AV-32/28H5BU/SU / LCT1800-001A-U / All Cover LCT1800-001A-U_Cover.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 1 Monday, February 7, 2005 4:30 PM How to move the TV When moving the TV, make sure that it is held by two people as shown in the illustration. Be careful not to trap your hands when putting the TV down.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 2 Monday, February 7, 2005 4:30 PM Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. • Avoid damaging the AC plug and power cord.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 3 Monday, February 7, 2005 4:30 PM CONTENTS PICTURE menu ...................................... 21 Connecting the aerial and VCR ................. 4 Connecting the power cord to the AC outlet....................................................... 5 Putting the batteries into the Remote control..................................................... 5 Initial settings ............................................. 5 T-V LINK FUNCTIONS ....
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 4 Monday, February 7, 2005 4:30 PM Setting up your TV Caution • Turn off all the equipment including the TV before connecting anything. Connecting the aerial and VCR • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. If connecting a VCR, follow A → B → C. Aerial If not connecting a VCR, follow 1.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 5 Monday, February 7, 2005 4:30 PM Setting up your TV Connecting the power cord to the AC outlet Caution When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the onscreen display to make the initial settings. 0 TV Putting the batteries into the Remote control Use two AA/R6 dry cell batteries.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 6 Monday, February 7, 2005 4:30 PM Setting up your TV 2 Press the a button The LANGUAGE menu appears. LANGUAGE TV OK D0002(E) -EN AUTO PROGRAM 3 Press the 5 and 6 buttons to choose ENGLISH. Then press the a button English is set for the on-screen display description. The COUNTRY menu appears as a sub-menu of the AUTO PROGRAM function. There are two COUNTRY menus.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 7 Monday, February 7, 2005 4:30 PM Setting up your TV 6 Press the a button to display the T-V LINK menu T-V LINK DOWNLOAD TV TV RECORDING DEVICE OK 7 If you do not have a T-V LINK compatible VCR connected: Press the b button to exit the T-V LINK menu. The T-V LINK menu disappears.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 8 Monday, February 7, 2005 4:30 PM Setting up your TV 2 When the settings are completed, the EDIT menu is displayed. Return to the instructions that you were reading before, and continue the operation When the “Initial settings” has been made: Return to step 6 of “Initial settings” on page 5. When the “AUTO PROGRAM” has been made: Return to step 6 of “Initial settings” on page 5.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 9 Monday, February 7, 2005 4:30 PM Setting up your TV T-V LINK FUNCTIONS When a T-V LINK compatible VCR is connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features: A “T-V LINK compatible VCR” means a JVC VCR with the T-V LINK logo or a VCR with one of the following logos. However, these VCRs may support some or all of the features described below.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 10 Monday, February 7, 2005 4:30 PM Setting up your TV TV Auto Power On/VCR Image View When the VCR starts playing, the TV automatically turns on and the images from EXT-2 terminal are displayed on the screen. When the VCR menu is operated, the TV automatically turns on and the images from EXT-2 terminal are displayed on the screen. • This function does not operate if your TV’s main power is turned off.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 11 Monday, February 7, 2005 4:30 PM TV buttons and functions Turn the Main power on Press the Main power button on the TV. The Power lamp lights red and your TV is in the standby mode. Caution ENGLISH To turn the Main power off: Press the Main power button again. The Power lamp goes off. • The main power button on the TV does not fully isolate the TV from the AC supply.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 12 Monday, February 7, 2005 4:30 PM Remote control buttons and functions 1 2 3 4 5 6 7 8 9 0 P TV AV MENU 1 2 3 4 5 6 7 8 9 0 = ~ Muting button Number buttons c button i (hyper sound) button Information button b button 5 buttons # (standby) button Colour buttons a button 6 buttons VCR/DVD/Teletext control button VCR P DVD switch g (text) button Turn the TV on or off from standby mode OK P F.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 13 Monday, February 7, 2005 4:30 PM Remote control buttons and functions Use the 6 buttons: Press the 6 buttons to choose the programme number (PR) you want. Use the PR LIST: PR LIST PR AV 1 2 3 4 5 6 7 8 9 TV Use the o button: Press the o button to choose an EXT terminal.