User's Manual

91
12 OPERATOR CONVENIENCES
VS-3 VOICE SYNTHESIZER (OPTIONAL)
Install the optional VS-3 unit to use this function.
Each time you change the transceiver mode such as
VFO A/B or Memory Recall, the transceiver
automatically announces the new mode. In addition,
you can program the front panel [PF] key so that
pressing it makes the transceiver announce the
displayed information. If you have the optional
MC-47 microphone, you can program one of the Mic
[PF] keys for this function as well.
For an explanation on how to install the VS-3 unit,
refer to “INSTALLING OPTIONS” {page 96}.
The table below indicates what the transceiver
automatically announces when it changes the
settings.
For the [PF] key, the transceiver will announce
different information, depending on whether Voice 1
or Voice 2 is selected.
Voice 1:
• VFO or memory channel frequencies are
announced beginning with the 10 MHz digit and
continuing through to the 10 Hz digit. If the
memory channel has no data stored, “open” is
announced. For the MHz decimal point, “point” is
announced. For the kHz decimal point, a short
pause (200 ms) is made. A 200 ms pause is also
made between the channel number and the
frequency.
desserPyeK noitarepO tnemecnuonnA
]B/A[
AOFV
ycneuqerf+OFV
BOFV
]LLAC[ lennahcllaCycneuqerf+llaC
]M/OFV[
roOFV
yromeM
llaceR
ycneuqerf+OFV
ro
.oNyromeM+RM
ycneuqerf+
]UNEM[
.oNuneM
noitceles
+.oN+uneM
/rebmundetceleS
retemarap
]TNE[
ycneuqerF
yrtne
retnE
HC/ITLUM
lortnoc
.oNuneM
segnahc
+.oN+uneM
/rebmundetceleS
retemarap
yromeM
.oNlennahc
segnahc
yromeM+RM
+.oNlennahc
ycneuqerf
yekciremuN
yrtne
gniretnE
srebmun
rebmunyrevE
deretne
]•[
ehtgniruD
ycneuqrf
yrtne
ztrehageM
• Menu numbers and their settings are announced
with a short pause (200 ms) between the menu
number and the setting.
Note: If operating a key or a control changes the contents of the
display while an announcement is in progress, the announcement
is interrupted.
Voice 2:
• The S-meter readings at the time you pressed the
key, are announced, for example, “S5” or “20dB”.
The table below shows the available announcement
when the [PF] (Voice2) is pressed.
1 Assign Voice 1 or Voice 2 to the front panel [PF]
key by accessing Menu No. 51A. Or, if you are
using the optional MC-47 microphone, assign one
of the Mic [PF] keys to either Voice 1 or Voice 2.
For programming Mic [PF] keys, refer to
“PROGRAM FUNCTION KEYS” {page 77}.
2 Press the [PF] key that you programmed.
• An announcement is made based on the Voice
1 or Voice 2 selection.
• To interrupt the announcement, press the [PF]
key again.
NIAM BUS
reteM-S
leveL
-ecnuonnA
tnem
reteM-S
leveL
-ecnuonnA
tnem
3-11S11S
42S22S
6-53S33S
74S44S
9-85S55S
016S66S
21-117S77S
318S88S
51-419S99S
81-61Bd0101Bd01
02-91Bd0211Bd02
22-12Bd0321Bd03
52-32Bd0431Bd04
82-62Bd0541Bd05
03-92Bd0651Bd06