GPS NAVIGATION SYSTEM DNX6140/6000EX DNX5140 DDX514 DDX5034/BT MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System/DVD Receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Contents How to read this manual Before Use Notes Navigation Control 4 6 7 14 Using the Navigation System 14 Navigatoin Information Interrupt on the Screen of Other Sources (DNX6140/DNX6000EX/DNX5140 only) 14 Control of Other Sources While Displaying the Navigation Screen 15 Watching DVD/VCD 16 Functions During the Playback Screen 16 Functions When Displaying the Easy Control Panel 17 Functions While Displaying the Control Screen 17 DVD Disc Menu 18 VCD Zoom Control 20 Music Disc & Audio File Listen
How to read this manual This manual uses illustrations to explain its operations. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. Seek Mode Sets a station selection. The mode is switched in following order each time you touch the button.
Notes Before Use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. How to reset your unit • If the unit or the connected unit (disc auto changer, etc.) fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.
Notes About Audio files About Picture files Region codes in the world • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) • Acceptable picture files JPEG • Extensions jpg, jpeg • Acceptable media CD-R/RW/ROM, DVD±R/RW, mass-storage-class USB device Acceptable discs, disc formats, USB device file system, file and folder names and playing order are the same as those for audio files. See .
Basic Operations C A Selecting a source SI indicator Press it to display the source select screen. Touch the source button to select the source. B Full Source Select screen 8 3 C 4 1 5 D 6 1 E 7 2 C B Turns power ON/OFF Switches to the Navigation system Press the button to turn on the power. When the button is pressed and held down for 1 second or more, the power is turned off. Press the button to switch the display to the navigation system screen.
Basic Operations D Switching the function screen A SI indicator The function control screen switches in the following order each time you press the button. B Navigation screen C D Picture or Video playback screen Source Control screen [FNC] button [FNC] button [FNC] button Easy Control buttons appear. Easy Control buttons appear. Navigation information appears.
Navigation Control Sets and controls the navigation system function. Control of Other Sources While Displaying the Navigation Screen 8 When touched this area, the source control screen appears. Selected source can be controlled while displaying navigation screen. When "TUNER" is selected: 9 1 Display the easy control buttons Using the Navigation System Displays the navigation system screen and makes the navigation function available.
Watching DVD/VCD You can play DVD/VCD using various functions. Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen • For the basic method of how to watch DVD/VCD, see (page 10). • Set the remote controller mode switch to "DVD" mode before starting operation, see (page 90). Displays the basic operation buttons on the screen. Switches to the source control screen to use various playback functions.
Watching DVD/VCD 9 Stops playing. When pressed twice, the disc is played from its beginning when you play it in the next time. p Selects a chapter, a scene or a track. When the VCD is paused, touch this button to start single-frame stepping. q Plays or pauses. w Slow Forwards or Backwards. (during DVD play) e Switches the Repeat Play operations in the following sequence.
Music Disc & Audio File Listening Watching DVD/VCD You can recall various control screens during CD/Audio file playback. VCD Zoom Control Displays an enlarged VCD screen. • For the basic method of how to play a music disc/audio file, see (page 10). • See (page 7) for playable discs. • See (page 8) for playable files.
Video File/Picture Watching Music Disc & Audio File Listening During Audio file playback 18 20 19 21 22 23 24 24 26 27 26 28 28 29 30 31 34 25 32 33 35 36 37 38 39 b MUSIC, MOVIE or PICTURE indicator n Appears when a disc is inserted. m Repeats to play the music or data of the present folder. , Displays images in the folder currently being played one after another. If there is no image in the folder currently being played, initial background is displayed.
Video File/Picture File Watching Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen Displays the basic operation buttons on the screen. Switches to the source control screen to use various playback functions.
Radio Listening Various control screens appear in the Tuner Source mode. Seek Mode 19 • For the basic method of receiver button operations, see (page 10). • Set the remote controller mode switch to "AUD" mode before starting operation, see (page 90). Functions While Displaying the Control Screen Switches to the source control screen to use various functions.
