User's Manual

Card feed roller/heating roller
●
The color of the printed card may appear faded or dirt may appear con-
spicuous if the card feed roller/heating roller is dirty.
●
Perform cleaning after printing about 1,000 cards.
Print this page
Note:
●
If the security lock is on, deactivate it. After work is complete, activate
the security lock again.
●
Before cleaning the card feed roller/heating roller, make sure that you
clean the cleaning roller. Otherwise, dirt on the cleaning roller may be
attached to the cleaning card, causing its cleaning capability to deterio-
rate.
●
Stand the cassette on a flat surface as illustrated in the diagram. Avoid
doing so on a floor as dust attached to the retransfer film may cause
printing errors.
●
If card jam occurs when the cleaning card is inserted, turn off and on
the power of the printer. Doing so automatically discharges the card.
●
Do not perform work on the printer door. Do not place heavy objects or
apply load on the printer. Doing so may damage it.
●
Each cleaning card can only be used once. Reusing a dirty card may
dirty the roller or cause the printer to malfunction. For details on the
cleaning card, please consult our authorized dealers.
●
After cleaning is complete, check to ensure that all dismantled parts
are restored to their original positions. Failure to restore the parts may
result in malfunction of the printer.
●
For details on separately sold items, please consult our authorized
dealers.

Open the printer door. Press and hold down the cassette button, and
remove the retransfer film cassette (on the left).

Close the printer door, and remove the card hopper.
Maintenance
36