IMPRESSA J9 One Touch Instructions for Use The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.
Table of contents Your IMPRESSA J9 One Touch IMPORTANT SAFEGUARDS 4 Control elements 8 Important information 10 Proper use .....................................................................................................................................................10 For your safety ..............................................................................................................................................10 1 Preparing and using for the first time 13 JURA on the Internet ..........
Table of contents 5 6 7 8 9 10 11 Maintenance 35 Rinsing the machine ................................................................................................................................... 35 Rinsing the cappuccino frother ................................................................................................................ 35 Cleaning the cappuccino frother ..............................................................................................................
Important Safeguards IMPORTANT SAFEGUARDS These safeguards apply for machines with UL safety test (see rating plate and chapter 9, ‘Technical data’). Follow the basic safety precautions When using electrical appliances, basic safety precautions should always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Z Read all instructions. Z Do not touch hot surfaces. Use handles or knobs.
Important Safeguards Special cord set instructions a. A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a long cord. Your IMPRESSA has a 3-pin grounded plug. b. Longer extension cords are available and may be used if care is exercised in their use. c. If an extension cord is used, 1. the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, and 2.
Important Safeguards Z Z NEVER DO (or you will void your warranty protection): Z Z Z Z 6 Keep your hands and the cord away from hot parts of the appliance during operation. Never clean with scouring powders or hard implements. Never fill instant coffee, chocolate mix etc. into the grinder or ground coffee funnel (grinder by-pass). It will damage the functioning of the brewing chamber. Never fill sugar coated coffee beans into the bean hopper. In case of doubt, call your dealer.
Important Safeguards 7
Control elements Control elements 9 10 11 1 2 3 12 4 13 14 5 15 6 7 8 Figure: IMPRESSA J9 One Touch Chrome 1 2 3 4 5 6 7 8 Bean container cover Water tank cover Bean container with aroma preservation cover Water tank Height- and width-adjustable coffee spout Coffee grounds container Drip tray Cup platform 9 10 11 12 13 14 15 8 Filler funnel for preground coffee Grinder adjustment switch Storage compartment cover Storage compartment with measuring spoon for preground coffee, hot-water nozzle an
Control elements 1 2 3 4 1 Q 2 g 3 c On/Off button Rotary Switch Maintenance button 4 u i o m z q p Display Ristretto button Espresso button Coffee button Hot Water button Milk button Latte Macchiato button Cappuccino button The Connector System© permits the use of different cappuccino frothers. These are available from stockists.
Important information Important information Proper use The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use. Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain.
Important information There is a risk of scalds or burns on the spouts and the cappuccino frother. Place the machine out of the reach of children. Do not touch any hot parts. Use the handles provided. Ensure that the cappuccino frother is correctly fitted and clean. If incorrectly fitted or if they become blocked, the cappuccino frother or its parts might come off. U U U A defective machine is not safe and could cause injury or fire.
Important information People, including children, who do not have the physical, sensory or mental capabilities to use the machine safely or are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly. U U Safety when handling the CLARIS Blue filter cartridge: Filter cartridges should be kept out of the reach of children. Store filter cartridges in a dry place in the sealed packaging.
1 1 Preparing and using for the first time Preparing and using for the first time JURA on the Internet Visit us on the Internet. @ You can download short operating instructions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your IMPRESSA and on every aspect of coffee. Setting up the machine When setting up your IMPRESSA, please note the following: Place the IMPRESSA on a horizontal surface that is not sensitive to water.
1 Preparing and using for the first time T Fill the bean container with coffee beans, then close the aroma preservation cover and the bean container cover. First-time use J WARNING If the machine is operated with a defective mains cable, there is a danger of potentially fatal electric shock. T Never use a machine which is damaged or has a defective mains cable. Precondition: The water tank and bean container are full. T Insert the mains plug into a power socket.
1 Inserting and activating the filter Preparing and using for the first time Your IMPRESSA no longer has to be descaled if you are using the CLARIS Blue filter cartridge. E Perform the ‘inserting the filter’ operation without any interruptions. This will ensure that your IMPRESSA always produces its best. Precondition: COFFEE READY is displayed. k T Press and hold the Rotary Switch until MAINTENANCE appears on the display. g T Turn the Rotary Switch until FILTER NO is displayed.
1 Preparing and using for the first time E You can interrupt rinsing of the filter at any time by pressing any button. Press the Maintenance button c to continue rinsing of the filter. E The water may be slightly discoloured. This is not harmful to health and does not affect the taste. Rinsing of the filter stops automatically after approximately 500 ml. The machine heats up. COFFEE READY appears on the display. The filter is activated.
1 Preparing and using for the first time k T Press the Rotary Switch to enter the programme item. 16°dH g T Turn the Rotary Switch until 25°dH is displayed. k T Press the Rotary Switch to confirm the setting. CONFIRMED appears briefly on the display. HARDNESS 25°dH g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode. COFFEE READY appears on the display.
