ENGLISH SISTEMA DE NAVEGACIÓN GPS SYSTÈME DE NAVIGATION GPS FRANÇAIS KW-NT800HDT / KW-NT700 ESPAÑOL GPS NAVIGATION SYSTEM This HD Radio receiver enables: Only for KW-NT800HDT Sólo para KW-NT800HDT Uniquement pour le KW-NT800HDT Only for KW-NT800HDT Sólo para KW-NT800HDT Uniquement pour le KW-NT800HDT For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare into beam.
(For USA) CAUTION: This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End user cannot modify this transmitter device. Any unauthorized modification made on the device could avoid the user’s authority to operate this device.
ENGLISH This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).
For safety... • Do not raise the volume level too much, as this will block outside sounds, making driving dangerous. • Stop the car before performing any complicated operations. ENGLISH How to forcibly eject a disc Temperature inside the car... If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.
ENGLISH Contents How to forcibly eject a disc .........................................................................5 Introduction .............................................10 Parts identification ...........................................................................10 Parts identification ...........................................................................10 Installation settings..........................................................................12 Basic operations ...............
ENGLISH • Adjusting the volume of the voice guidance .............................................34 • About route guidance screen ....................................................................35 • Getting information on your route and places ..........................................36 Arranging your route ........................................................................37 • Changing the sequence of the destination/via points ...............................
ENGLISH Contents Listening to the iPod/iPhone device ...................................................69 • Selecting a track/video from menu on the iPod/iPhone ............................71 Listening to iHeartRadio with the iPod/iPhone ...................................72 PANDORA® internet radio operations .................................................76 Listening to the SiriusXM radio ..........................................................78 • Activating subscription ............................
ENGLISH • Searching for a phone number from phone book ....................................104 • Deleting the phone number memory in the unit ....................................105 • About mobile phone compatible with Phone Book Access Profile (PBAP) ..... 105 Using Bluetooth audio player ..........................................................106 Bluetooth device settings................................................................107 Rear View Camera Operations.............
ENGLISH Introduction Parts identification 10 EN_KW-NT800HDT_NT700[J].
1 Screen (touch panel) 2 (Eject) button/Security indicator • Adjusts the angle of the front panel (☞ page xx), displays the disc or SD card insert and eject screen. (☞ page xx, xx) • Flashes when the unit is turned off if you have enabled the security indicator. (volume) button 3 Adjusts the audio volume. • About the adjustable volume range, page • To adjust the guidance volume,page 4 button Displays the screen for the current source. 5 button Displays the map for the current location.
ENGLISH Installation settings When you turn on the unit for the first time, the initial setup screen appears. 1 Turn on the ignition switch. The power is turned on, and the startup screen is displayed for about 5 seconds. 2 Select the language you want for the display and the voice guidance. 3 Set the installation settings (1), then press [OK] (2). State/ Province Time Zone * • You can also select the system language through - - .
ENGLISH Basic operations Turning on the power Turn on the ignition switch. Startup screen appears for about 5 seconds. • You can change the startup screen. (☞ page 75) • When displaying the map screen for the first time after turning on the power, the screen below appears. Press [OK] to use the map screen. • The power is turned off when the ignition switch is turned off. Turning off/on the screen Press and hold to turn the screen off. Touch the screen to turn it on again.
ENGLISH Basic operations Setting the security password You can set the startup security password as an antitheft measure. 1 Press 2 6 Enter the same security code, then press [OK]. - . 3 • After setting the security password, entering the security code is necessary each time you turn on the unit. 4 5 Enter a 4-8 digit security code, then press [OK]. Press: Deletes the last character Hold: Deletes all characters 14 EN_KW-NT800HDT_NT700[J].
Changing/clearing the security password ENGLISH Basic operations Operations on the touch panel Repeat steps 1 to 3 on page 12. When items on the menu are not available 1 Non-available items will be shaded 2 Enter the current security code, then press [OK]. To change the page of menu/list Menu Changes the page 3 If you want to clear the security code, stop here. The security code has been cleared. If you want to change the security code, go to the next step.
ENGLISH Basic operations Quick menu Scrolling the track/song information When all the text is not shown at once... You can assign your frequently used features to the quick menu. It is activated from the current position screen. 1 • Note that when driving, the album name and artist name are not displayed, and the song name does not scroll. Characters you can use 2 3 Touch the button you want to configure. 4 Touch the feature you want to assign to the button.
Adjust the angle of the front panel Extending/shortening the auto antenna You can adjust the angle of the front panel to compensate for the effects of glare etc., making the screen easier to read. When is set to , [ ] is not displayed. (☞ page xx) 1 Press 2 Press [ Front panel angle -1 0 5 ENGLISH Basic operations . ] or [ ]. 1 Press . 2 Select the desired angle. Press [ [ • The front panel moves to the selected angle.
ENGLISH Switching screens Navigation mode ■ Map screen ■ Destination Menu Use this screen to search for a destination using one of the available search methods. ■ Settings Menu ■ Function Menu Use this screen to change the detailed settings and get information about the navigation system. Use this screen to get information about your destination and the travel route. 18 EN_KW-NT800HDT_NT700[J].
ENGLISH Switching screens AV mode ■ AV screen Displays the screen for the current AV source. ■ Source selection screen Use this screen to select an AV source. The AV control bar is displayed on the map screen. You can perform AV source operations using the AV control bar. Erases the AV control bar While driving at a speed greater than 6 mi (10 km/h), some screens on the navigation menus are not available. 19 EN_KW-NT800HDT_NT700[J].