# Radio Listening Auto Memory Manual Memory Radio Text Set Station Name Stores stations with good reception in memory automatically. Stores the current receiving station in memory. You can display the radio text. (Only when receiving the FM broadcast) Assigns a name to a station. 1 Select a band you wish to store in memory 1 Select a station you wish to store in memory : Press for # seconds.
iPod Control Radio Listening You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP301V (optional accessory). You can also display video contents on this unit when connecting an iPod with video. Traffic Information Search for Program Type When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. A program is tuned when you set its program type.
iPod Control Functions While Displaying the Control Screen 1 19 Switches to the source control screen to use various playback functions. 20 14 22 20 When Video or picture is playing, press the [FNC] button. 23 15 Mode:Full iPod AV–OUT:AV–IN 00002/00006 P 0:00:05 IN or [iPod] button on the "Source Select" screen 2 1 17 18 o Categories and music are listed. Touch a category name to move its lower level. If music title is displayed, the music is played by touching it.
USB Device Control You can control and listen to songs in your USB device by simply connecting it to the USB connector of this unit. 2 1 u Displays images in the folder currently being played one after another. If there is no image in the folder currently being played, initial background is displayed. For information on setting the image display time, see (page 64). i Displays the folder list. See (page 36). o Displays the list of category.
Sirius/XM Control (North American sales area only) USB Device Control Folder Select Searches folders and Audio files stored in the USB device according to hierarchy. Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite radio connected only. To connect the Sirius tuner, a conversion cable CA-SR20V (optional accessory) is necessary and to connect the XM tuner, an XM interface Box KCA-XM100V (optional accessory) is necessary.
# Sirius/XM Control (North American sales area only) Channel Search Channel Memory Direct Channel Search Specifying the desired category and selecting a channel. Stores the current receiving channel in memory. Tuning in by entering the desired channel number. 1 Select a channel you wish to store in memory 1 Start Channel Search 2 Store in memory 2 Select a category 1 Start Direct Channel Search 2 Enter the channel number 1 2 : Press for # seconds. 2 1 3 2 3 1 Selects a category.
HD Radio Control Various control screens appear in the HD Radio Source mode. (with the optional accessory HD Radio tuner connected only) Seek Mode Auto Memory Sets a station selection mode. Stores stations with good reception in memory automatically. 1 Select a band you wish to store in memory Functions While Displaying the Control Screen Switches to the source control screen to use various functions. 9 Switches the button display. p Selects the Auto Memory mode.
# HD Radio Control : Press for # seconds. Manual Memory Receive mode Stores the current receiving station in memory. Sets the radio broadcasts receive mode. 1 Select a station you wish to store in memory 2 Store in memory 1 Display the Receive mode screen 2 Select the receive mode 1 1 2 Continue to touch until the memory number appears. 42 1 The Receive mode switches in the following order. Auto: Automatically tunes to analog broadcast when there is no digital broadcast.
Bluetooth Audio Control Muting Audio Volume upon Reception of Phone call You can listen to audio files stored in Bluetooth audio player and cell-phone. For DNX5140/DDX514/DDX5034, Bluetooth unit KCA-BT200 (optional accessory) is necessary. When the telephone is called, the system is paused automatically. Before Use For DNX6140/DNX6000EX/DDX5034BT : • You need to register your audio player and cell-phone before using it with this unit. For more details, see (page 80).
Character Entry Screen Control When you select the Set Station Name mode or others, the following screen appears for character entry. Setting the monitor screen. How To Use the Character Entry Screen Screen Control Character Entry screen Turning the Dimmer function On or Off according to the Navigation Day/Night display setting. 7 Returns to the previous screen. 1 Display Easy Control panel 1 1 3 2 ⁄ 7 • The Screen Control screen is displayed only when you have applied the parking brake.
Hands Free Unit Control Various functions can be used in the Hands Free control mode. For DNX5140/DDX514/DDX5034, Bluetooth unit KCA-BT200 (optional accessory) is necessary. Before Use • To use the Phonebook, it must be downloaded to this unit in advance. For details, see (page 48). For DNX6140/DNX6000EX/DDX5034BT : • You need to register your cell-phone before using it with this unit. For more details, see (page 80).
Hands Free Unit Control Calling by Entering a Phone Number Quick Dialing Controlling Tone-based Services Calling by Phonebook Makes a call by entering a phone number. You can register up to 6 phone numbers for quick dialing. Uses tone base service using DTMF (Dual Tone Multi Frequency). You can call a person using his/her phone number that you have registered in the Phonebook. 1 Display the number input screen ⁄ • Phone numbers must be registered in advance. See (page 58).
Hands Free Unit Control r Calls the selected phone number. t Creates an SMS for the displayed phone number. See (page 59). y Scrolls the phone number. u Displays the Phonebook data list. i Returns to the Hands-Free Control screen. Cyrillic alphabet search screen 5 2 2 3 Calls by selecting a phone number from the outgoing or incoming calls list.