2 Preparation 2 Preparation E You can stop preparation of a speciality coffee, milk speciality or hot water at any time. Just press any button. E Before and during the grinding operation you can select the coffee strength of individual products: extra-mild (ö), mild (öö), normal (ööö), strong (öööö) or extra-strong (ööööö). E During preparation, you can change the preset amount of water by turning the Rotary Switch. E You can follow the current status of preparation on the progress bar.
2 Preparation Latte macchiato, cappuccino Your IMPRESSA can prepare a latte macchiato or cappuccino at the touch of a button. There is no need to move the glass or cup. Example: Proceed as follows to prepare one latte macchiato. E Use the short spout for a latte macchiato glass and the long spout for a cappuccino cup. T Attach the milk pipe to the cappuccino frother. Use the long pipe for a milk carton and the short pipe for a milk container.
2 Preparation Hot milk and milk foam E This chapter applies to the Professional and Easy Cappuccino Frothers. Example: Proceed as follows to prepare milk foam. T Attach the milk pipe to the cappuccino frother. Use the long pipe for a milk carton and the short pipe for a milk container. T Insert the other end of the milk pipe into a milk carton or connect it to a milk container. T Place a cup under the cappuccino frother.
2 Preparation E The desired speciality coffee must be prepared within approximately one minute after filling with the preground coffee. Otherwise the IMPRESSA stops the operation and is once more ready for use. All speciality coffees with preground coffee are prepared following this model. Example: Proceed as follows to prepare an espresso using preground coffee. T Place an espresso cup under the coffee spout. T Open the cover of the filler funnel for preground coffee.
2 Preparation Example: Proceed as follows to permanently set the amount of water for one coffee. Precondition: COFFEE READY is displayed. T Place a cup under the coffee spout. o T Press and hold the Coffee button. 1 COFFEE and the coffee strength is displayed. T Hold the Coffee button down until ENOUGH COFFEE? appears. T Release the Coffee button. Preparation starts and the coffee flows into the cup. T Press any button as soon as there is sufficient coffee in the cup. Preparation stops.
2 Preparation T Place a cup under the hot-water nozzle. T Press the Hot Water button. The temperature is displayed. E By touching the Hot Water button several times (within approximately 2 seconds) you can set the temperature to your individual preference. This setting is not saved. WATER, hot water flows into the cup. Preparation stops automatically and COFFEE READY appears on the display.
3 3 Daily operation Daily operation Switching on When the IMPRESSA is switched on, it automatically prompts you to perform the rinse operation. Start the rinse operation by pressing the Maintenance button c. In programming mode you can change this setting so that the machine starts the switch-on rinse automatically (see Chapter 4 ‘Permanent settings in programming mode – Rinses’). Precondition: Your IMPRESSA is switched on at the power switch. T Place a receptacle under the coffee spout.
3 Switching off Daily operation When you switch your IMPRESSA off, the spouts used to prepare a speciality coffee are rinsed. T Place a receptacle under the coffee spout and another under the cappuccino frother. T Press the On/Off button. MACHINE RINSING, the spouts used to prepare a speciality coffee or milk are rinsed. The operation stops automatically and your IMPRESSA is switched off. E When the IMPRESSA is switched off with the On/Off button, the machine consumes less than 0.1 W of standby energy.
4 Permanent settings in programming mode 4 Permanent settings in programming mode You can make permanent settings in programming mode. You can navigate through the programme items and permanently save the required settings simply by turning and pressing the Rotary Switch.
4 Programme item Permanent settings in programming mode Sub-item Explanation T Keep track of all prepared speciality coffees and milk specialities and view the maintenance status. INFORMATION SETTINGS ML, OZ T Select the unit for the amount of water. SYMBOL BRIGHTNESS BRIGHTNESS T Adjust the brightness of the symbols. LANGUAGE T Select your language. EXIT T Exit programming mode.
4 Permanent settings in programming mode Permanent settings in programming mode always follow the same model. Example: Proceed as follows to change the amount of milk for a latte macchiato from 16 SEC to 20 SEC, the amount of water from 45 ML to 40 ML and the interval from 30 SEC to 20 SEC. Precondition: COFFEE READY is displayed. k T Press and hold the Rotary Switch until MAINTENANCE appears. g T Turn the Rotary Switch until PRODUCTS is displayed. k T Press the Rotary Switch to enter the programme item.
4 Permanent settings in programming mode k T Press the Rotary Switch to confirm the setting. CONFIRMED appears briefly on the display. PAUSE 20 SEC g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit the programme item. SELECT PRODUCT g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit the programme item. PRODUCTS g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit the programme item.