ENGLISH Navigation System Safety instructions/information for the Navigation System SAFETY INSTRUCTIONS Terms of licence Use of the Navigation System is only permitted if the traffic conditions are suitable and you are absolutely sure that no risk, obstruction or inconvenience will be incurred to you, your passengers or other road users. The requirements of the Road Traffic Regulations must always be followed. The destination must not be entered while driving the car.
ENGLISH Basic operations About the current position screen Favorite points (☞ pages 17 and 34) Your position Current time POI (Point Of Interest) (☞ “List of POI icons”, page 43) Direction Scale Home (☞ pages 17 and 34) Zoom buttons (☞ below) Traffic information (only for KW-NT800HDT) (☞ page 35) Shows the AV control bar (☞ page 12) Current street Shows the quick menu (☞ page xx) To change the map scale Speed limit on the current street To change the map view 1 Display the zoom buttons and scale
ENGLISH Basic operations 2 Select categories or [ To scroll the map ] on the right of the POI that you want to be displayed on the map. The position you touched is centered on the map. • If you press a category, all items in that category are highlighted and selected. If you want to select items individually, press ] and select items to be displayed on [ the map. If you press highlighted buttons, they become unhighlighted and the selection is cancelled.
You can register one point as your home or 100 favorite points. ENGLISH Registering your home/favorite points 4 1 Scroll the map to select the position you want to select as a destination. • To search the destination using menu, ☞ pages xx to xx. 2 5 • To edit the information about the registered points, ☞ step 5 on page 39. 3 Notice: If you have already registered a destination as your home, a confirmation message is displayed when you select .
ENGLISH Searching for a place Setting a destination by scrolling the map 1 Scroll the map to select the position you 3 The search result is displayed. want to select as a destination. (☞ page 16) 2 Guidance starts. • To set the search result as the destination and start guidance, ☞ page xx. If there are several POIs on the selected position, press [ ] to switch to the next POI. 24 EN_KW-NT800HDT_NT700[J].
Setting a destination using the menu 1 Press . Home * Goes to your home. • To register your home, ☞ page 17. • To start guidance, ☞ page xx. Favorites * Searches from your favorite points. • To register your favorite points, ☞ page 17. • To edit the information about the favorite points, ☞ page 34. Previous * Searches from the history of previous destinations and via points. • You can select a place from the last 50 destinations and via points. • To delete the history, ☞ page 39.
ENGLISH Searching for a place About search screens and input screens Read through the following instructions for using search screens and input screens before using menu. To enter names, addresses, or numbers State/Province selecting screen You can change the State/Province if the selecting button appears on the screen. Hold: Adds “+1” or “+” Number of matches • When there are more than 1000 matches, “1000+” is displayed and only first 1000 matches are displayed.
By address
1 4 Enter the house number, then select from the list. (☞ page 20) • If no data of house number for the selected street is available in the database, select [Middle of Road] or [Intersection]. ENGLISH Searching for a place 2 Enter the city name, then select from the list.ENGLISH Searching for a place POI near a place/route The System has a huge database of POIs (Point Of Interest), such as restaurants, gas stations, hospitals, etc. You can search for a POI around the place where you are now. While guided, you can also search for a POI near the destination or along the route. 4 Select a POI from the list. 1 • The System displays up to 50 POIs. 2 Select a category for the POI. The search result is displayed. • To start guidance, ☞ page xx.
From the list of POI To specify the category and sub-category 1 ENGLISH Searching for a place 2 Enter the POI name, then select from the list. (☞ page 20) Changes State or Province Displays POI in alphabetical Displays POI based on their order distance Displays POI in alphabetical order Displays POI based on their distance Press to select a category of POI The System displays up to 100 POIs.
ENGLISH Searching for a place By telephone number By coordinates 1 1 2 Enter the telephone number (1), then select 2 Enter the latitude and the longitude. from the list(2). (☞ page 20) Changes country The search result is displayed. • To start guidance, ☞ page xx. The search result is displayed. • To start guidance, ☞ page xx. 30 EN_KW-NT800HDT_NT700[J].
By NaviCon When you connect your iPhone with the “NaviCon” application installed to the system, you can manipulate the map, search and set destinations on the system using the iPhone screen. Sending registered information to the system and setting as destinations Manipulate the map on the system from “NaviCon” 1 Search for “NaviCon” in the Apple iTunes App When you connect your iPhone to the system, the map on the iPhone screen also appears on the navigation screen.
ENGLISH How you are guided Starting guidance to the destination or via point 1 Select a destination or via point. (☞ pages 18 2 3. Select a route (1), then press [OK](2). to 27) To set as destination The estimated time and distance to the destination are displayed. If the route includes toll roads, the toll the first and last interchange names are also displayed. [Fastest]: The recommended route. [Shortest]: The shortest route. [Freeway]: The recommended route when using freeways.
ENGLISH How you are guided Changing route options 1 Press 2 5 Set options. . Priority 3 Toll Road Ferry 4 Select the priority for route calculation ([Fastest]: fastest route/[Shortest]: shortest route/[Freeway]:route using freeway/[Avoid Freeway]: route avoiding freeway). Select whether to use ([Use]) or avoid ([Avoid]) these types of options to go to the destination. 6 Press [ ]. The selected options become effective and you will be returned to the previous screen. 33 EN_KW-NT800HDT_NT700[J].
ENGLISH How you are guided Canceling guidance Adjusting the volume of the voice guidance 1 1 2 2 • You can also adjust the volume through - - - . (☞ page xx) 34 EN_KW-NT800HDT_NT700[J].
About route guidance screen Direction, distance, and estimated time of arrival (ETA) at the destination ( ) or a via point ( ) • Press to switch the information between the final destination and the nearest via point. Distance to the next turn • Press to listen to the last voice guidance again. ENGLISH How you are guided Next street Next turn to make The second turn to make (if any) Route to take Shows AV control bar Lanes to take (Appears when coming within 3 mi (5 km) of it.
