IMPRESSA X9 Instructions for use
Legend: DISPLAY DISPLAY: serves as information. Continuous text. GRAPHICS DISPLAY: please follow the instructions shown. = Note = Important JURA Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.jura.
Fig. 2 Fig. 1 Fig. 3 Fig. 4 A Fig. 5 A Fig. 9 Fig. 6 Fig. 7 Fig. 8 Fig. 10 Fig. 11 Fig. 12 B B 왘 왘 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig.
N O P Q M L K J I H R G U S T F E V D W C B A X
Operating elements Impressa X9 A B C D E F G H I J K L M N O P Q R S T U V W X Drip tray Drip grate Grounds bin Height-adjustable dual spout Frothing key Macchiato key Milk Coffee key 2x key Ristretto key Espresso key Coffee key Cappuccino key Display dialog system (incl.
Contents 1. Description of the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7 1.1 Standard functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important Information for the user Thank you for choosing this JURA product. Please study these operating instructions carefully before using your new machine and keep them in a safe place for easy reference in the future. Should you require further information or should particular problems occur that are not dealt with in sufficient detail for you in these operating instructions, please ask your local dealer for the information you require or get in touch with us directly. 2. Safety information 2.
Please only use fresh, cold water. Never fill up with milk, mineral water and other fluids. You can also top up water without removing the tank. Simply remove the cover and pour in the water from above with a vessel and replace the lid again. MACHINE HEATING UP 䡲 Place a cup under the height-adjustable dual spout (Fig. 6). PRESS RINSE 3.4 Adding coffee beans You have the possilility of using two different types of coffee beans. 䡲 Press the Rinse key (Fig. 5/G).
8. Adjusting your machine to the water hardness Water is heated in the machine. This leads to scale as a result of use, which is automatically shown on the display. The machine must be adjusted to match the hardness of the water used. For this, please use the enclosed test stick. 1° German hardness is equivalent to 1.79° French hardness. The machine can be adjusted from 1° German hardness up to 30° German hardness. The function can also be deactivated. The IMPRESSA X9 is preset to 16° German hardness.
Press any of the product keys to stop the frothing and the brewing process prematurely. The milk system is rinsed automatically 10 minutes after dispensing milk. You will hear an acoustic signal before the rinsing cycle starts. There might be some initial splashing when drawing off hot water. The pivoting hot water spout becomes hot. Avoid direct contact with the skin! 12. Drawing off steam COFFEE READY 10.4 Frothing milk COFFEE READY 䡲 Place a cup under the height-adjustable dual spout (Fig.
14. Programming 䡲 Press the ‘+’ or ‘–’ key to define the amount of frothed milk. The following parameters can be programmed: 䡲 Press P to confirm your setting (Fig. 5/E). 쐌 쐌 쐌 쐌 쐌 쐌 쐌 쐌 Water hardness Setup (product) Time Switch-on time Switch-off time Language Display (unit and time format) Information (number of products made, number of cleaning cycles run) 14.1 Adjusting the machine to the water hardness For this, please refer to Chapter 8 ‘Adjusting your machine to the water hardness’. 14.
䡲 Press P to confirm your setting (Fig. 5/E). CONFIRMED WEEKDAY MONDAY 䡲 Press ‘+’ or ‘–’ (Fig. 5/F or L) to set the weekday. WEEKDAY TUESDAY 䡲 To save, press P (Fig. 5/E). TIME 14:45 䡲 Press the ‘+’ or ‘–’ key to select the next program step or press EXIT (Fig. 5/K) to leave programming mode. If —:— appears on the display, the switch-on function is deactivated. 14.5 Automatic switch-off time Choose a time between 0.5 and 9.0 hours or —.— (inactive). COFFEE READY 䡲 Hold the P button (Fig.
䡲 To confirm the setting, press the P button. CONFIRMED MACHINE ON MON NO 䡲 To select the next day of the week, press the ‘+’ or ‘–’ button. 䡲 To return to the main program, press the EXIT button (Fig. 5/K), or to leave programming press the EXIT button twice. 14.7 Automatic switch-off with non-use You have the option of programming an automatic switch-off, so that if the machine has not been used for a certain time it automatically switches itself off. COFFEE READY 䡲 Press P (Fig.