4 Permanent settings in programming mode k T Press the Rotary Switch to confirm the setting. CONFIRMED appears briefly on the display. ECONOMY MODE g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode. COFFEE READY Automatic switch-off By instructing your IMPRESSA to automatically switch itself off, you can cut down your energy consumption.
4 U Permanent settings in programming mode CAPP RINSE AFTER 10' U You are prompted to perform a cappuccino rinse 10 minutes after preparation of a milk product. U CAPP RINSE NOW U You are prompted to perform a cappuccino rinse immediately after preparation of a milk product. Example: Proceed as follows to make the machine prompt you to perform the cappuccino rinse immediately after preparing a milk product. Precondition: COFFEE READY is displayed.
4 Permanent settings in programming mode U ALL PRODUCTS U The settings (amount of water, aroma, temperature etc.) for all products are reset to the factory settings. U RESET ALL U All customer settings are reset to the factory settings. Your IMPRESSA then switches off. Example: Proceed as follows to reset the values for ‘Espresso’ to the factory settings. Precondition: COFFEE READY is displayed. k T Press and hold the Rotary Switch until MAINTENANCE appears.
4 Permanent settings in programming mode Precondition: COFFEE READY is displayed. k T Press and hold the Rotary Switch until MAINTENANCE appears. g T Turn the Rotary Switch until INFORMATION is displayed. k T Press the Rotary Switch to enter the programme item. TOTAL, the total number of prepared speciality coffees and milk specialities is displayed. g T Turn the Rotary Switch to view additional information.
4 Permanent settings in programming mode Brightness of symbols You can individually adjust the brightness of the symbols. Precondition: COFFEE READY is displayed. k T Press and hold the Rotary Switch until MAINTENANCE appears. g T Turn the Rotary Switch until SYMBOL BRIGHTNESS is displayed. k T Press the Rotary Switch to enter the programme item. BRIGHTNESS g T Turn the Rotary Switch to set the required brightness of the symbols. k T Press the Rotary Switch to confirm the setting.
5 5 Maintenance Maintenance Your IMPRESSA has the following integrated maintenance programmes: Cleaning the cappuccino frother Rinsing the cappuccino frother Changing the filter Cleaning the machine Rinsing the machine Descaling the machine U U U U U U E Clean or descale the machine or change the filter when the display prompts you to do so. Rinsing the machine You can initiate the rinse operation manually at any time. Precondition: COFFEE READY is displayed.
5 Maintenance c Cleaning the cappuccino frother T Place a receptacle under the cappuccino frother. T Press the Maintenance button. CAPPU. RINSING, the cappuccino frother is rinsed. The operation stops automatically and COFFEE READY appears on the display. E This chapter applies to the Professional and Easy Cappuccino Frothers. To ensure that the cappuccino frother always works properly, you should clean it daily when you have been preparing milk.
5 c Maintenance T Place another receptacle under the cappuccino frother. T Press the Maintenance button. CAPPUCCINO CLEANS, the cappuccino frother and the pipe are cleaned. WATER FOR CAPPUCCINO c Dismantling and rinsing the Professional Cappuccino Frother T Rinse the receptacle thoroughly, fill it with 250 ml of fresh water and immerse the milk pipe in the water. T Empty the other receptacle and place it under the cappuccino frother again. T Press the Maintenance button.
5 Maintenance Changing the filter E After 50 litres of water have flowed through, the filter will cease to work. Your IMPRESSA will automatically prompt you to change the filter. E After two months, the filter will cease to work. You can check the elapsed time by referring to the date plate on the filter holder in the water tank. E If the CLARIS Blue filter cartridge is not activated in programming mode, you will not be prompted to change the filter.
5 Maintenance E You can interrupt rinsing of the filter at any time by pressing any button. Press the Maintenance button c to continue rinsing of the filter. E The water may be slightly discoloured. This is not harmful to health and does not affect the taste. Rinsing of the filter stops automatically after approximately 500 ml. The IMPRESSA heats up and is once more ready for use. Cleaning the machine CAUTION After 200 preparations or 80 switch-on rinses, the IMPRESSA will prompt you to clean it.
5 Maintenance c c Descaling the machine 40 T Place a receptacle under the coffee spout and another under the cappuccino frother. T Press the Maintenance button. CLEANS, water flows out of the coffee spout. The operation is interrupted, ADD TABLET. T Open the cover of the filler funnel for preground coffee. T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. ADD TABLET / PRESS RINSE, the Maintenance button c lights up. T Press the Maintenance button.
5 CAUTION Maintenance If the descaling agent comes into contact with sensitive surfaces (e.g. marble), damage cannot be ruled out. T Clean up any splashes immediately. E The descaling programme lasts approximately 45 minutes. E JURA descaling tablets are available from stockists. E If you use a CLARIS Blue filter cartridge and this is activated, you will not be prompted to descale. Precondition: COFFEE READY / DECALCIFY MACHINE is displayed and the Maintenance button c lights up.