ENGLISH How you are guided Getting information on your route and places To check the entire route - . 1 Press 2 To confirm how your trip will go To check the information on the destination and via points 1 Drive simulation starts. 2 Select a desired point to check its detailed information. Changes the speed of the drive simulation (x1/x2/x3) Cancels the simulation and resume guidance 36 EN_KW-NT800HDT_NT700[J].
Changing the sequence of the destination/via points • Highways are always used to calculate the route if distance to a destination exceeds a certain distance. • If the destination cannot be reached without using highways, ferries, or toll roads, they are used to calculate the route without respect to the settings. (☞ page 40) 1 ENGLISH Arranging your route To delete a via point Press [ ] after selecting the item you want to delete, then press [Recalculate].
ENGLISH Arranging your route Adjusting the vehicle position If you find your current position is displayed on a wrong place on the map, use this setting to correct your position. 3 Move the cursor to the position where you want to set as current position. To adjust the direction of the vehicle, press [Direction]. • If you do not want to adjust the direction, press [OK]. 1 2 4 Adjust the direction. 38 EN_KW-NT800HDT_NT700[J].
1 Select a registered point you want to edit. 5 Edit the information. A Displays the name editing screen Selects your home ENGLISH Editing registration of home/favorite points C Displays the icon selection screen B Displays the phone number editing screen Displays the favorite point list and select one to edit on the list A To edit the name • You can use up to 30 characters. 2 Displays other keyboards • For available characters, ☞ page 11. 3 Select the category for the favorite point to edit.
ENGLISH Using information service (Only for KW-NT800HDT) This function is available on KW-NT800HDT only, not equipped with on KW-NT700. Using the traffic information service (Total Traffic HD NET WORK Service) Traffic Flow As the traffic information is transmitted by radio stations, JVC cannot assume responsibility for the completeness or accuracy of the information.
This function is available on KW-NT800HDT only, not equipped with on KW-NT700. Checking the traffic information On the map From 1 Touch the traffic icon. ENGLISH Using information service (Only for KW-NT800HDT) 1 2 Select a list (1), then a traffic alert (2). 2 The icons of traffic alert which are not on your route are shown in gray when all the information is displayed. • If there are several POIs on the selected position, select one from the list.
ENGLISH Using information service (Only for KW-NT800HDT) This function is available on KW-NT800HDT only, not equipped with on KW-NT700. Using the area information service (Total Traffic HD NET WORK Service) You can use the information service provided by HD Radio broadcasts. • The contents of the information service depends on the HD Radio station. To display the information screen To bookmark favorite items You can store favorite items on the bookmark list. [ ]: Displays the bookmark list.
1 2 3 4 5 System Info 6 7 1 2 3 8 Sensor Status 9 p 4 5 6 7 8 9 p q q w Version of the software Version of the map database Serial number Speed pulse rate GPS antenna connection status : Receiving GPS signals (the figure shows the number of GPS satellites being received). : Not receiving GPS signals. Status of the gyroscope Status of calibration *1 *2 : The current position cannot be determined without data from GPS satellites.
ENGLISH Initializing navigation settings The initial settings of the navigation menu can be restored. 3 1 4 2 A confirmation message appears. 44 EN_KW-NT800HDT_NT700[J].
ENGLISH Navigation menu items Switches the category by pressing the corresponding tab Menu items View Mode POI Icon Favorite Icon Map Vehicle Icon Color configuration Current Street Name Speed Limit Sign Drive Tracks Delete Drive Tracks Selectable settings , , Initial: Underlined (☞page xx) Selected (highlighted), Deselected (not highlighted) (☞page xx) Select whether to show or hide the favorite icon on the map.
ENGLISH Navigation menu items Menu items Guidance Volume* Attention Tone* Guide Voice Guide Speed Alert Traffic Lane 3D Junction View Priority Toll Road Ferry Traffic Flow Traffic Icon Bypass Traffic Hybrid TTN+ Mode Scale Unit Others Traffic (Only for KW-NT800HDT) Route Magnified View Vehicle Position Selectable settings Initial: Underlined Adjust the volume of the voice guidance. (The adjustment does not affect the audio volume.
• The route calculated by the System is one of the possible routes to your destination. The route is not always the most appropriate one. • If no-exit roads (only entering the rotary from the roads is allowed) exist on the rotary, the no-exit roads can neither be shown in the route guidance on the display nor counted in the route guidance voice message. • The following phenomena may occur even if the System is working correctly... – It may guide to a closed road or to a route requiring U-turn.
ENGLISH Additional information List of POI icons Gas Station Entertainment Community Parking Casino Child Service Restaurant Museum Education Coffee/Desserts Night Club/Bar Government/Administration Coffee/Pastries Theater Health/Safety Desserts/Smoothie Others Insurance Finance Legal Service Recreation ATM Bowling Center Multimedia Bank Golf Course Police/Fire Service Outdoor Post Office Shopping Religious Ski Resort Beauty Theme Park/Exercise Book Store Zoo Auto Part
ENGLISH AV Operations Common operations on source screen
ENGLISH Listening to the HD Radio™ broadcast (For KW-NT800HDT) You can tune in to both conventional and HD Radio broadcasts. About HD RadioTM Technology • Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD. • Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams.
ENGLISH Listening to the HD Radio™ broadcast (For KW-NT800HDT) Station frequency currently tuned in Band PTY code for the HD Radio broadcast Only when receiving HD Radio station: the song information currently received Displays the album artwork or the station or the station logo*. * The station logo is displayed when there is no album artwork. If there is no artwork or station logo available, the default artwork is displayed.
