Operation Manual

22
20. Problems
Problem Cause Action
Coffee only flows in dribs – Powder too fine – Adjust grinder to a coarser grinding
and drabs while drawing off
– Run one or two rinse programs
– If result is no better, clean the machine
– as per instruction
Coffee flow is stopped – Not enough coffee powder in the system – Draw off one cup of coffee
after pre-brewing
Grinder is extremely noisy – Foreign element in grinder – Proceed as described in chapter 14.5
Not enough froth while – Frothing nozzle blocked – Clean frothing nozzle
frothing up milk – Frothing nozzle in wrong position – Draw off steam
If the above mentioned problems and/or messages still persist, please contact your dealer or get in touch directly
with JURA Elektroapparate AG.