User's Manual

Bobbin holders
●
The color of the printed card may appear faded or dirt may appear con-
spicuous if burrs are attached to the bobbin holders.
Print this page
Note:
●
If the security lock is on, deactivate it. After work is complete, activate
the security lock again.
●
Stand the cassette on a flat surface as illustrated in the diagram. Avoid
doing so on a floor as dust attached to the retransfer film may cause
printing errors.
●
Do not perform work on the printer door. Do not place heavy objects or
apply load on the printer. Doing so may damage it.
●
Perform cleaning each time you replace the ink ribbon or retransfer
film.
Otherwise, burrs attached to the bobbin holders may fall onto the card,
ink ribbon, or retransfer film, causing printing errors.
●
After cleaning is complete, check to ensure that all dismantled parts
are restored to their original positions. Failure to restore the parts may
result in malfunction of the printer.
●
For details on separately sold items, please consult our authorized
dealers.

Open the printer door.

Press and hold down the cassette button, and remove the ink ribbon
cassette (on the right).

Press and hold down the cassette button, and remove the retransfer
film cassette (on the left).

Apply alcohol to a cotton swab (large), and use it to wipe the four bob-
bin holders.
(Cotton swab and alcohol: sold separately)

Insert the retransfer film cassette along the guide rail until a “click”
sound is heard.

Insert the ink ribbon cassette along the guide rail until a “click” sound is
heard. Close the printer door.
Maintenance
40