ENGLISH Listening to the HD Radio™ broadcast (For KW-NT800HDT) Changing HD Radio reception mode Storing stations in memory While receiving an HD Radio broadcast, you can change the reception mode — digital or analog. • This setting cannot take effect for the conventional FM/AM stations. Automatic presetting—SSM (Strong-station Sequential Memory) You can preset six channels for each band. 1 1 2 2 A confirmation message appears.
Manual presetting Selecting a preset station 1 Tune in to a station or channel you want to 1 Display the preset list. preset. (☞ page 45) ENGLISH Listening to the HD Radio™ broadcast (For KW-NT800HDT) Band The station frequency you want to preset 2 2 Display the preset list. Also changes preset stations Reducing the interference 1 3 Select a preset number. [Hold] 2 Auto Wide Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.
ENGLISH Listening to the HD Radio™ broadcast (For KW-NT800HDT) Bookmarking the song You can bookmark the current song. 1 • If you have your device read the QR code, the bookmark information will be transferred to the device. • When the bookmark information is long and not fully displayed, touch the icon to scroll and display the rest. Displaying the list of bookmarked songs You can bookmark the current song. Deleting the bookmark 1 1 2 2 Select the items to delete (1), then delete them (2).
ENGLISH Listening to the HD Radio™ broadcast (For KW-NT800HDT) Tagging/purchasing your favorite songs from iTunes Store Some HD Radio broadcasts provide PSD (Program Service Data) for a song. You can tag the song and store its PSD while listening to the song. By using the tagging function, you can easily purchase the songs from iTunes Store. Step 1: Tagging the song While receiving a song with PSD...
ENGLISH Listening to the HD Radio™ broadcast (For KW-NT800HDT) Step 2: Transferring the tagged PSD to your iPod/iPhone Step 3: Purchasing songs from iTunes Store • iTunes 7.4 or later version is required to purchase the tagged songs. • For details about iPod/iPhone and iTunes, refer also to the instructions supplied with the iPod/iPhone or visit . 1 Connect the iPod/iPhone to the PC. 2 Synchronize the iPod/iPhone to the iTunes.
ENGLISH Listening to the radio (For KW-NT700) Storing stations in memory You can preset six channels for each band. Automatic presetting—SSM (Strong-station Sequential Memory) Manual presetting 1 Tune in to a station or channel you want to 1 preset. (☞ page 45) Band The station frequency you want to preset 2 2 Select a preset number. [Hold] A confirmation message appears. Local stations with the strongest signals are searched and stored automatically. To stop searching, press [4] or [¢].
ENGLISH Listening to the radio (For KW-NT700) Selecting a preset station Reducing the interference 1 Display the preset list. 1 2 2 Auto Also changes preset stations Wide Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. 58 EN_KW-NT800HDT_NT700[J].
~ Insert a disc. Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. The source changes to “DISC” and playback starts. Label side ENGLISH Disc operations • If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc.
ENGLISH Disc operations Playable disc types Disc type Recording format, file type, etc. Playable DVD DVD Video (Region Code: 1) *1 • DTS sound cannot be reproduced or output from this unit.
Only for DVD Video/DVD-VR: ] or touching the screen shows the operating buttons and playback information on the screen. Pressing [ The operating buttons and playback information disappear by pressing DISP or when no operation is done for about 5 seconds. Audio format ENGLISH Disc operations Playback mode Disc type Playback status (8: pause/7: stop) Title no./Chapter no./ Playing time [3 / 8] [7] [4] [¢] [Angle] [Audio] [Subtitle] [Menu] [Top Menu] Starts playback/pauses. Stops playback.
ENGLISH Disc operations VR playback mode—VR-PRG Audio format (program) or VR-PLAY (playlist) Disc type Playback mode Playback status (8: pause/7: stop) Program no. (or Playlist no.)/Chapter no. (or file no.)/Playing time [3 / 8] Starts playback/pauses. [7] Stops playback. [4] [¢] Press: Selects chapter. Hold: Reverse/forward search . (Search speed: x2 ] x10) [Audio] Selects audio channel (ST: stereo, L: left, R: right). [Subtitle] Shows (ON)/hides (OFF) the subtitle. [Play List] Displays the Playlist.
Playback mode Disc type Playback status (8: pause) ENGLISH Disc operations Track no./Playing time The track information appears when it is recorded. [3 / 8] Starts playback/pauses. [4] [¢] Press: Selects track. Hold: Reverse/forward search. [ ][ ] [Mode] Selects playback modes. (☞ page 55) Changes the settings for disc playback. (☞ page 56) Audio format (MP3/WAV/WMA) Playback mode Playback status (8: pause) Disc type Folder no./Track no./ Playing time Tag data appears only when it is recorded.
ENGLISH Disc operations Selecting playback modes For CD/MP3/WAV/WMA For DVD/DVD-VR Playback mode Playback mode Selects Random playback mode Selects Repeat playback mode • For DVD: CHAP. TITLE • You cannot activate the repeat mode and the random mode at the same time. Repeats current chapter. Repeats current title. • For CD: • For DVD-VR CHAP. PROG. Selects Repeat playback mode TRACK DISC Repeats current chapter. Repeats current program (not available for Playlist playback).
ENGLISH Disc operations Settings for the disc playback Disc Setup items Menu Language Audio Language Subtitle Language D. Range Compression Monitor Type Selectable settings Initial: Underlined Select the initial disc menu language; Initial English. (☞ also page 77) Select the initial audio language; Initial English. (☞ also page 77) Select the initial subtitle language or erase the subtitle (Off); Initial Off.