Hands Free Unit Control Calling by Voice Recognition If you hear another Beep sound: Speak the key word within 2 seconds after the Beep, or touch the [Phonebook List] button to select the phone number. Calls by recognizing the registered voice. ⁄ • In order to perform voice recognition, voice must be registered in the Phonebook data. See (page 56). Or, to perform voice recognition by Phone number category (Home, Office, Mobile etc.
Hands Free Unit Control Voice Registration 5 End voice registration Registers voice for voice recognition in Phonebook. Up to 35 voices can be recorded in one cell-phone. Key Word Voice Registration 4 Utter the voice to register (1st try) Registers the voice to select the Phone number category by Voice Recognition. 7 1 Display the Key Word List screen 1 Select the name to register Display the "Hands Free" screen and touch [Setup]. See (page 48).
Hands Free Unit Control p Deletes the currently displayed phone number. q Returns to the previous screen. Phone Number Preset Registers frequently used phone number to Hands Free control screen preset button. 1 Display the Hands Free Preset List screen Display the "Hands Free" screen and touch [Setup]. See (page 48). 4 Search phone number to register with each function SMS (Short Message Service) SMS Message screen Uses SMS function.
Setup Menu You can set up various receiver parameters. Crossover Network Setup DVD Setup You can set a crossover frequency of speakers. You can set up the DVD play. 1 Select the speaker to set the crossover Touch Menu" screen (page 60). Setup Menu Audio Setup Displays the Setup menu to set various functions. You can setup a speaker network, etc. 1 Display the control screen of any source 1 2 2 • [Audio Setup] cannot be selected under the following conditions: – When no source is selected.
Setup Menu 6 7 8 Language Setup Parental Level Setup Selects a language you use for the speech and menus. Sets a parental level. 4 Select a parental level and complete the setup 1 Display the Parental Level code number screen 9 1 Select the language item to set 10 6 Returns to the "DVD Setup 1" screen. 7 Sets an angle mark display.*1 ( "On") 8 Selects the screen display mode.*1 ( "16:9") "16:9": Displays wide pictures.
# Setup Menu System Setup 6 7 8 You can set up the system parameters. 9 t Selects a picture display time. ( "Long") The Display of a JPEG picture is changed. ("Short", "Middle", "Long") 1 Display the System Setup screen Touch Menu" screen (page 60). : Press for # seconds. 4 Adjusts the Blue value. 5 Returns to the "Panel Color Coordinate" screen. 3 Select a Preset number to register in the "Setup Panel Color Coordinate Sets the screen and button illumination color.
Setup Menu AV Interface Setup 5 You can set audio and visual (AV) interface parameters. 11 6 7 12 8 13 9 14 10 15 1 Display the AV Interface screen Touch Menu" screen (page 60). in the "Setup 5 Returns to the "AV Interface 1" screen. 6 Moves to the "AV Interface 3" screen. 7 Selects an AV source to be output at the AV OUTPUT port. ( "AV-IN") 2 Setup each item 1 2 3 4 1 Moves to the "AV Interface 2" screen.
Setup Menu User Interface You can set up user interface parameters. 1 Display the User Interface screen Touch Menu" screen (page 60). in the "Setup 2 Setup each item 1 2 3 4 1 Moves to the "User Interface 2" screen. 2 Selects the background to display. "Change": Displays images entered into this unit. See (page 71). 3 Enables entering or deleting of background images into or from this unit. Press to enter the USB suspend mode, and then remove the USB device.
Setup Menu Entering Background Background Delete Background Select Touch Panel Adjustment Loads a image for background. Deletes the background image. Selects a image for background. You can adjust the touch panel operations. 1 Connect the device which has the image to load 1 Delete the image you have loaded 1 Select Background Change screen 1 Display the Touch panel Adjustment screen Touch Menu" screen (page 60). 2 Display the User Interface screen Touch Menu" screen (page 60).
Setup Menu Clock Setup Monitor Setup You can adjust the clock time. You can adjust the position, picture quality and the screen mode of the monitor. 8 Selects a screen mode of the DVD playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" 9 Selects a screen mode of the iPod VIDEO playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" p Selects a screen mode of the USB playback screen.
Setup Menu Security Code Setup 4 Register your security code You can set a security code to protect your receiver system against theft. If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code ⁄ • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice.
