JC-M102U/ M104U 2/4-Port USB KVM Switch USER MANUAL
T ABLE OF CONTENTS INTRODUCTION-------------------------------------------------1 PRODUCT FEATURES -------------------------------- 1 SPECIFICATIONS --------------------------------------- 2 PACKAGE CONTENTS--------------------------------- 2 FLASH UPGRADE -----------------------------------3 FRONT AND BACK VIEWS -------------------------4 HARDWARE INSTALLATION ------------------------- 5 OPERATION----------------------------------------------------10 TROUBLESHOOTING---------------------------------------
JC-M102U/M104U Introduction The all-in-one JC-M102U/M104U KVM allows users to access and control two USB enabled computer from a single console (USB keyboard, monitor, and USB mouse). The JC-M102U/M104U is a truly USB switch using USB Hub device technology to provide the user with high performance USB support. It also supports speakers and microphone, perfect for any multimedia application.
JC-M102U/M104U Specifications Computer Device USB Connector 2 sets USB Hub A Type (Keyboard, VGA, Mouse) Female Audio Microphone Console Connections Keyboard Mouse Monitor Audio Microphone Hot Key Display Data Channel Resolution Operating Temp Storage Temp Humidity Power Supply 2/ 4 sets; All in one HDDB 15 pin 2/ 4 sets; Input (3.5 mm jack) 2/ 4 sets; Input (3.5 mm jack) 1 set; USB A type 1 set; USB A type 1 set; HDDB 15 pin Female 1 set; Output (3.5mm jack) 1 set; Output (3.
JC-M102U/M104U Flash Upgrade Flash upgradeable firmware allows you to obtain the latest firmware upgrades for your JC-M102U/ M104U. This enables your JC-M102U/ M104U to maintain consistent compatibility with the latest devices and computers. Firmware upgrades are free for the life of your JC-M102U/ M104U (Flash cable not included).
JC-M102U/M104U Front And Back Views Name and Function of Parts Front Panel Select Button USB Keyboard & Mouse Port Rear Panel Console Audio/ Microphone Jacks DC Power Jack USB Devices Console Monitor Port PC Audio/ Microphone Jacks PC Keyboard/ VGA/ Mouse Ports Flash Upgrade Hardware Installation Here we will explain how to connect the console and the computers to the JC-M102U/ M104U switch unit. Please follow the steps below closely as shown.
JC-M102U/M104U Hardware Installation Before starting with connecting your computers and console devices to the JC-M102U/ M104U, make sure that everything is powered off. Connecting devices while power is not off may lead to damage to your computers or the JC-M102U/ M104U KVM switch. Justcom will not be held responsible for damage caused in this way. 1.Place the JC-M102U/ M104U in a convenient location, its small size makes it easy to place it on the desktop.
JC-M102U/M104U Hardware Installation 3. Connect your audio and microphone to the rear panel of the JCM102U/ M104U. The male 3.5mm plug to the audio and microphone in the console of your JC-M102U/M104U as show below. Microphone Speakers 4. Attach the power supply to the JC-M102U/ M104U unit and plug the power supply into a power source. Now you will see the LED for Port 1 light up, and you will hear a beep. Switch on your Monitor.
JC-M102U/M104U Hardware Installation 5. Now the PC connections will be made with the USB (keyboard, mouse), speaker, microphone, and 15-pin monitor (VGA) connections to the JUSTCOM All-in- 1 cable. Connect cable with the male side to the rear panel of the JC-M102U/ M104U unit to the connector labeled CPU1. Repeat this for all PCs. Keyboard Mouse VGA Audio Microphone 6. Now power up all computers simultaneously, the first computer will be shown on the monitor.
JC-M102U/M104U Hardware Installation 7.Once everything is plugged correctly, Windows will detect the built-in 2 USB Hubs, then can connect any USB device to USB1, 8.Even if Windows asks for drivers. The JC-M102U/ M104U drivers are built in. So all you need to do is keep hitting NEXT until loads complete and shows finish in Windows.
JC-M102U/M104U Hardware Installation 1.Click Next 4. Click Next 2. Click Next 5. Click FINISH 3. Make sure no boxes are checked.
JC-M102U/M104U Operation Channel Selection Hot Key commands on keyboard, or you can directly select which computer you wish to control by pressing the direct-access port selector which is located next to the port for the corresponding console. You will find that behind the unit switches to another computer, the mouse will be stop for about 1-2 seconds. This ensures USB sync is linked without problem. When you operate with commands through simple keyboard key sequences (be pressed [SCROLL LOCK] key twice).
JC-M102U/M104U Operation Note : Directly selects to Channel or Hub. For example, if you press 1. (SCROLL LOCK)(SCROLL LOCK)(C)(2), means the Channel on the (2) port, not Hub. 2. (SCROLL LOCK)(SCROLL LOCK)(H)(2), means the Hub on the (2) port, not Channel. 3. (SCROLL LOCK)(SCROLL LOCK)(A)(2),means all (Channel and Hub) on the (2) port. Troubleshooting General Problems Q: I am getting ghosting shadowing or fuzzy images on my monitor.What do I do? A:ƤCheck the cables and make sure they are inserted Properly.
JC-M102U/M104U FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
JC-M102U/M104U Limited Warranty JUSTCOM provides this limited warranty for its product only to the person or entity who originally purchased the product from JUSTCOME or its authorized reseller or distributor.
JC-M102U/M104U Limited Software Warranty: JUSTCOM warrants that the software portion of the product ( Software ) will substantially conform to JUSTCOM's then current functional specifications for the Software, as set forth in the applicable documentation, from the date of original delivery of the Software for a period of ninety (90) days ( Warranty Period ), if the Software is properly installed on approved hardware and operated as contemplated in its documentation.
JC-M102U/M104U Authorization (RMA) number from the Authorized JUSTCOM Service Office and, if requested, provide written proof of purchase of the product (such as a copy of the dated purchase invoice for the product) before the warranty service is provided. After an RMA Number is issued, the defective product must be packaged securely in the original or other Suitable shipping package to ensure that it will not be damaged in transit, and the RMA.
JC-M102U/M104U On-Screen Display Menu Control Limitation of Liability: To the maximum extent permitted by law, JUSTCOM is not liable under any contract, negligence, strict liability or other legal or equitable theory for any loss of use of the product, inconvenience or damages of any character, whether direct, special, incidental or consequential (including, but not limited to, damages for loss of goodwill, work stoppage, computer failure or malfunction, loss of information or data contained in, stored on,
Registration Card Print, type or use block letters. Your name: Mr./Ms___________________________________________________________ Organization:________________________________Dept.