ENGLISH SD/USB operations This unit can play the MP3/WMA/AAC/FLAC/MPEG4/MPEG4-AVC H.264/WMV files stored in SD card/USB mass storage class device. • All tracks in the SD card/USB device will be played repeatedly until you change the source. • Make sure all important data has been backed up. Inserting SD card Connecting USB device You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, etc. to the unit.
ENGLISH SD/USB operations Audio format (MP3/WMA/AAC/FLAC) Playback mode Playback status (8: pause) Source type (“SD” or “USB”) Folder no./Track no./ Playing time While playing, “Jacket picture” is shown if the file has the tag data including “Jacket picture”. [3 / 8] [4] [¢] [ [ ][ ] Tag data appears only when it is recorded. *1 (Current folder name and file name appear if not recorded.) Starts playback/pauses. Press: Selects track. Hold: Reverse/forward search. ] Selects folder.
ENGLISH SD/USB operations MPEG4/MPEG4-AVC H.264/WMV MPEG4/MPEG4-AVC H.264/WMV VR playback mode—VR-PRG (program) Audio format or VR-PLAY (playlist) Source type (“SD” or “USB”) Playback mode Playback status (8: pause) Current folder name and file name Folder no./Track no./ Playing time [3 / 8] Starts playback/pauses. [4] [¢] Press: Selects chapter. Hold: Reverse/forward search . (Search speed: x2 ] x10) [ ] Selects Random playback mode. *1 *2 • FOLDER: Randomly plays all tracks of the folder.
Setting the iPod control mode and the speed of the audio books Connecting iPod/iPhone • Use the following cables: – To listen to the music: USB 2.0 cable (accessory of the iPod/iPhone) – To watch the video: USB Audio and Video cable for iPod/iPhone—KS-U49 (not supplied) MIC Head Mode ENGLISH Listening to the iPod/iPhone device AV IN/OUT i Pod VIDEO iPod Mode USB 2.
ENGLISH Listening to the iPod/iPhone device • The operations explained in this manual are under Head mode (☞ page 59). • When External mode is selected, only [ ] and [ ] are displayed. Track no./Total track number/Playing time , * Playback mode 1 Playback status (8: pause/7: stop) While playing, Artwork (the picture displayed on the screen of iPod/iPhone) is shown if the song contains the Artwork.
Selecting a track/video from menu on the iPod/iPhone • Available categories depend on the type of your iPod/ iPhone. 1 ENGLISH Listening to the iPod/iPhone device *1 These categories are shown in the language selected on your iPod/iPhone. Searching for items in the selected category by alphabet and number 2 Select the menu (Music or Video) (1), a 1 category (2), then a desired item (3). Music menu: Select the item in the selected layer until a desired track starts playing.
ENGLISH Listening to iHeartRadio with the iPod/iPhone You can connect your iPod touch/iPhone to this unit and listen to iHeartRadio. What is iHeartRadio? iHeartRadio is an iPod touch/iPhone application that can deliver access to over 750 local radio stations in both AM and FM, as well as commercial-free and artist-programmed channels. All stations are streamed in highquality AAC format. Connecting iPod touch/iPhone 1 Start the iHeartRadio application by your iPod touch/iPhone.
iHeartRadio mode Channel number*1 ENGLISH Listening to iheartradio with the iPod/iPhone Station name 7 : Sound off Song information Displays the album artwork or the station logo.*2 [3 / 7] Turns the sound on and off. [4] [¢] Selects the previous/next favorite station. [Random] Randomly selects a station. [Stations] Displays the Station List. [ ] [ ] [Tag] Storing your favorite stations (☞ page 64) Returns to iPod touch/iPhone playback. Tags the current song.
ENGLISH Listening to iheartradio with the iPod/iPhone Searching from the Station List You can use the Station List screen to search for stations. 1 Select [Stations]. Storing your favorite stations Favorite stations that were stored are displayed in the Station List. (☞ left) The station currently being listened to is added to the [Favorites] station list. • A maximum of 100 stations can be added to the [Favorites] station list. • Stations are added to the end of the [Favorites] station list.
To delete the station from the favorite list Searching for stations in All Cities category by alphabet 1 Select (1), and then select (2). 1 2. Select items to delete (1), and delete them ENGLISH Listening to iheartradio with the iPod/iPhone 2 Display the first character of the station you (2). The selected items are marked “✔”. want to search for (1), then search for a station (2). Erases the search operation buttons Selects/deselects all items A confirmation message appears.
ENGLISH PANDORA® internet radio operations Preparation Install the latest version of the PANDORA® application to your iPhone. • Select “PANDORA” as the source. (☞ page 59) • You can operate PANDORA using the remote controller (for KW-NT800HDT/KW-NT700 : separately purchased). Only playing, pausing, and skipping are available. Playing time Station name Playback status (8: pause) Song information • Touching an information bar scrolls the text if not all of the text is shown.
Selecting station from the Station List About Pandora® internet radio The requirements for listening to Pandora are as follows: • Use an Apple iPhone or iPod touch running under iOS3 or later. • Search for “Pandora” in the Apple iTunes App Store to find and install the latest version of the Pandora® application on your device. • In the application on your device, log in and create an account with Pandora. (If you are not already a registered user, an account can also be created at www.pandora.com.
ENGLISH Listening to the SiriusXM radio Before operating, connect the SiriusXM tuner (not supplied) to the expansion port on the rear of the unit. (☞ Installation/Connection Manual) Activating subscription 1 Select “SiriusXM” as the source. (☞ page 44) SiriusXM Tuner starts updating all the SiriusXM channels. 2 Check your Radio ID. Radio ID is labeled on the casing of the SiriusXM Tuner or the bottom of the SiriusXM Tuner unit. • You can also display the Radio ID on the screen by tuning in to Channel 0.