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 14 Monday, February 7, 2005 4:30 PM Remote control buttons and functions To return to a TV channel: Press the b button, the 6 buttons or the Number buttons. To use the Programme number PR 0 (AV): When the TV and VCR are connected only by the Aerial cable, choosing the Programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to the Programme number PR 0 (AV) manually.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 15 Monday, February 7, 2005 4:30 PM Remote control buttons and functions ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. REGULAR: Use to view a normal picture (4:3 aspect ratio) as its original size is. 16:9 ZOOM SUBTITLE: This mode zooms up the Wide Picture (16:9 Aspect Ratio) with subtitles to the full screen.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 16 Monday, February 7, 2005 4:30 PM Remote control buttons and functions Adjusting the visible area of the picture If subtitles or the top (or bottom) of the picture are cut off, adjust the visible area of the picture manually. 1 Press the c button The ZOOM menu appears. 2 Press the a button to display the ZOOM mode indication Indicator is displayed.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 17 Monday, February 7, 2005 4:30 PM Teletext function 0 P TV 4 Choose a teletext page by pressing the 6 buttons, Number buttons or Colour buttons AV To return to the TV mode: Press the b button or g (Text) button.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 18 Monday, February 7, 2005 4:30 PM Teletext function 3 Press and hold down A (Store) button The four page numbers blink white to indicate that they are stored in memory. To call up a stored page: 1 Press the B button to engage the List mode Reveal Some teletext pages include hidden text (such as answers to a quiz). You can display the hidden text.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 19 Monday, February 7, 2005 4:30 PM Teletext function Cancel You can search for a teletext page while watching TV. 2 Press H (Cancel) button The TV programme appears. When the TV finds the teletext page, its page number appears in the upper left of the screen. ENGLISH 1 Press the Number button to enter a page number, or press a Colour button The TV searches for a teletext page.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 20 Monday, February 7, 2005 4:30 PM Using the TV’s menu This TV has a number of functions you can operate using menus. To fully utilize all your TV’s functions, you need to understand the basic menu operating techniques fully.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 21 Monday, February 7, 2005 4:30 PM PICTURE menu COLOUR PICTURE PICTURE MODE CONTRAST BRIGHT SHARP COLOUR HUE COLOUR TEMP. FEATURES TV SOFT NORMAL OK RESET • While the PICTURE menu is displayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, HUE settings to their default settings. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 22 Monday, February 7, 2005 4:30 PM PICTURE menu COLOUR SYSTEM FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu. The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 23 Monday, February 7, 2005 4:30 PM PICTURE menu 4:3 AUTO ASPECT You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio). 4:3 AUTO ASPECT PANORAMIC REGULAR 14:9 ZOOM TV ENGLISH 1 Choose 4:3 AUTO ASPECT then press the a button OK D0017-EN 2 Press the 6 buttons to choose a ZOOM mode.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 24 Monday, February 7, 2005 4:30 PM SOUND menu BALANCE SOUND STEREO/ BASS TREBLE BALANCE HYPER SOUND TV OFF OK You can adjust the volume balance between the left and right speaker. 2 : turn the left speaker’s volume level up. 3 : turn the right speaker’s volume level up. D0019-EN STEREO / I • II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II).
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 25 Monday, February 7, 2005 4:30 PM FEATURES menu To cancel the SLEEP TIMER function: Press the 2 button to set a period of time to “OFF”. FEATURES SLEEP TIMER CHILD LOCK BLUE BACK TV ON OK CHILD LOCK D0023-EN You can set the TV to automatically turn off after a specified period of time. 1 Choose SLEEP TIMER, then press the a button A Sub-menu of the SLEEP TIMER function appears.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 26 Monday, February 7, 2005 4:30 PM FEATURES menu 3 Press the a button The Sub-menu of CHILD LOCK appears. CHILD LOCK PR AV 1 2 3 4 5 6 7 8 9 TV ID CH/CC BBC1 CH CH CH CH CH CH CH CH CH OK 5 ID NO.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 27 Monday, February 7, 2005 4:30 PM FEATURES menu BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an external device. OFF: This function is turned off. ENGLISH ON: This function is turned on.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 28 Monday, February 7, 2005 4:30 PM SET UP menu EDIT/MANUAL SET UP AUTO PROGRAM EDIT/MANUAL LANGUAGE PICTURE TILT DECODER(EXT-2) EXT SETTING TV The EDIT/MANUAL functions are divided into two types: editing of the current Programme numbers (PR) (EDIT functions) and manual registration of a TV channel you want to view to the Programme number (PR) (MANUAL function).
