User's Manual
During installation
Firmly fix the fixing nuts so that the product is not loosened from the toilet.
Installation position
The bidet is a product installed inside a bathroom, so make sure to choose a spot where water does not
splash on the product.
After installation
Keep the separated toilet seat where it can avoid direct sunlight so it is not damaged.
Cold water pipe
Make sure to connect it to the cold water pipe.
(If connected to the hot water pipe, the filters and hoses can get damaged.)
When installing remote controller
Install the remote controller next to the bidet.
Before attaching double-sided tapes on the remote controller holder, make sure to remove dust and alien
substances from the surface.
When attaching the remote controller holder, use the silicon installation materials.
How to replace remote controller battery
Insert a coin or driver into the groove and turn it CCW to make one turn, then the screws will be loosened
and the battery cover will be removed.
Then, replace the batteries (1.5 V AAA, 3 batteries) and fix the screws again.
Turn the screws CW to fix them.
*
Be careful not to lose the screws by mistake.
Installation
Consult with a Coway technician for the detailed installation method to ensure optimal performance of the product.
Be Careful!
28
03 MAINTENANCE