䡲 Press the ‘+’ or ‘–’ key to select the next program step or press EXIT (Fig. 5/K) to leave programming mode. 䡲 Press EXIT (Fig. 5/K) again to leave programming mode. 14.9 Setting up the display 14.9.1 Unit of measurement (ml/oz) This setting allows you to select a unit of measurement (ml or oz). COFFEE READY 䡲 Press P (Fig. 5/E) until you hear an acoustic signal. HARDNESS 䡲 Press the ‘+’ or ‘–’ key until DISPLAY appears on the display. SETTINGS 䡲 Press P again (Fig.
RINSING AUTOMATIC 䡲 To exit Programming mode, press the EXIT button (Fig. 5/K). 14.11 Information With the IMPRESSA X9 you can check each coffee you made. You can also check the number of cleaning cycles, decalcifying cycles and Claris filter replacements you performed. 14.11.1 Information draw-off COFFEE READY 䡲 Press P (Fig. 5/E) until you hear an acoustic signal. HARDNESS 䡲 Press the ‘+’ or ‘–’ key until INFORMATION appears on the display. INFORMATION COFFEE READY 䡲 Press Counter (Fig.
.5 Grounds bin missing GROUNDS BIN MISSING 䡲 Take off the spouts (Fig. 13). 䡲 Take the spouts apart (Fig. 14). 䡲 Thoroughly rinse all the parts with warm water. 䡲 If this message lights up, the grounds bin is not installed properly or missing altogether. 䡲 Reassemble the parts (Fig. 14). 16.6 Filling the bean tank 䡲 Attach the spouts to the IMPRESSA X9 (Fig. 13). COFFEE READY FILL BEANS The display dialog system indicates which of the two bean tanks is empty.
COFFEE READY Always dip both milk hoses into the fluid (Fig. 8/B). 16.11 Cleaning the coffee system Once started, the cleaning process must not be interrupted. It takes approx. 15 minutes. E 䡲 Remove the tray and the grounds bin and EMPTY the coffee grounds. COFFEE BIN MISSING 䡲 Place the grounds bin and the tray back into the machine. COFFEE READY CLEAN COFFEE READY After having dispensed 220 products or after 80 rinsing cycles, the machine must be cleaned.
CLEANER FOR CAPPUCCINO PRESS KEY 䡲 Place a sufficiently large receptacle under the height-adjustable dual spout (Fig. 6). 䡲 Fill a receptacle with approx. 4 dl of water and add 1 1/2 capfuls of JURA cappuccino cleaning agent. Dip the two milk hoses into the solution (Fig. 8/B). 䡲 Press the Clean Dual Spout key (Fig. 5/J). MACHINE CLEANING 䡲 You will hear an acoustic signal. ADD TABLET PRESS KEY 䡲 Drop an original JURA cleaning tablet into the filler funnel (Fig. 16). 䡲 Press the Clean Dual Spout key (Fig.
When using acidic decalcifying agents, immediately remove any splashes or drops from sensitive surfaces, in particular surfaces made of natural stone or wood, or take appropriate preventive measures. COFFEE READY DESCALE MACHINE DECALCIFYING CAPPUCCINO RINSING E 䡲 You will hear an acoustic signal. We recommend that you decalcify the machine within the same day. If you make more coffees, the display will indicate DECALCIFY. After yet even more coffees made, the display will read DECALCIFY NOW.
18. Messages Display Cause Remedy The tank is empty. Fill up with water. The water level gauge in the tank is jammed. Empty tank, rinse, fill water and put it back. The tank is calcified; the water level gauge is clogged. Take out tank, decalcify, rinse well, fill with water and put it back. The bean tank is empty. Refill bean tank. Message still lights up despite beans having been refilled. Make a cup of coffee. Stone jammed in the system. Remove stone as described in Chapter 16.
19. Disposal Please dispose of old machines in an environmentally compatible way Old machines contain valuable materials capable of being recycled which should be salvaged for recycling. Please therefore dispose of old machines via suitable collection systems. 21. Technical data Version ‘CH’ Voltage: 230 V AC Output: 1500 W Intensity of current: 10 A E Safety check: Pump pressure: 2 x max. 15 bar Water tank: 5.0 liters 20.
Art. 66394 – 8/07 JURA Elektroapparate AG – Kaffeeweltstrasse 10 – CH-4626 Niederbuchsiten www.jura.
