NX-5000 series USER GUIDE GUIDE DE L'UTILISATEUR GUÍA DEL USUARIO The illustration shows operation panel attached models.
VHF DIGITAL TRANSCEIVER NX-5700 NX-5700(B) UHF DIGITAL TRANSCEIVER NX-5800 NX-5800(B) USER GUIDE • • SDTM and microSDTM are trademarks of SD-3C, LLC in the United States. and/ or other countries. The Bluetooth® word mark and logo are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
THANK YOU We are grateful you have chosen KENWOOD for your Digital Transceiver applications. This User Guide covers only the basic operations of your radio. Ask your dealer for information on any customized features they may have added to your radio. For using details instruction manual, refer to the following URL. http://manual2.jvckenwood.com/en_contents/search/ CONTENTS NOTICES TO THE USER ................................................................................. 3 PRECAUTIONS ..................
NOTICES TO THE USER ◆ Government law prohibits the operation of unlicensed radio transmitters within the territories under government control. ◆ Illegal operation is punishable by fine and/or imprisonment. ◆ Refer service to qualified technicians only. Safety: It is important that the operator is aware of, and understands, hazards common to the operation of any transceiver. ◆ EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.
PRECAUTIONS Observe the following precautions to prevent fire, personal injury, and transceiver damage. • • • • • • • • • • • Do not attempt to configure the transceiver while driving; it is too dangerous. Do not disassemble or modify the transceiver for any reason. Do not expose the transceiver to long periods of direct sunlight, nor place it near heating appliances.
TERMINAL DESCRIPTIONS ACC (D-SUB 25 Pin Connector) Pin No.
UNPACKING AND CHECKING EQUIPMENT Note: ◆ The following instructions are for use by your KENWOOD dealer, an authorized KENWOOD service facility, or the factory. Carefully unpack the transceiver. We recommend that you identify the items listed below before discarding the packing material. If any items are missing or have been damaged during shipment, file a claim with the carrier immediately. SUPPLIED ACCESSORIES DC power cable (with fuses) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PREPARATION Various electronic equipment in your vehicle may malfunction if they are not properly protected from the radio frequency energy which is present while transmitting. Typical examples include electronic fuel injection, anti-skid braking, and cruise control. If your vehicle contains such equipment, consult the dealer for the make of vehicle and enlist his/her aid in determining if they will perform normally while transmitting.
When replacing the fuse in the DC power cable, be sure to replace it with a fuse of the same value. Never replace a fuse with one that is rated with a higher value.
ORIENTATION OPERATION PANEL (ATTACHED PANEL OR KCH-19) a d b ef c g h a [ ] (Power) switch Press to switch the transceiver ON or OFF. b [ ] / [ ] keys Press to activate its programmable function. The default key setting is [Volume Up]/ [Volume Down]. c [ ] / [ ] keys Press to activate its programmable function. The default key setting is [Channel Up]/ [Channel Down]. d Illumination sensor Sensor for Auto Dimmer Function. e Microphone jack Insert the microphone plug into this jack.
DISPLAY Basic Frame Function Indicator Area Main Area Key Guide Area Display Area Description Function Indicator Area Displays the various function icons, signal strength indicator, battery power indicator and clock. Main Area Display the information of the transceiver such as Channel number and Zone number. Key Guide Area Display the key functions for [ ], [ ], [ ] and [ ] keys. Function Indicator Indicator Description Displays the signal strength. The channel is using high transmit power.
Indicator Description The Scrambler function is activated. The Encryption function is activated. The Encryption (AES) function is activated. The Encryption (DES) function is activated. The Talk Around function is activated. The Monitor or Squelch Off is activated. The External Speaker is activated. The External Speaker (Internal + External) is activated. The Noise Reduction function is activated. Blinks when an incoming call matches your Optional Signaling. A message is stored in memory.
BASIC OPERATION SWITCHING POWER ON/ OFF Press [ ] to switch the transceiver ON. Press [ ] again to switch the transceiver OFF. ADJUSTING THE VOLUME Press the key programmed as [Volume Up] to increase the volume. Press the key programmed as [Volume Down] to decrease the volume. SELECTING A ZONE AND CHANNEL Select the desired zone and channel using the keys programmed as [Zone Up]/ [Zone Down] and [Channel Up]/ [Channel Down]. • Thetransceiversmayhavenamesprogrammedforzonesandchannels.
© 2014 JVC KENWOOD Corporation
MANDATORY SAFETY INSTRUCTIONS TO INSTALLERS AND USERS • Use only manufacturer or dealer supplied antennas. • Antenna Minimum Safe Distance: 40 cm (16 inches), 50% duty Cycle. • Antenna Gain: 0 dBd referenced to a dipole. The Federal Communications Commission has adopted a safety standard for human exposure to RF (Radio Frequency) energy which is below the OSHA (Occupational Safety and Health Act) limits.