Setup Menu iPod Setup Sirius Setup Sirius Parental Code Setup Performs setup when using iPod. You can set up the Parental lock for Sirius. Sets a Sirius Parental code. 1 Display the iPod Setup screen Touch Menu" screen (page 60). in the "Setup 1 Display the Sirius Setup screen Touch Menu" screen (page 60). 4 Confirm the code number Enter the same code number as you input in step 3.
Setup Menu Sirius Parental Lock Setup Sets a Sirius Parental Lock function on or off. Sirius Parental Lock Channel Select Selects the channel to enable Sirius Parental lock function. 1 Display the Parental Code screen Bluetooth Setup 4 Set the parental lock for each channel 7 5 6 1 Display the Bluetooth Setup screen 1 Display the Parental Code screen Touch Menu" screen (page 60). 6 8 9 • You need to complete beforehand.
Setup Menu Registering Bluetooth Unit 4 Enter PIN code Registers the Bluetooth unit to be connected. Enter the PIN code specified for the Bluetooth unit to register. 1 Display the Connect Device List screen 12 Registering Bluetooth Unit PIN Code Registering Special Bluetooth Unit Sets the PIN code of this unit (DNX6140/ DNX6000EX/DDX5034BT only) or KCA-BT200 to enter when registering (pairing) from the cellphone or audio player side.
Setup Menu Bluetooth Unit Connection Deleting Bluetooth Unit Software Information Selects the Bluetooth unit to connect. Deletes the registered Bluetooth unit. Checks the software version of this unit. 1 Display the Connect Device List screen 1 Display the Connect Device List screen 1 Display the Software Information screen Touch Menu" screen (page 60).
Setup Menu Setup Memory 3 Memorize or recall the settings Audio Set Up and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Display the Setup Memory screen Touch Menu" screen (page 60). in the "Setup When memorizing the Audio Setup and AV Interface settings: If settings have already been memorized, a confirmation message appears. Touch .
Audio Control 9 Adjusts the volume of the present source based on the difference level of original volume. ⁄ Audio Control Menu Audio Control Displays the Audio Control menu to set the sound effect function of this unit. You can adjust the front/rear and right/left audio balance. • If you have increased the volume first, then reduced the volume using the "Vol. Offset", the sound generated if you suddenly switch to another source may be extremely loud. Equalizer Control You can set up the equalizer.
Audio Control Tone Setup Zone Control You can set a Tone curve. You can set the front and rear audio source. 1 Display the Tone screen set to "Front", "DVD" or "USB", the same source screen or control screen is displayed in the rear monitor. See (page 66). 1 Display Zone Control in the "Audio Touch Control Menu" screen (page 86). 1 See (page 87). 2 Set the Tone 1 2 5 3 6 4 7 1 Displays the current source.
Remote Controller O DISP • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. • Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.
Remote Controller Folder search Selects the folder to be played. Track number Play time Cancel O FM+ SRC OPEN VOL D Y 1 2 ZONE Track search and file search Selects the track or file to be played. O FM+ OPEN VOL 1 D O Y 2ABC 3 DEF 1 Folder number File number Cancel FNC/PBC TOP MENU MENU AUDIO SUBTITLE AM− FM+ D Y Track number Cancel RETURN ANGLE ZOOM 1 O V.
DVD Language Codes 94 Code Language Code Language Code Language aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gli gn gu ha he hi hr hu hy ia ie ik id Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian
Help? Troubleshooting Some functions of this unit may be disabled by some settings made on this unit. ! ! ! ! General ? • Cannot select the output destination of the subsource in the Dual zone. • Cannot adjust the volume of the rear speakers. ▲ The Dual zone function is disabled. ☞ (page 88) Cannot play audio files. ▲ "CD Read" of (page 64) is set to "2". the preout jack. Tuner source ? ! Cannot perform Repeat play. ▲ The PBC function is enabled.
Help? Error When the unit fails to operate correctly, the cause of the failure appears on the display. Protect : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. Error 07–67: The unit is not operating correctly due to some reason or other. Check Sirius: The unit cannot recognize the connected Sirius Tuner Box. ➡ Push the unit's Reset button. If the "Error 07−67" message does not disappear, see your nearest Kenwood dealer.
Specifications Monitor section USB interface section Picture Size : 6.1 inches (diagonal) wide : 136.1 mm (W) x 72.0 mm (H) Display System : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 336,960 (480H x 234V x RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : Cold Cathode Fluorescent Tube USB Standard : USB 1.1/ 2.
2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J.