Projection Television Users Guide

ManualsBrandsJVC ManualsProjection TV1004KGI-II-IM

Initial Setup

The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a HDMI480p

picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when

a HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of

HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the

position can be adjusted by selecting either SIZE1 or SIZE2.

Press the M

ENU button

π†

To DIGITAL-IN

√®

To enter

√®

To select SIZE1 or SIZE2

Press the MENU button to finish

Note:

• The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal is

input to the Digital-In terminal and the picture is being displayed on the screen.

• Note: AV-65WP55 ONLY

Digital-In

INITIAL SETUP

SELECT OPERATE EXIT

(1/4)

DIGITAL-IN

DIGITAL-IN AUDIO

CENTER CH INPUT

SIZE1

DIGITAL

OFF

This feature is used if you have a DTV or HDMI compatible

component connected to your TV.

Press the MENU button

π†

To DIGITAL-IN AUDIO

√®

To select “ANALOG” or “DIGITAL”

Press the Menu button when ﬁ nished

Notes:

• If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. If

your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.

• Refer to your DTV or HDMI component’s instruction manual for more information.