referring to the bar you can see which maintenance programme is due. When the bar is completely filled with red, your IMPRESSA will prompt you to perform the appropriate maintenance programme. E In the interests of hygiene, you should clean the milk system daily when you have been preparing milk.
5 Maintenance T Touch ‘Start’ again. ‘Milk system cleaner’ T Pour 250 ml of fresh water into a receptacle and add one capful of milk system cleaner. T Immerse the milk pipe in the receptacle. T Place another receptacle under the dual spout. Dismantling and rinsing the dual spout The dual spout must be dismantled and rinsed daily if milk has been prepared to make sure it functions perfectly and also in the interests of hygiene. T Remove the milk pipe and rinse it thoroughly under running water.
de 5 T Dismantle the milk system into its individual parts. Maintenance T Fit the dual spout on the machine. It will click into place audibly. en 9 fr T Rinse all the parts under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in a solution of 250 ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly. T Fit the air intake pipe.
5 Maintenance T Open the filter holder and insert the filter cartridge into the water tank, exerting slight pressure. Changing the filter T Close the filter holder. It will click into place audibly. Precondition: The start screen is displayed. The box with the Maintenance symbol c lights up red. T Touch‘c’. T Touch ‘Change the filter’. ‘Change the filter’ E After two months, the filter will cease to work. Set the date on the date plate on the filter holder in the water tank.
de 5 T Fill the water tank with fresh, cold water and reinsert the tank. T Place a receptacle (at least 300 ml) under the hot-water spout. 9 T Touch ‘Next’. ‘Filter is being rinsed’, water flows out of the hot-water spout. E The water may be slightly discoloured. This is not harmful to health and does not affect the taste. Rinsing of the filter stops automatically after approximately 300 ml. ‘Machine is heating’ Your IMPRESSA is once more ready for use.
5 Maintenance Descaling the machine The IMPRESSA builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcification depends on the hardness of your water. J CAUTION If the descaling agent comes into contact with the skin or eyes, this can cause irritation. T Avoid contact with the skin or eyes. T Rinse off the descaling agent with clean water. Should you get any descaling agent in your eye, see a doctor.
de 5 T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Fill water tank’ T Place a receptacle under the dual spout and the hot-water spout. 9 T Remove the water tank and rinse it thoroughly. T Fill the water tank with fresh, cold water and reinsert the tank. ‘Press the menu button’ T Touch the Menu symbol t. ‘Machine is being descaled’, water flows out of the dual and hot-water spout. ‘Machine is rinsing’, water flows out of the dual spout.
6 Display messages 6 Display messages Message Cause/Result Action ‘Fill water tank’ The water tank is empty. You cannot prepare any products. T Fill the water tank (see Chapter 1 ‘Preparing and using for the first time – Filling the water tank’). ‘Empty grounds’ The coffee grounds container is full. You cannot prepare any products. T Empty the coffee grounds container and the drip tray (see Chapter 3 ‘Daily operation – Daily maintenance’). ‘Empty drip tray’ The drip tray is full.
de 7 7 Troubleshooting Troubleshooting Problem Cause/Result Action Insufficient foam is produced when the milk is frothed, or milk sprays from the dual spout. The dual spout is dirty. T Clean the milk system in the dual spout (see Chapter 5 ‘Maintenance – Cleaning the milk system’). T Dismantle and rinse the dual spout (see Chapter 5 ‘Maintenance – Dismantling and rinsing the dual spout’). Coffee only comes out in drips when it is being prepared.
8 8 Transport and environmentally friendly disposal Transport and environmentally 9 Technical data friendly disposal Transport / Emptying the system In order to protect the IMPRESSA from frost during transport, the system must be emptied. Precondition: The start screen is displayed. T Touch the ‘Rotary Selection’ box. The product selector view is launched. T Move your finger from left to right (or vice versa) across the touchscreen display until ‘Hot water’ is displayed. T Touch ‘Prepare’.
de 10 10 Index Index Display Touch display 37, 40 Display messages 58 Disposal 60 Double product 44 Drip tray 36 Dual spout Dismantling and cleaning 52 Height-adjustable dual spout 36 A Addresses 64 Aroma preservation cover Bean container with aroma preservation cover 36 Automatic switch-off 50 B Bean container Bean container with aroma preservation cover 36 Cleaning 57 Filling 41 Bus bar Technical data 60 Button On/Off button 37 C Cappuccino 45 Cappuccino doppio 45 Cappuccino frother cleaning Cleanin
10 Index Preparation options 44 Problems Troubleshooting 59 Product selector view 44 Programming mode 49 Automatic switch-off 50 Deactivating the start screen 49 Language 50 Replacing products on the start screen 49 Setting the water hardness 49 Unit for amount of water 50 Proper use 38 L Language 50 Latte macchiato 45 Latte macchiato doppio 45 M Machine Cleaning 55 Descaling 56 Regular maintenance 48 Rinsing 51 Setting up 41 Switching off 48 Switching on 47 Mains cable 36 Maintenance 50 Daily maintenan
de 10 Index W Water hardness Determining the water hardness 43 Setting the water hardness 49 Water tank 36 Descaling 57 Filling 43 Website 40 en fr it nl es pt ru 63
J71254/A9/en/201402 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233 @ You will find additional contact details for your country at www.jura.com.
