User's Manual

EN
 
Remove existing toilet seat
Install product
󾖴󾖴
As the bidet should be installed on the toilet, ensure that water is not splashed onto the bidet.


󾖻
Remove the existing toilet seat ❶ and
seat cover ❷ by removing the fixing nuts.
Turn off the main water supply valve ❶ and
separate the existing water tank hose ❷.
Connect the rubber packing, 3/8" T-shaped
connector and water tank hose in this order
to the existing water pipe which size is
3/8". Please connect the bidet hose to the
T-shaped connector.








1
2
1
2
󾖴󾖴
Keep the removed toilet seat in a shaded location to
prevent it from being damaged.
Bidet hose
Water pipe
Water tank
hose
T-shaped 
connector
29