Operation Manual

-15 -
ASSEMBLY INSTRUCTIONS
Operation Instructions of Controller
1.Specifications:
Working temperature:-20-60ć Supply voltage:DC12V
Product size:L62×W35×H23mm Package size:L105×W65×H55mm
Net weight:50g Gross weight:70g Output:Three CMOS drain-open output
Connecting Mode:Common anode Max Ioad current:2 A each color
2.Control Method:
Adopt IR remoter to control the led controller,which has 24 buttons,the function of each
button as the table below:
Brightness+(Speed up)
3.Panel specification and connecting drawing as follows:
DC12V
POWER
SIGNAL
IR Sensor
OUTPUT
4.Warning:
Supply voltage of this product is DC12V never connect to DC24V or AC220V.
Never connect two wires directly in case of short circuit.
Lead wire should be connected correctly according to colors that connecting diagram offers.
Warranty of this product is one year,in this period we guarantee replacement or repairing with
no charge,but exclude the artificial situation of damaged or overioad working.
Static red Static green Static blue
Static white
Static orange Static pea green
Static dark blue 7color jumpy change
Static dark yellow
Static cyan Static brown
All fade out&fade in
Static yellow
Static light blue
Static pink
7color fade change
Static straw yellow Static sky blue
Static puple 3 base color jumpy
Brightness-(Speed down)
Off On
OFF
R
G
B
W
FLASH
STORBE
FADE
SMOOTH
ON
5. Replace the remote control battery:
The remote control for LED light is powered by a Model CR2025 3V battery. if you can't use it to
control the LED light at closer position, its battery may be exhausted. please push and pull out the
battery bracket to replace the battery. Like the instruction at the back of the remote control.
open
push