Operation Manual

12
1 Preparing and using for the first time
T Place a receptacle (at least 300 ml) under the fine foam
frother and the coffee spout.
 j T Turn the switch to them position.
FILTER RINSING, water flows out of the fine foam
frother.
E You can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
300ml.
SWITCH CLOSE appears on the display.
 h T Turn the switch to the °position.
The illuminated arrow on the switch goes out.
SYSTEM FILLING, the system fills up with water.
HEATING, the machine heats up.
RINSING, the system is rinsed. The rinse stops automat-
ically.
READY appears on the display. Your IMPRESSA is
ready for use.
 g T Turn the Rotary Switch until
FILTER- NO is displayed.
 k T Press the Rotary Switch.
OK appears briefly on the display.
16°dH
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
 g T Turn the Rotary Switch to change the water hardness set-
ting, e.g. to
25°dH.
 k T Press the Rotary Switch.
OK appears briefly on the display.
FILL WATER TANK
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
First-time use without filter
cartridge activation