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 29 Monday, February 7, 2005 4:30 PM SET UP menu ID: This function registers a Channel name (ID) to a TV channel. DELETE: This function deletes an unnecessary TV channel. MANUAL: This function manually registers a new TV channel in a Programme number (PR). 3 Press the a button to complete the settings The T-V LINK menu appears.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 30 Monday, February 7, 2005 4:30 PM SET UP menu ID 1 Press the 6 buttons to choose a TV channel Every time you press the 6 buttons, the Programme number (PR) is changed over, and the picture of the TV channel registered in the Programme number (PR) appears on the screen.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 31 Monday, February 7, 2005 4:30 PM SET UP menu 2 Press the green button and start the INSERT function. EDIT ID TV BBC1 OK CH/CC CH 36 CH 21 CH 22 CH 23 CH 24 CH 25 CH CH 27 CH 28 CH 29 0-9 CH/CC D0034 -EN 3 Press the 6 buttons to choose “CC” or “CH” according to the CH/ CC number of the TV channel When the COUNTRY setting is FRANCE: Choose “CH1”, “CH2”, “CC1” or “CC2”.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 32 Monday, February 7, 2005 4:30 PM SET UP menu Other TV channels: If you do not know the correct broadcasting system, set the SYSTEM to “B/G”. If “B/G” is not correct, it results in the fact that you will not hear the sound normally when the TV detects a TV channel. In this case, retry to set the SYSTEM again correctly so that no problem arises.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 33 Monday, February 7, 2005 4:30 PM SET UP menu DECODER (EXT-2) When connecting a Decoder with a T-V LINK compatible VCR connected to the EXT-2 terminal, use the DECODER (EXT2) function to unscramble the scrambled TV channels. 2 Display the TV channel capable of being unscrambled with the Decoder on the TV Even if the Decoder is functioning, a scrambled picture appears at this time.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 34 Monday, February 7, 2005 4:30 PM SET UP menu 1 Choose an EXT terminal EXT SETTING 1 Choose EXT SETTING, then press the a or 3 button The EXT SETTING menu appears. EXT SETTING EXT-1 DUBBING EXT-2 EXT-3 EXT-4 TV TV OK ID LIST S-IN 2 Press the yellow button and set the S-IN (S-VIDEO input). Then press the a button An S-IN (S-VIDEO input) mark is displayed.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 35 Monday, February 7, 2005 4:30 PM SET UP menu ID LIST DUBBING You can have a name corresponding to the devices connected for each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with the name.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 36 Monday, February 7, 2005 4:30 PM SET UP menu TV: The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal. • During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 37 Monday, February 7, 2005 4:30 PM Additional preparation Connecting the external devices Connect the devices to the TV, paying attention to the following connection diagram. ENGLISH Before connecting anything: • Read the manuals provided with the devices. Depending on the devices, the connection method may differ from the figure.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 38 Monday, February 7, 2005 4:30 PM Additional preparation Devices which can output the SVIDEO signal (Y/C signal) such as a S-VHS VCR Connect the device to an EXT terminal other than the EXT-1 terminal. You can choose a video input signal from the S-VIDEO signal (Y/C signal) and regular video signal (composite signal). For details of how to operate the device, see “S-IN (SVIDEO input)” on page 34.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 39 Monday, February 7, 2005 4:30 PM CH/CC numbers When you want to use the INSERT function on page 30, find the CH/CC number corresponding to the Channel number of the TV channel from this table.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 40 Monday, February 7, 2005 4:30 PM CH/CC numbers • When two CH/CC numbers correspond to one Channel number, choose either one according to the current COUNTRY setting. When the COUNTRY setting is other than FRANCE, choose a two-digit CH/CC number. When the COUNTRY setting is FRANCE, choose a three-digit CH/ CC number.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 41 Monday, February 7, 2005 4:30 PM Troubleshooting If a problem arises while you are using the TV, please read this “Troubleshooting” well before you request having the TV repaired. You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 42 Monday, February 7, 2005 4:30 PM Troubleshooting • Have the COLOUR and BRIGHT settings been adjusted properly? Follow the description “BRIGHT” and “COLOUR” on page 21 to try to adjust them properly. • Videotaping teletext is not recommended because it may not record correctly. • When a white and bright still image (such as a white dress) is displayed on the screen, the white part may look as if it were coloured.
AV-32/28H5BU/SU / LCT1800-001A-U / English AV-32&28H5SUBU_Eng.book Page 43 Monday, February 7, 2005 4:30 PM Troubleshooting ENGLISH • If you bring a magnetised device such as a speaker near to your TV, a picture may be warped or unnatural colours appear at the corners of the screen. In this case, keep the device apart from your TV. If the speakers causes such phenomena, use the magnetic-shielded speakers instead. • A picture may be tilted due to the influence of the earth’s magnetism.
AV-32/28H5BU/SU / LCT1800-001A-U / English Body_Eng.fm Page 44 Monday, February 28, 2005 3:30 PM Specifications Item Model AV-32H5SU/AV-32H5BU AV-28H5SU/AV-28H5BU AV-28H5SL/AV-28H5BL Broadcasting systems CCIR B/G, I, D/K, L Colour systems PAL, SECAM • The EXT terminals also support the NTSC 3.58/4.43 MHz system.
AV-32/28H50/32H57SU / LCT1803-001A-U / All Cover LCT1803-001A-U_Cover.
AV-32/28H50/32H57SU / LCT1803-001A-U / All Cover LCT1803-001A-U_Cover.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 1 Monday, February 21, 2005 10:08 AM Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: Distance recommendations ENGLISH • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 2 Monday, February 21, 2005 10:08 AM CONTENTS Setting up your TV ...................................3 PICTURE menu ...................................... 20 Connecting the aerial and VCR ................. 3 Connecting the power cord to the AC outlet....................................................... 4 Putting the batteries into the Remote control..................................................... 4 Initial settings .........
