IMPRESSA M30 IMPRESSA Scala IMPRESSA Scala Vario IMPRESSA X30 Art. Nr.
Jura Impressa M30 English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Legend : = Note = Important = Tip 6 – 17 Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.juraworld.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig.
Operating elements Jura Impressa M30 11 12 13 10 9 8 7 6 5 4 3 2 1 14 15 16 17 18 19 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19.
Contents Jura Impressa M30 1. Description ..................................................page 6 10. Switching off machine...................................page 11 1.1 Meaning of symbols in the display.............page 6 11. Care and maintenance ...................................page 11 2. Safety instructions........................................page 6 11.1 Fill water............................................page 11 2.1 Warnings ..............................................page 6 11.
Important information for the user Thank you for choosing this Jura product. Please study these instructions carefully before using your new machine and keep them in a safe place for easy reference in the future. Should you require further information or should particular problems occur that are not dealt with in these operating instructions in sufficient detail for you, then please ask you local dealer for the information you require or contact us directly. 1.1 Meaning of symbols in the display 1. 2. 3.
Never use a faulty machine or one with a damaged power cable. Never immerse the machine in water. 3.2 Checking fuse The machine is designed for a current of 10 amps. Check that an appropriate fuse is fitted. 2.2 Safety precautions Never expose the machine to the effects of rain, snow or frost and never operate it with wet hands. Place your espresso/coffee machine on a solid level surface. Never leave it on a surface that is warm or hot (hob etc.).
3.6 Adjusting grinder You can adjust the grinder to the roast of your coffee. We recommend the following: for a light roast a finer adjustment for a dark roast a coarser adjustment Open the cover of the bean container (11). To adjust grinding turn selector switch (Fig. 1) to the desired position. You have the following possibilities: the smaller the dots, the finer the grinding the bigger the dots, the coarser the grinding Level 1 The warning lamp flashes. The warning lamp lights up.
Now select the corresponding level with the selector switch and press the switch to store the setting. The warning lamps go off. It is only necessary to adjust the water hardness before the machine is used for the first time or when a different quality of water is used. If no water hardness level is changed within 60 seconds, the display goes out and the last value programmed remains unchanged. 3.
You can also change the water volume while coffee is being drawn off. Simply turn the selector switch for steam/hot water (3) to give more or less water. If you press draw-of buttonthe machine automatically doubles the amount of water and divides it between two cups. 7. Drawing off espresso/normal coffee Switch on the machine by pressing button. The machine is ready as soon as the warning lamp lights up. Place 1 or 2 cups under the coffee-spout (16) and press the appropriate button.
8.1 Resetting to stand-by status 11.2 Empty grounds container Please the selector switch (14) once more. The small light in the selector switch (14) goes off. The machine now goes into stand-by. This process is automatic and takes a few seconds. The coffee grounds are collected in the grounds container. When the warning lamp lights up, the draw-off buttons are blocked and you must empty the grounds container. Remove the drip tray (1). Be careful, as there is water in it.
11.5 Clean machine After 250 draw-offs or 180 rinse programme, the machine must be cleaned. The warning will remind you. You can still draw off coffee and hot water/steam. However, we recommend that you clean the machine (point 12) within the next few days. The warning lamp then goes off after the complete cleaning process has been carried out. 11.6 Machine furred After warming milk, draw off a little hot-water to clean the pivoting nozzle inside.
12. Cleaning The machine has an integrated cleaning programme. It takes about 15 minutes. Whenever the machine needs cleaning, warning lamp lights up. You can still draw off coffee and hot water/steam and run the cleaning programme later. Only use Jura cleaning tablets. They are available from your Jura dealer. Once the cleaning process has started, it must not be interrupted. Switch the machine on with the switch. Press the rinsing button for about 3 seconds. The warning lamps , , light up.
Press the rinsing button for about 3 seconds. The warning lamps , , light up. Completely dissolve the contents of one blister (2 tablets) in 0.5 litres of water in a container and pour the mixture into the water tank. Empty the drip tray and put it back in again. The warning lamp goes off. Press the rinsing button. The flashing of the warning lamps reminds you that the de-scaling process is activated. The de-scaling solution is guided into the drip tray in the inside of the machine.
16.
17. Problems Problem Cause Action Coffee flow is stopped after pre-brewing – Beans container is empty – Not enough coffee powder – Fill in beans – Measure powder correctly Grinder is extremely noisy – Alien element in grinder – Remove alien elements (Section 11.
18. Legal information 19. Technical data These operating instructions contain all the information necessary for the correct use, operation and maintenance of your espresso/ coffee machine. Impressa M30 / Scala / Scala Vario Understanding and complying with the directions contained in these operating instructions are essential to ensure that the machine is utilised without risk and to ensure safety during operation and maintenance.