Storing channels in memory Selecting on the list You can preset six channels for each band. 1 1 Tune in to a station you want to preset. ENGLISH Listening to the SiriusXM radio (☞ page 67) 2 Display the preset list.(☞ page 69) 3 Select a preset number you want to store. 2 Select a category. [Hold] 3 Select a channel. Selecting preset channels 1 Display the preset list.(☞ page 69) 2 Select a preset number. Also changes preset channels 79 EN_KW-NT800HDT_NT700[J].
ENGLISH Listening to the SiriusXM radio 2 Enter a 4-digit new code number (1), then Selecting a channel directly press [OK] (2). 1 Press: Deletes last character Hold: Deletes all characters 2 Enter the channel number (1), then confirm (2). 3 Enter the same code, then press [OK]. 4 Select the category, then the channel you want to activate the channel locking.
• When you try to receive a channel or select a channel directly by entering the channel number with the channel locking activated, the lock code input screen appears and you cannot receive the channel until you enter the correct code. Activating the channel locking 1 Display screen. ENGLISH Listening to the SiriusXM radio Changing the lock code 1 Display screen. 2 Enter your lock code number (1), then press [OK] (2).
ENGLISH Listening to the SiriusXM radio To clear the selection of channels with the channel locking activated Skipping the unwanted channels If you do not want to receive some channels, you can skip them. 1 On screen. Setting the channel skipping 1 Activate the channel skip function. On screen. 2 Press: Deletes last character Hold: Deletes all characters 2 Select the category, then the channel you want to skip. Channel locking code input screen appears.
You can connect an external component to the LINE IN/VIDEO IN jacks. (☞ Installation/Connection Manual) 1 Select as the source. (☞ page 44) 2 Turn on the connected component and start playing the source. ENGLISH Using other external components Source type The following buttons appear while playing video with selected as the source. Hides/displays the operating buttons on the screen. [ ] Adjusts the picture. (☞ page 72) ] [ • Select an appropriate setting on .
ENGLISH Changing illumination color You can change the illumination color of the buttons on the monitor panel. 1 Press Storing your own adjustments - . • When variable color illumination is selected, you cannot adjust the color. 2 1 After selecting a color in step 5 on the left... 3 2 Adjust the color. 4 3 Store the adjustment into or . 5 Select a color. Your own color stored (☞ right) Variable color illumination • Illumination color changes gradually.
Picture adjustment Changing the aspect ratio You can adjust the picture quality for video playback such as DVD, iPod video, video from an external component or camera. 1 Display the adjustment menu. You can change the aspect ratio for video playback. 1 After displaying the adjustment menu in step 1 on the left... 2 4:3 signal 16:9 signal Full: For 16:9 original pictures Regular: For 4:3 original pictures Auto: • For “DISC” only: Aspect ratio is automatically selected to match to the incoming signals.
ENGLISH AV menu items Region Menu items Time Zone*1 DST (Daylight Saving Time)*1 Adaptive Volume Audio Guidance Mute Reverse Audio Reduction Start Up Sound Level Illumination color Clock on Video/Screen-Off Display Dimmer Brightness: Day Off-axis Viewing Selectable settings Initial: Underlined Select your residential area from one of the following time zones for clock adjustment.
Connection Menu items Antenna Remote Camera Input*1 AV Input Beep Shortcut button Others Security Password Security Indicator Demonstration Restore Factory Default Selectable settings Initial: Underlined Auto: Antenna remote output is always on. Manual: Allows user to turn on/off antenna remote output. On, Off (☞ page 87) You can determine the use of the LINE IN and VIDEO IN jacks. (☞ page xx) AV: Select when connecting an AV component such as a camcorder.
ENGLISH Additional information • USB devices equipped with special functions such as data security functions cannot be used with the unit.• Do not use a USB device with 2 or more partitions. • Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose. • This unit may not recognize a memory card inserted into the USB card reader. • Connect only one USB device to the unit at a time. Do not use a USB hub.
Sound signals emitted through the rear terminals Through the analog terminals (Speaker out/F OUT/R OUT) 2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed. • DTS sound cannot be reproduced.
ENGLISH Sound Settings Setting the Sound You can set the audio effects and sound quality in the vehicle here. Set the sound when the AV source is selected. This cannot be set when the tuner is on standby. 1 Press - . 2 Touch . Setting Fader/Balance You can set the right and left, and front and rear volume balance here. 1 Press - . 2 Touch . 3 Set each item. 3 Touch the position to be balanced. The following items can be set.
Setting the vehicle type Setting the speaker configuration You can set the vehicle type here. 1 Press - . 2 Touch . You can set the vehicle’s speaker configuration here. ENGLISH Setting the Sound 1 Press - . 2 Touch . 3 Select a vehicle type and touch it. 3 Touch a speaker to be set. The DTA suitable for the selected vehicle type is set. If you want to adjust the sound in more detail, set the listening position.
ENGLISH Setting the Sound To change the crossover frequency of the speakers: 5 Touch or next to to set the size of the speaker. Set the front/rear speakers, crossover frequency, slope (attenuation rate) and phase of the subwoofer. 1 Touch . 6 If the size is unknown, select <16-1/2”>. If there is no speaker, select . Only for the front speaker, touch or next to to set the size of the tweeter.
4 Only when you select the front speaker and Setting the listening position the size of the tweeter is set for the front speaker in the speaker settings, touch or to set the tweeter output level. You can select the listening position here to set a better sound field for the people inside the vehicle. ENGLISH Setting the Sound Before setting this listening position, be sure to set the vehicle type. (☞ page xx) 1 Press - . 2 Touch .