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 3 Monday, February 21, 2005 10:08 AM Setting up your TV Caution • Turn off all the equipment including the TV before connecting anything. Connecting the aerial and VCR • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. Aerial If not connecting a VCR, follow 1.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 4 Monday, February 21, 2005 10:08 AM Setting up your TV Connecting the power cord to the AC outlet Caution • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. Initial settings When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the onscreen display to make the initial settings.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 5 Monday, February 21, 2005 10:08 AM Setting up your TV 2 Press the a button The LANGUAGE menu appears. LANGUAGE OK AUTO PROGRAM 3 Press the 5 and 6 buttons to choose ENGLISH. Then press the a button English is set for the on-screen display description. The COUNTRY menu appears as a sub-menu of the AUTO PROGRAM function. There are two COUNTRY menus.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 6 Monday, February 21, 2005 10:08 AM Setting up your TV 6 Press the a button to display the T-V LINK menu T-V LINK DOWNLOAD TV TV RECORDING DEVICE OK EXIT D0005-EN 7 If you do not have a T-V LINK compatible VCR connected: Press the b button to exit the T-V LINK menu. The T-V LINK menu disappears.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 7 Monday, February 21, 2005 10:08 AM Setting up your TV 2 When the settings are completed, the EDIT menu is displayed. Return to the instructions that you were reading before, and continue the operation When the “AUTO PROGRAM” has been made: Return to step 6 of “Initial settings” on page 4. • If you have any questions about the items in the Broadcast Selection menu or how to operate the menu, please contact your cable TV station.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 8 Monday, February 21, 2005 10:08 AM Setting up your TV T-V LINK FUNCTIONS When a T-V LINK compatible VCR is connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features: To use T-V LINK functions: A T-V LINK compatible VCR is necessary. The VCR must be connected to the EXT-2 terminal on the TV by a fully wired SCART cable.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 9 Monday, February 21, 2005 10:08 AM TV buttons and functions AV-32H50SU/AV-28H50SU AV-32H57SU ENGLISH EXT-1 S L P E L / MONO X T 4 R R EXT-2 EXT-3 AUDIO OUT S S P E L / MONO X T 4 R Refer to the pages in parentheses for details.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 10 Monday, February 21, 2005 10:08 AM TV buttons and functions Turn the Main power on Press the Main power button on the TV. The Power lamp lights red and your TV is in the standby mode. To turn the Main power off: Press the Main power button again. The Power lamp goes off. Caution • The main power button on the TV does not fully isolate the TV from the AC supply.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 11 Monday, February 21, 2005 10:08 AM Remote control buttons and functions 2 3 4 5 6 7 8 9 0 P TV AV MENU Muting button Number buttons c button i (hyper sound) button Information button b button 5 buttons # (standby) button Colour buttons a button 6 buttons VCR/DVD/Teletext control button VCR P DVD switch g (text) button ENGLISH 1 1 2 3 4 5 6 7 8 9 0 = ~ Turn the TV on or off from standby mode OK P F.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 12 Monday, February 21, 2005 10:08 AM Remote control buttons and functions Use the 6 buttons: Press the 6 buttons to choose the programme number (PR) you want. Use the PR LIST: 1 Press the h (Information) button to display the PR LIST Pressing the h (Information) button changes the display as follows: PR LIST PR AV 1 2 3 4 5 6 7 8 9 TV Use the o button: Press the o button to choose an EXT terminal.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 13 Monday, February 21, 2005 10:08 AM Remote control buttons and functions To return to a TV channel: Press the b button, the 6 buttons or the Number buttons. Press the h (Information) button to display the current time Pressing the h (Information) button changes the display as follows: PR LIST PR AV 1 2 3 4 5 6 7 8 9 EXT modes TV mode Programme numbers PR 1 – PR 99 You can display the Current Time on the screen.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 14 Monday, February 21, 2005 10:08 AM Remote control buttons and functions ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. AUTO: For any picture format except Normal Picture (4:3 Aspect Ratio), the picture will be automatically displayed in the optimum screen size.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 15 Monday, February 21, 2005 10:08 AM Remote control buttons and functions Adjusting the visible area of the picture If subtitles or the top (or bottom) of the picture are cut off, adjust the visible area of the picture manually. 2 Press the a button to display the ZOOM mode indication Indicator is displayed.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 16 Monday, February 21, 2005 10:08 AM Teletext function 0 P TV 4 Choose a teletext page by pressing the 6 buttons, Number buttons or Colour buttons AV To return to the TV mode: Press the b button or g (Text) button. MENU OK P F.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 17 Monday, February 21, 2005 10:08 AM Teletext function 3 Press and hold down A (Store) button The four page numbers blink white to indicate that they are stored in memory. To call up a stored page: Some teletext pages include hidden text (such as answers to a quiz). You can display the hidden text.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 18 Monday, February 21, 2005 10:08 AM Teletext function Cancel You can search for a teletext page while watching TV. 1 Press the Number button to enter a page number, or press a Colour button The TV searches for a teletext page. 2 Press H (Cancel) button The TV programme appears. When the TV finds the teletext page, its page number appears in the upper left of the screen.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 19 Monday, February 21, 2005 10:08 AM Using the TV’s menu This TV has a number of functions you can operate using menus. To fully utilize all your TV’s functions, you need to understand the basic menu operating techniques fully.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 20 Monday, February 21, 2005 10:08 AM PICTURE menu COLOUR PICTURE PICTURE MODE CONTRAST BRIGHT SHARP COLOUR HUE COLOUR TEMP. FEATURES TV SOFT NORMAL OK RESET D0014 -EN • While the PICTURE menu is displayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, HUE settings to their default settings. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 21 Monday, February 21, 2005 10:08 AM PICTURE menu COLOUR SYSTEM FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu. The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 22 Monday, February 21, 2005 10:08 AM PICTURE menu 4:3 AUTO ASPECT You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio). 1 Choose 4:3 AUTO ASPECT then press the a button 4:3 AUTO ASPECT PANORAMIC REGULAR 14:9 ZOOM TV OK D0017-EN 2 Press the 6 buttons to choose a ZOOM mode.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 23 Monday, February 21, 2005 10:08 AM SOUND menu BALANCE SOUND STEREO/ BASS TREBLE BALANCE HYPER SOUND TV OFF OK You can adjust the volume balance between the left and right speaker. 2 : turn the left speaker’s volume level up. 3 : turn the right speaker’s volume level up. D0019-EN When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II).