5 Maintenance c T Place a receptacle (at least 500 ml) under the Connector System©. T Press the Maintenance button. DECALCS c This causes water to flow out of the Connector System© several times. The Maintenance button c flashes during the descaling operation. The operation stops automatically, EMPTY TRAY. T Empty the receptacle under the Connector System©. T Empty the drip tray and coffee grounds container and put them back into the machine.
5 Cleaning the bean container Maintenance Coffee beans may be covered with a slight oil film which remains on the walls of the bean container. These traces may negatively affect the coffee result. For this reason clean the bean container from time to time. Precondition: COFFEE READY / FILL BEANS is displayed. Q T Switch the machine off with the On/Off button. 3 T Switch the machine off at the power switch. T Open the bean container cover and remove the aroma preservation cover.
6 Display messages 6 Display messages Message Cause/Result Action FILL WATER TANK The water tank is empty. You cannot prepare any products. T Fill the water tank (see Chapter 1 ‘Preparing and using for the first time – Filling the water tank’). EMPTY GROUNDS The coffee grounds container is full. You cannot prepare any coffee products, but you can prepare hot water and milk. T Empty the coffee grounds container and the drip tray (see Chapter 3 ‘Daily operation – Daily maintenance’).
6 Display messages Message Cause/Result Action COFFEE READY / DECALCIFY MACHINE or COFFEE READY / DECALCIFY NOW COFFEE READY / CHANGE FILTER or COFFEE READY / CHANGE NOW The IMPRESSA is prompting you to descale it. T Perform descaling (see Chapter 5 ‘Maintenance – Descaling the machine ’). The filter cartridge no longer works. T Replace the CLARIS Blue filter cartridge (see Chapter 5 ‘Maintenance – Changing the filter’).
7 Troubleshooting 7 Troubleshooting Problem Cause/Result Action Insufficient foam is produced when the milk is frothed or milk sprays from the cappuccino frother. The cappuccino frother is dirty. T Rinse and clean the cappuccino frother (see Chapter 5 ‘Maintenance – Rinsing the cappuccino frother’). Coffee only comes out in drips when it is being prepared. Coffee or preground coffee has been ground too finely and is blocking the system.
7 Problem Other ERROR messages are displayed. Cause/Result Troubleshooting Action – T Switch the IMPRESSA off at the power switch. Contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’). E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’).
8 8 Transport and environmentally friendly disposal Transport and environmentally friendly disposal Transport / Emptying the system In order to protect the IMPRESSA from frost during transport, the system must be emptied. Precondition: COFFEE READY is displayed. T Carefully pull the cappuccino frother off the Connector System©. T Place a receptacle under the Connector System©. z T Press the Milk button. HEATING UP As soon as the machine has heated up, COFFEE READY appears.
9 Technical data 9 Technical data Voltage AS F D G Power 1450 W Safety test SFDG Energy consumption Approx. 5 Wh 220–240 V ~, 50 Hz 120 V ~, 60 Hz 220–240 V ~, 50 Hz 220 V ~, 50 Hz SAVE YES Energy consumption Approx. 12 Wh SAVE NO Pump pressure Static, max. 15 bar Holding capacity of water tank 2.1 l Holding capacity of bean container 250 g Holding capacity of coffee grounds container Max. 16 portions Cable length Approx. 1.1 m Weight 10.75 kg Dimensions (W H D) 28.5 34.
Index 10 A B C Index Contact details 52 Cup platform 8 Customer support 52 Addresses 52 Automatic switch-off 30 Bean container 8 Bean container with aroma preservation cover 8 Cleaning 43 Filling 13 Bus bar Technical data 49 Button Cappuccino button 9 Coffee button 9 Espresso button 9 Hot Water button 9 Latte Macchiato button 9 Maintenance button 9 Milk button 9 On/Off button 9 Ristretto button 9 D E F Cappuccino 19 Cappuccino frother Cleaning 36 Professional Cappuccino Frother 8 Rinsing 35 CLARIS Bl
Index J L M P Language 34 Products 27 Restore factory settings 31 Rinses 30 Unit for amount of water 33 Proper use 10 JURA Contact details 52 Internet 13 Language 34 Latte macchiato 19 Machine Cleaning 39 Descaling 40 Rinsing 35 Setting up 13 Switching off 25 Switching on 24 Mains cable 8 Maintenance Daily maintenance 24 Maintenance 35 Milk Hot 20 Milk foam 20 Permanently setting the water for the cup size 21 Permanent settings in programming mode 26 Power switch 8 Preground coffee 20 Preparation 18, 1
Art. 68824/J9/en/201104 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 62 38 98 233 @ You will find additional contact details for your country at www.jura.com.