ENGLISH Setting the Sound To fine-tune the DTA for the listening position: You can select the listening position here to set a better sound field for the people inside the vehicle. 5 1 Select a listening position. 2 Touch . Furthermore, if is used for the adjustment, adjust the DTA while listening to the sound. Repeat steps 3 and 4 to set all of the speakers. • When the sizes of the rear speaker and subwoofer are set to , the DTA of those speakers cannot be adjusted.
Setting the preset equalizer The preset equalizer can be set by source here. 3 Trace the equalizer curve on the screen you want to set. 1 Select a source you want to set and press ENGLISH Setting the Sound - . 2 Touch . 3 Select a genre of the preset equalizer and touch it. 4 You can touch the central frequency to select the frequency and touch or to set the level. Touch . 5 Touching resets the equalizer curve to the default setting. Select the destination.
ENGLISH Setting the Sound Setting the volume of each source equal Setting the audio effects You can set various audio effects here. Set the audio effects when the AV source is selected. They cannot be set when the tuner is on standby (audio off). Set the volume of each source equal against the volume of a music CD. 1 Press - . 2 Touch . 1 Press - . 2 Touch
ENGLISH Setting the Sound The following items can be set. Menu items Bass Boost Loudness Space Enhancer Sound Stage Elevation Road Noise Compensation Audio Contrast Digital Track Expander Selectable settings Level 3 Level 2 Level 1 Off* Level 2 Level 1 Off* Large Medium Small Off* Level 3 Level 2 Level 1 Off* Level 3 Level 2 Level 1 Off* Level 3 Level 2 Level 1 Off* On Off* Description Sets the level that the bass is boosted. Turns Bass Boost off.
ENGLISH Setting the Sound Setting the hardware Sets the built-in amplifier output and pre-out terminal output. 1 Press - . 2 Touch . 3 Touch an option and select it. 4 Touching resets the level adjustments of all source levels to ±0. Touch . The screen returns to menu. The following items can be set. Menu items Amplifier Selectable Description settings On* Turns the built-in amplifier on. Off Turns the built-in amplifier to off.
Information for using Bluetooth® devices Warning messages for Bluetooth operations ENGLISH Bluetooth Operations “Cannot connect. Please The device is registered but connect from your the connection has failed. device.” Connect from your phone, or use to connect the device again (☞ page 80). “System can not connect Disconnect the current with this device. Please device, then operate another device to connect. disconnect current device, then connect from this device.
ENGLISH Using Bluetooth device Registering a Bluetooth device For connecting a Bluetooth audio player To connect a Bluetooth device for the first time When you connect a Bluetooth device to the unit for the first time, make pairing between the unit and the device. Pairing allows Bluetooth devices to communicate with each other. • Once you register a Bluetooth device, the device remains registered until the registration is deleted. (☞ page 80) • Up to 5 devices can be registered in total.
5 ENGLISH Using Bluetooth device 2 To connect 6 Operate the Bluetooth device to connect. Cancel Select the device you want to connect. PIN code (initial: 0000) : mobile phone / : audio player / and audio player “Connected” appears. Press [OK] to confirm the operation. Now connection is established and you can use the Bluetooth device through the unit. • All registered devices (mobile phone and audio player) are listed on . – Selectable items depend on the device you are operating.
ENGLISH Using Bluetooth mobile phone Receiving a call When a call comes in/making a call... On map screen: The mobile phone control bars appear. Adjusting the volume of calls/ earpiece Ends/rejects the call On AV screen: Call information (if acquired) Decrease Increase • This adjustment does not affect the volume level of the other sources. • About the adjustable volume range, ☞ page 73 (). This adjustment does not affect the microphone volume. It is adjusted automatically.
Switching between handsfree mode and phone mode Using the phone book/call lists While talking... [ [ [ [ Each time you press the button, the talking method is switched. The corresponding indicator lights in orange ( : handsfree mode / : phone mode). ENGLISH Using Bluetooth mobile phone ] From dialed call list. ] From received call list. ] From missed call list. From phone book. ] • For copying the phone book, ☞ page 83. • For searching for a number, ☞ page 83.
ENGLISH Using Bluetooth mobile phone Copying the phone book You can copy the phone book memory of a mobile phone into the unit (up to 500 memories). 1 Display . Searching for a phone number from phone book 1 2 Display the first character of the name you 2 want to search for (1), then search for a name (2). Press the character button repeatedly until the desired item is displayed. • Only available characters are selectable. • When selecting other character than the alphabet, press [#].
Deleting the phone number memory in the unit 1 Display the phone book/call list you want to delete. (☞ page 82) 2 About mobile phone compatible with Phone Book Access Profile (PBAP) ENGLISH Using Bluetooth mobile phone When your mobile phone supports PBAP, phone book and call lists are automatically copied to the unit.
ENGLISH Using Bluetooth audio player • To activate “BT Audio” for source selection, ☞ page 75 (). • To register a new device, ☞ page 79. • To connect/disconnect a device, ☞ page 80. Battery reminder (only when the information comes from the device) Playback mode Playback status (8: pause/7: stop) Track no.
ENGLISH Bluetooth device settings For Bluetooth mobile phone 1 Menu items Phone Connection Audio Connection PIN Code Device Name Device Address Auto Connect Auto Answer* BT Audio 2 Selectable settings Initial: Underlined Connect: ☞ page 80 Disconnect: ☞ page 80 Connect: ☞ page xx Disconnect: ☞ page xx Displays the PIN code of the unit. • To change the PIN code, press [Change], enter a new PIN code, then press [OK].