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 24 Monday, February 21, 2005 10:08 AM FEATURES menu To cancel the SLEEP TIMER function: Press the 2 button to set a period of time to “OFF”. FEATURES SLEEP TIMER CHILD LOCK BLUE BACK TV ON OK CHILD LOCK D0023-EN SLEEP TIMER You can set the TV to automatically turn off after a specified period of time. 1 Choose SLEEP TIMER, then press the a button A Sub-menu of the SLEEP TIMER function appears.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 25 Monday, February 21, 2005 10:08 AM FEATURES menu 3 Press the a button The Sub-menu of CHILD LOCK appears. CHILD LOCK TV ID CH/CC BBC1 CH CH CH CH CH CH CH CH CH OK 5 ID NO.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 26 Monday, February 21, 2005 10:08 AM FEATURES menu BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an external device. ON: This function is turned on. OFF: This function is turned off.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 27 Monday, February 21, 2005 10:08 AM SET UP menu EDIT/MANUAL SET UP AUTO PROGRAM EDIT/MANUAL LANGUAGE PICTURE TILT DECODER(EXT-2) EXT SETTING TV OFF OK D0029-EN AUTO PROGRAM Caution You can automatically register the TV channels which can be received well at your residence in the TV’s Programme numbers (PR) by performing the following. 1 Choose AUTO PROGRAM.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 28 Monday, February 21, 2005 10:08 AM SET UP menu ID: This function registers a Channel name (ID) to a TV channel. INSERT: This function adds a new TV channel in the current Programme numbers (PR) list by using the CH/CC number. • You cannot use the INSERT function if you do not know a Channel number of a TV channel. Use the MANUAL function to register a TV channel in the Programme number (PR).
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 30 Monday, February 21, 2005 10:08 AM SET UP menu 2 Press the green button and start the INSERT function. EDIT ID PR AV 1 2 3 4 5 6 7 8 9 TV BBC1 OK CH/CC CH 36 CH 21 CH 22 CH 23 CH 24 CH 25 CH CH 27 CH 28 CH 29 0-9 CH/CC D0034 -EN 3 Press the 6 buttons to choose “CC” or “CH” according to the CH/ CC number of the TV channel When the COUNTRY setting is FRANCE: Choose “CH1”, “CH2”, “CC1” or “CC2”.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 31 Monday, February 21, 2005 10:08 AM SET UP menu 4 Press the green or red button to search for a TV channel Scanning stops when the TV finds a TV channel. Then the TV channel is displayed. 5 Press the green or red button repeatedly until the TV channel you want appears If the TV channel reception is poor: Press the blue or yellow button to finetune the TV channel.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 32 Monday, February 21, 2005 10:08 AM SET UP menu DECODER (EXT-2) When connecting a Decoder with a T-V LINK compatible VCR connected to the EXT-2 terminal, use the DECODER (EXT2) function to unscramble the scrambled TV channels. 1 Turn on the Decoder power 2 Display the TV channel capable of being unscrambled with the Decoder on the TV Even if the Decoder is functioning, a scrambled picture appears at this time.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 33 Monday, February 21, 2005 10:08 AM SET UP menu 1 Choose an EXT terminal EXT SETTING 1 Choose EXT SETTING, then press the a or 3 button The EXT SETTING menu appears. EXT-1 DUBBING EXT-2 EXT-3 EXT-4 TV TV OK ID LIST S-IN To cancel the S-IN (S-VIDEO input) setting: Press the yellow button and turn off S-IN (S-VIDEO input) mark. The regular video signal (composite signal) pictures are resumed.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 34 Monday, February 21, 2005 10:08 AM SET UP menu ID LIST DUBBING You can have a name corresponding to the devices connected for each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with the name. 1 Choose an EXT terminal You can choose a signal source to be output from an EXT-2 terminal.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 35 Monday, February 21, 2005 10:08 AM SET UP menu TV: The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal. ENGLISH • During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 37 Monday, February 21, 2005 10:08 AM Additional preparation Devices which can output the SVIDEO signal (Y/C signal) such as a S-VHS VCR T-V LINK compatible VCR Be sure to connect the T-V LINK compatible VCR to the EXT-2 terminal. If not, the T-V LINK function will not work properly. • When connecting a T-V LINK compatible VCR to the EXT-2 terminal, be sure to connect the Decoder to the VCR.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 38 Monday, February 21, 2005 10:08 AM CH/CC numbers When you want to use the INSERT function on page 29, find the CH/CC number corresponding to the Channel number of the TV channel from this table.