LCD Flat Television Users Guide

Cable Holder

A cable holder which keeps your connection cables tidy is

attached on the back of the stand. To open, loosen the screws

with you fingers. After putting the cables in the cable holder,

attach it to the back of the stand again by tightening the screws

with your fingers.

Remove the terminal cover

There are connection terminals behind the cover on the left in the back

of the TV. Remove the cover before connecting an antenna or other

devices. The cover can be removed by removing the hooks. When

replacing the cover, place the side of the cover against the TV and

insert the hooks.

Note:

• Leave the terminal cover off if they do not fit properly. Do not force

to replace the cover. Doing so may damage the connection cables

and cover.

Quick Setup

No VCR Connection

TV Rear Panel

Cable or Antenna

Output

Coaxial Cable

(Attachment)

LCT2112-001A-A Eng.indd 13LCT2112-001A-A Eng.indd 13 3/31/06 9:21:37 AM3/31/06 9:21:37 AM