ENGLISH Rear View Camera Operations Using a rear view camera • To use a rear view camera, the reverse gear signal lead connection is required. For connecting a rear view camera, ☞ Installation/Connection Manual. Activating the rear view camera 1 Press - - - . 2 To deactivate the rear view camera, select [Off] for . Displaying the picture from the rear view camera The rear view screen is displayed when you shift the gear to the reverse (R) position.
ENGLISH References Maintenance Caution on cleaning the unit To keep discs clean Do not use any solvent (for example, thinner, benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit. Recommended cleaning method: Gently wipe the panel with a soft, dry cloth. A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from centre to edge.
ENGLISH Troubleshooting/error messages What appears to be trouble is not always serious. Check the following points before calling a service center. • For operations with the external components, refer also to the instructions supplied with the adapters used for the connections (as well as the instructions supplied with the external components). Symptoms • Adjust the volume to the optimum level. • Check the cords and connections. The screen is not clear and legible.
Symptoms Navigation voice cannot be heard from the speakers. Remedies/Causes Guidance volume level is set to the minimum level. Adjust it to the optimum level. (☞ page 40) ENGLISH Troubleshooting/error messages Navigation The voice guidance does not come out from the Change the
iTunes Tagging HD Radio reception Navigation ENGLISH Troubleshooting/error messages Symptoms Remedies/Causes “There is no available traffic information now.” No valid traffic information is available now. Try one of the followings: • Move to the place where you can receive traffic service. • No traffic information on your route. Display the list of all traffic information. (☞ page 36) “Selected coordinates are out of map area. The coordinates you have entered are not available. Press Please input again.
SD/USB MP3/WMA/WAV Disc in general Symptoms Remedies/Causes Playback does not start. • Insert the disc correctly again. • The format of files is not supported by the unit. Sound and pictures are sometimes interrupted or distorted. • Stop playback while driving on rough roads. • Change the disc. No playback picture is shown and caution message about parking brake appears on the screen, even when the parking brake is engaged. Parking brake lead is not connected properly.
SiriusXM radio iPod/iPhone SD/USB ENGLISH Troubleshooting/error messages Symptoms While playing a track, sound is sometimes interrupted. Remedies/Causes The tracks are not properly copied into the SD card/USB device. Copy tracks again, and try again. “No Files” The SD card/USB device has no playable files. Change the SD card/USB device. “No SD Card” No SD card is inserted. Insert an SD card or select another playback source. “No USB Device” No USB device is connected.
Bluetooth AV-IN/Front Aux SiriusXM radio Symptoms Remedies/Causes “Channel Not Available” Selected channel is no longer available or is unauthorized. Select another channel or continue listening to the previous channel. “Ch Unsubscribed” Selected channel is not part of your current subscription plan. Call 1-866-635-2349 to subscribe. “Subscription updated. Press [OK] to continue.” Your subscription is updated. Press [OK] button to continue. “Subscription updated.
Rear view camera ENGLISH Troubleshooting/error messages Symptoms The rear view screen is not displayed when the gear is shifted to the reverse (R) position. Remedies/Causes • Check setting. (☞ page 87) • Check the connection. The rear view screen is displayed when the gear Check the connections. is not in the reverse (R) position. “No Signal” Check the connection. Specifications Design and specifications are subject to change without notice.
Power Output Signal-to-Noise Ratio AMPLIFIER Load Impedance Equalizer Control Range Audio Output Level LINE OUT (F OUT/R OUT), SUBWOOFER Video Output (composite) VIDEO OUT Other Terminals FM/AM TUNER (HD Radio System Compatible) Frequency Range FM Tuner AM Tuner ENGLISH Specifications 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N 80 dBA (reference: 1 W into 4 Ω) Level Line-Out Level/Impedance Output Impedance 4 Ω (4 Ω to 8 Ω allowance) 62.5 Hz, 100 Hz, 160 Hz, 250 Hz, 400 Hz, 630 Hz, 1 kHz, 1.
GENERAL MONITOR BLUETOOTH USB SD DVD/CD Signal Detection System Frequency Response Non-contact optical pickup (semiconductor laser) DVD, fs=48 kHz/96 kHz 16 Hz to 20 000 Hz CD Dynamic Range 93 dB Signal-to-Noise Ratio 95 dB Wow and Flutter Less than measurable limit Compatible File System FAT 32/16/12 Capacity 8 Mbytes to 32 Gbytes Data Transfer Rate Maximum 10 Mbps USB Standards USB 2.0 High Speed Data Transfer Rate High Speed: Maximum 480 Mbps Full Speed: Maximum 12 Mbps Low Speed: Maximum 1.
END-USER TERMS The Map Data Disc (“Data”) is provided for your personal, internal use only and not for resale. It is protected by copyright, and is subject to the following terms (this “End-User License Agreement”) and conditions which are agreed to by you, on the one hand, and NAVTEQ North America, LLC (“NT”) and its licensors (including their licensors and suppliers) on the other hand.
ENGLISH Disclaimer of Liability: NT AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO YOU IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT, WHICH MAY RESULT FROM THE USE OR POSSESSION OF THIS DATA; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Fabricado bajo licencia de Dolby Laboratories. Dolby y el símbolo de la doble D son marcas comerciales de Dolby Laboratories. Fabriqué sous licence de Dolby Laboratories. Le terme Dolby et le sigle double D sont des marques commerciales de Dolby Laboratories. • “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries.
Having TROUBLE with operation? Please detach the monitor panel, then attach it Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! EN, SP, FR © 2012 JVC KENWOOD Corporation Cover4_NT800HDT_NT700[J]_001A.