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 39 Monday, February 21, 2005 10:08 AM CH/CC numbers ENGLISH • When two CH/CC numbers correspond to one Channel number, choose either one according to the current COUNTRY setting. When the COUNTRY setting is other than FRANCE, choose a two-digit CH/CC number. When the COUNTRY setting is FRANCE, choose a three-digit CH/ CC number.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 40 Monday, February 21, 2005 10:08 AM Troubleshooting If a problem arises while you are using the TV, please read this “Troubleshooting” well before you request having the TV repaired. You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 41 Monday, February 21, 2005 10:08 AM Troubleshooting Poor sound • Have you adjusted BASS or TREBLE properly? If not, follow the description “BASS” or “TREBLE” on page 23. When the TV channel reception is poor, it can be hard to hear the stereo or bilingual sound. In this case, follow the description “STEREO / I • II” on page 23 to hear the sound more easily by changing it to a mono sound.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 42 Monday, February 21, 2005 10:08 AM Troubleshooting • If you bring a magnetised device such as a speaker near to your TV, a picture may be warped or unnatural colours appear at the corners of the screen. In this case, keep the device apart from your TV. If the speakers causes such phenomena, use the magnetic-shielded speakers instead. • A picture may be tilted due to the influence of the earth’s magnetism.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 43 Monday, February 21, 2005 10:08 AM Specifications Item Model AV-32H50SU AV-28H50SU CCIR B/G, I, D/K, L Colour systems PAL, SECAM • The EXT terminals also support the NTSC 3.58/4.43 MHz system.
AV-32/28H50/32H57SU / LCT1803-001A-U / English AV-32&28H50SU_Eng.book Page 44 Monday, February 21, 2005 10:08 AM Specifications Item Model AV-32H57SU Broadcasting systems CCIR B/G, I, D/K, L Colour systems PAL, SECAM • The EXT terminals also support the NTSC 3.58/4.43 MHz system.
AV-32/28H5SK / LCT1806-001A-U / All Cover AV-32&28H5SK_Eng.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 2 Wednesday, February 16, 2005 10:19 AM Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 3 Wednesday, February 16, 2005 10:19 AM How to move the TV When moving the TV, make sure that it is held by two people as shown in the illustration. Be careful not to trap your hands when putting the TV down.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 4 Wednesday, February 16, 2005 10:19 AM Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. • Avoid damaging the AC plug and power cord.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 5 Wednesday, February 16, 2005 10:19 AM CONTENTS Setting up your TV ...................................6 PICTURE menu ...................................... 22 Connecting the aerial and VCR ................. 6 Connecting the power cord to the AC outlet....................................................... 7 Putting the batteries into the remote control..................................................... 7 Initial settings ..............
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 6 Wednesday, February 16, 2005 10:19 AM Setting up your TV Caution • Turn off all the equipment including the TV before connecting anything. Connecting the aerial and VCR • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. If connecting a VCR, follow A → B → C. Aerial If not connecting a VCR, follow 1.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 7 Wednesday, February 16, 2005 10:19 AM Setting up your TV Connecting the power cord to the AC outlet Caution • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. Initial settings When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the onscreen display to make the initial settings.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 8 Wednesday, February 16, 2005 10:19 AM Setting up your TV 3 Press the a button to start the AUTO PROGRAM function The AUTO PROGRAM menu appears and received TV channels are automatically registered in the Programme numbers (PR). • To cancel the AUTO PROGRAM function: Press the b button.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 9 Wednesday, February 16, 2005 10:19 AM Setting up your TV • In some areas you may get TV reception from more than one transmitter, for example different ITV regions. In this case each TV channel could be set twice. If this happens, the first set of channels will have the stronger signal. If you want to delete the second set of channels, you will have to do it manually (see page 30).
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 10 Wednesday, February 16, 2005 10:19 AM Setting up your TV Downloading the data to VCR You can transmit the latest Programme numbers (PR) data to the VCR with the T-V LINK function. Caution • This only works when the T-V LINK compatible VCR is connected to the EXT-2 terminal. • This only works when the T-V LINK menu is displayed.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 11 Wednesday, February 16, 2005 10:19 AM Setting up your TV When “FEATURE NOT AVAILABLE” is displayed: If “FEATURE NOT AVAILABLE” is displayed, the download was not performed correctly. Before trying to download again, make sure: • The VCR power is turned on. • The VCR is T-V LINK compatible. • The VCR is connected to the EXT-2 terminal. • The SCART cable is fully wired.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 12 Wednesday, February 16, 2005 10:19 AM TV buttons and functions Turn the main power on Press the Main power button on the TV. The Power lamp lights red and your TV is in the standby mode. To turn the Main power off: Press the Main power button again. The Power lamp goes off. Caution • The main power button on the TV does not fully isolate the TV from the AC supply.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 13 Wednesday, February 16, 2005 10:19 AM Remote control buttons and functions 1 2 3 4 5 6 7 8 9 0 P TV AV MENU 1 2 3 4 5 6 7 8 9 0 = ~ Muting button Number buttons c button i (hyper sound) button Information button b button 5 buttons # (standby) button Colour buttons a button 6 buttons VCR/DVD/Teletext control button VCR P DVD switch g (text) button Turn the TV on or off from standby mode OK P F.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 14 Wednesday, February 16, 2005 10:19 AM Remote control buttons and functions Use the 6 buttons: Press the 6 buttons to choose the programme number (PR) you want. Use the PR LIST: 1 Press the h (Information) button to display the PR LIST Pressing the h (Information) button changes the display as follows: Watch images from external devices Use the o button: Press the o button to choose an EXT terminal.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 15 Wednesday, February 16, 2005 10:19 AM Remote control buttons and functions To return to a TV channel: Press the b button, the 6 buttons or the Number buttons. To use the Programme number PR 0 (AV): When the TV and VCR are connected only by the Aerial cable, choosing the Programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to the Programme number PR 0 (AV) manually.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 16 Wednesday, February 16, 2005 10:19 AM Remote control buttons and functions ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. AUTO: For any picture format except Normal Picture (4:3 Aspect Ratio), the picture will be automatically displayed in the optimum screen size.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 17 Wednesday, February 16, 2005 10:19 AM Remote control buttons and functions Adjusting the visible area of the picture If subtitles or the top (or bottom) of the picture are cut off, adjust the visible area of the picture manually. 1 Press the c button The ZOOM menu appears. 2 Press the a button to display the ZOOM mode indication Indicator is displayed.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 18 Wednesday, February 16, 2005 10:19 AM Teletext function 0 P TV 4 Choose a teletext page by pressing the 6 buttons, Number buttons or Colour buttons AV To return to the TV mode: Press the b button or g (Text) button. MENU OK P F.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 19 Wednesday, February 16, 2005 10:19 AM Teletext function 3 Press and hold down A (Store) button The four page numbers blink white to indicate that they are stored in memory. To call up a stored page: 1 Press the B button to engage the List mode Reveal Some teletext pages include hidden text (such as answers to a quiz). You can display the hidden text.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 20 Wednesday, February 16, 2005 10:19 AM Teletext function Cancel You can search for a teletext page while watching TV. 1 Press the Number button to enter a page number, or press a Colour button The TV searches for a teletext page. 2 Press H (Cancel) button The TV programme appears. When the TV finds the teletext page, its page number appears in the upper left of the screen.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 21 Wednesday, February 16, 2005 10:19 AM Using the TV’s menu This TV has a number of functions you can operate using menus. To fully utilize all your TV’s functions, you need to understand the basic menu operating techniques fully.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 22 Wednesday, February 16, 2005 10:19 AM PICTURE menu COLOUR PICTURE PICTURE MODE CONTRAST BRIGHT SHARP COLOUR HUE COLOUR TEMP. FEATURES TV SOFT NORMAL OK RESET D0014 -EN • While the PICTURE menu is displayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, HUE settings to their default settings. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 23 Wednesday, February 16, 2005 10:19 AM PICTURE menu COLOUR SYSTEM FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu. The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 24 Wednesday, February 16, 2005 10:19 AM PICTURE menu 4:3 AUTO ASPECT You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio). 1 Choose 4:3 AUTO ASPECT then press the a button 4:3 AUTO ASPECT PANORAMIC REGULAR 14:9 ZOOM TV OK D0017-EN 2 Press the 6 buttons to choose a ZOOM mode.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 25 Wednesday, February 16, 2005 10:19 AM SOUND menu BALANCE SOUND STEREO/ BASS TREBLE BALANCE HYPER SOUND TV OFF OK You can adjust the volume balance between the left and right speaker. 2 : turn the left speaker’s volume level up. 3 : turn the right speaker’s volume level up. D0019-EN STEREO / I • II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II).
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 26 Wednesday, February 16, 2005 10:19 AM FEATURES menu To cancel the SLEEP TIMER function: Press the 2 button to set a period of time to “OFF”. FEATURES SLEEP TIMER CHILD LOCK BLUE BACK TV ON OK CHILD LOCK D0023-EN SLEEP TIMER You can set the TV to automatically turn off after a specified period of time. 1 Choose SLEEP TIMER, then press the a button A Sub-menu of the SLEEP TIMER function appears.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 27 Wednesday, February 16, 2005 10:19 AM FEATURES menu 3 Press the a button The Sub-menu of CHILD LOCK appears. CHILD LOCK PR AV 1 2 3 4 5 6 7 8 9 TV ID CH BBC1 BBC2 ITV CH4 CH5 CH CH CH CH CH CH CH CH CH OK 2 Press the h (Information) button to display “ID NO.” (ID NO. input screen). 5 ID NO.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 28 Wednesday, February 16, 2005 10:19 AM FEATURES menu BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an external device. ON: This function is turned on. OFF: This function is turned off.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 29 Wednesday, February 16, 2005 10:19 AM SET UP menu Caution SET UP AUTO PROGRAM EDIT/MANUAL LANGUAGE PICTURE TILT DECODER(EXT-2) EXT SETTING TV OFF OK D0029-EN AUTO PROGRAM You can automatically register the TV channels which can be received well at your home in the TV’s Programme numbers (PR) by performing the following. To receive satellite broadcast you need a satellite tuner. 1 Choose AUTO PROGRAM.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 30 Wednesday, February 16, 2005 10:19 AM SET UP menu DELETE: This function deletes an unnecessary TV channel. MANUAL: This function manually registers a new TV channel in a Programme number (PR). 3 Press the a button to complete the settings The T-V LINK menu appears.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 31 Wednesday, February 16, 2005 10:19 AM SET UP menu ID 1 Press the 6 buttons to choose a TV channel Every time you press the 6 buttons, the Programme number (PR) is changed over, and the picture of the TV channel registered in the Programme number (PR) appears on the screen.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 32 Wednesday, February 16, 2005 10:19 AM SET UP menu 3 Press the Number buttons to enter the remaining CH number The TV shifts to registration mode. When the registration is completed, the picture of the TV channel appears on the screen. • The CH number tells the TV the broadcast frequency of channel. If the TV cannot detect a TV channel on that frequency, you will not be able to receive a picture for that channel.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 33 Wednesday, February 16, 2005 10:19 AM SET UP menu PICTURE TILT There are cases where the Earth’s magnetic force may make the picture tilt. If this happens, you can correct the picture tilt. 1 Press the 6 buttons to choose PICTURE TILT. Then press the a button PICTURE TILT 4 Press the 6 buttons to choose DECODER (EXT-2). Then press the 5 buttons to choose ON An unscrambled picture appears.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 34 Wednesday, February 16, 2005 10:19 AM SET UP menu 1 Choose an EXT terminal EXT SETTING 1 Choose EXT SETTING, then press the a or 3 button The EXT SETTING menu appears. EXT SETTING EXT-1 DUBBING EXT-2 EXT-3 EXT-4 TV TV OK ID LIST S-IN 2 Press the yellow button and set the S-IN (S-VIDEO input). Then press the a button An S-IN (S-VIDEO input) mark is displayed.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 35 Wednesday, February 16, 2005 10:19 AM SET UP menu ID LIST DUBBING You can have a name corresponding to the devices connected for each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with the name. 1 Choose an EXT terminal You can choose a signal source to be output from an EXT-2 terminal.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 36 Wednesday, February 16, 2005 10:19 AM SET UP menu TV: The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal. • During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 37 Wednesday, February 16, 2005 10:19 AM Additional preparation Connecting the external devices Connect the devices to the TV, paying attention to the following connection diagram. Before connecting anything: • Read the manuals provided with the devices. Depending on the devices, the connection method may differ from the figure. Also, depending on the connection method, you can change the device settings so that it works properly.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 38 Wednesday, February 16, 2005 10:19 AM Additional preparation Devices which can output the SVIDEO signal (Y/C signal) such as a S-VHS VCR Connect the device to an EXT terminal other than the EXT-1 terminal. You can choose a video input signal from the S-VIDEO signal (Y/C signal) and regular video signal (composite signal). For details of how to operate the device, see “S-IN (SVIDEO input)” on page 34.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 39 Wednesday, February 16, 2005 10:19 AM CH numbers When you want to use the INSERT function on page 31, find the CH number corresponding to the Channel number of the TV channel from this table.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 40 Wednesday, February 16, 2005 10:19 AM Troubleshooting If a problem arises while you are using the TV, please read this “Troubleshooting” guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 41 Wednesday, February 16, 2005 10:19 AM Troubleshooting • Have the COLOUR and BRIGHT settings been adjusted properly? Follow the description “BRIGHT” and “COLOUR” on page 22 to try to adjust them properly. • Videotaping teletext is not recommended because it may not record correctly. • When a white and bright still image (such as a white dress) is displayed on the screen, the white part may look as if it were coloured.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 42 Wednesday, February 16, 2005 10:19 AM Troubleshooting • If you bring a magnetised device such as a speaker near to your TV, a picture may be warped or unnatural colours appear at the corners of the screen. In this case, keep the device apart from your TV. If the speakers cause this to happen, use magnetic-shielded speakers instead. • A picture may be tilted due to the influence of the earth’s magnetism.
AV-32/28H5SK / LCT1806-001A-U / English AV-32&28H5SK_Eng.book Page 43 Wednesday, February 16, 2005 10:19 AM Specifications Item Model AV-32H5SK AV-28H5SK Broadcasting systems CCIR, I Colour systems PAL • The EXT terminals also support the NTSC 3.58/4.43 MHz system. Channels and frequencies E21-E69 Sound-multiplex systems NICAM ( I) system Teletext systems FLOF (Fastext), TOP, WST (World Standard System) Power requirements 220 - 240 V AC, 50 Hz Power consumption 130 W, Standby: 0.
AV-32/28H5SK / LCT1806-001A-U / All Cover AV-32&28H5SK_Eng.