MX1SEU_00.
Filename [MX1SEU_02Safety.fm] MX1SEU_00.book Page 2 Monday, December 6, 2004 2:01 PM 2 EN Masterpage:Left0 SAFETY FIRST Safety Precautions The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
Filename [MX1SEU_02Safety.fm] MX1SEU_00.book Page 3 Monday, December 6, 2004 2:01 PM Masterpage:Right+ SAFETY FIRST For Italy: AIt is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.’95 published in the Official Gazette of the Italian Republic n. 301 of 28 Dec.’95B The STANDBY/ON A button does not completely shut off mains power from the unit, but switches operating current on and off. ABB shows electrical power standby and ACB shows ON.
Filename [MX1SEU_03TOC.fm] Masterpage:Left0 MX1SEU_00.book Page 4 Monday, December 6, 2004 2:01 PM 4 EN CONTENTS SAFETY FIRST 2 Safety Precautions .........................................................................2 DISC INFORMATION 5 About Discs ....................................................................................5 TIMER RECORDING ON VHS DECK 54 b Timer Programming.................................................... 54 Manual Timer Programming .............................
Filename [MX1SEU_04DiscInfo.fm] MX1SEU_00.book Page 5 Monday, December 6, 2004 2:01 PM Masterpage:Right0 DISC INFORMATION About Discs Recordable/Playable Discs You can use discs with the following logos for recording and playback. DVD-RAM DVD-RW 12 cm: 4.7 GB/9.4 GB 8 cm: 1.4 GB/2.8 GB Ver. 2.0/2x speed Ver. 2.1/1x – 3x speed 12 cm: 4.7 GB/9.4 GB Ver. 1.1/1x – 2x speed (Video mode/VR mode) Ver. 1.2/4x speed (Video mode/VR mode) DVD-R 12 cm: 4.7 GB 8 cm: 1.4 GB Ver. 2.
Filename [MX1SEU_04DiscInfo.fm] MX1SEU_00.book Page 6 Monday, December 6, 2004 2:01 PM 6 EN DISC INFORMATION Discs For Playback Only Unplayable Discs You can use discs with the following logos for playback only. DVD VIDEO Masterpage:Left+ Video CD/Super Video CD (example of region code indications) Audio CD CD-DA files CD-R CD-DA/JPEG/ MP3 files CD-RW CD-ROM JPEG/MP3 files CD-DA/JPEG/ MP3 files ● Playback may not be performed depending on the characteristics and condition of the disc used.
Filename [MX1SEU_04DiscInfo.fm] Masterpage:Right+ MX1SEU_00.book Page 7 Monday, December 6, 2004 2:01 PM DISC INFORMATION Recording Medium And Format DVD-RAM ● Recording and erasing can be performed as many times as possible on a disc. ● Editing can be performed after recording, such as deleting unwanted parts. ● While recording, it is possible not only to start playback of a programme currently being recorded, but also to watch another programme previously recorded.
Filename [MX1SEU_04DiscInfo.fm] MX1SEU_00.book Page 8 Monday, December 6, 2004 2:01 PM 8 EN DISC INFORMATION DVD VIDEO Marks Masterpage:Left+ Placing A Disc Sometimes marks are printed on a DVD disc and/or on its packaging to indicate information regarding the contents and functions of the disc. Check the marks indicating the contents and functions of the disc. Note, however, that in some cases a disc may not include a mark even for a function it supports.
Filename [MX1SEU_04DiscInfo.fm] MX1SEU_00.book Page 9 Monday, December 6, 2004 2:01 PM Masterpage:Right+ DISC INFORMATION Care And Handling Of Discs How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may cause the unit to malfunction.
Filename [MX1SEU_05Name.fm] Masterpage:Left0 MX1SEU_00.book Page 10 Monday, December 6, 2004 2:01 PM 10 EN INDEX Front View A B C D VHS – HDD – E F G H I J VHS/HDD/DVD STANDBY/ ON SELECT S-VIDEO HDD/DVD VIDEO (MONO)L–AUDIO–R PR DVD – DISPLAY VHS DV IN REC MODE F–1 KL M HDD/DVD N O A Eject Button (M) (VHS) A pg. 41 B Cassette Loading Slot C VHS Lamp (VHS) A pg. 41 VHS Recording Lamp (R) A pg. 44 D HDD Lamp (HDD) A pg. 20, 37 HDD Recording Lamp (R) A pg.
Filename [MX1SEU_05Name.fm] Masterpage:Right+ MX1SEU_00.book Page 11 Monday, December 6, 2004 2:01 PM INDEX EN 11 Rear View A B C D HDD/DVD/VHS AUDIO OUT HDD/DVD L-1 Y LEFT PB RIGHT PR G F E IN/OUT OUT COMPONENT VIDEO OUT ANTENNA DIGITAL AUDIO OUT PCM/ STREAM OPTICAL SAT CONTROL HDD/DVD H A Region Number Label A pg. 6 B AC Power Cord A pg. 16 C Cooling Fan ● This prevents the temperature from rising inside the unit. Do not remove it.
Filename [MX1SEU_05Name.fm] Masterpage:Left+ MX1SEU_00.book Page 12 Monday, December 6, 2004 2:01 PM 12 EN INDEX Front Display Panel A B C D EF G H I J K L M N VPS/PDC LPCM FR XP SP LP EP VR +-RW VCD VHS HDD DVD -RAM O P Q R A VIDEO Indicator (z) A pg. 35, 38, 44 Lights when VIDEO mode is selected by pressing TV AV/ VIDEO. Lights off when TV mode is selected. B Disc Type Indicator When a disc is loaded, the type of the disc is indicated.
Filename [MX1SEU_05Name.fm] MX1SEU_00.
Filename [MX1SEU_05Name.fm] Masterpage:Left+ MX1SEU_00.book Page 14 Monday, December 6, 2004 2:01 PM 14 EN INDEX On-Screen Display (HDD & DVD deck) When ASUPERIMPOSEB is set to AAUTOB and ON SCREEN on the remote control is pressed, various operational indicators appear on the TV screen. To clear the operational indicators, press ON SCREEN twice. When pressing REC MODE (Appears for eight seconds.
Filename [MX1SEU_05Name.fm] Masterpage:Right+ MX1SEU_00.book Page 15 Monday, December 6, 2004 2:01 PM INDEX EN 15 On-Screen Display (DV Dubbing) On-Screen Display (VHS deck) When capturing images from the external DV equipment When AO.S.D.B is set to AAUTOB and ON SCREEN on the remote control is pressed, various operational indicators appear on the TV screen. To clear the operational indicators, press ON SCREEN again. HDD A B C D E F G H I J K 0:00 1:00 FR360 00:00:00.
Filename [MX1SEU_05Name.fm] Masterpage:Left0 MX1SEU_00.book Page 16 Monday, December 6, 2004 2:01 PM 16 EN INSTALLING YOUR NEW UNIT Basic Connections THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED. 1 2 3 To [ANTENNA IN] Mains power cord Back of unit To [AUDIO OUT] Audio cable (not supplied) To [L-1 IN/ OUT] To [COMPONENT VIDEO OUT (Y/PB/ PR)] To [ANTENNA OUT] Component video cable (not supplied) Place the unit on a stable, horizontal surface.
Filename [MX1SEU_05Name.fm] Masterpage:Right0 MX1SEU_00.book Page 17 Monday, December 6, 2004 2:01 PM INITIAL SETTINGS 3 Auto Set Up Auto Channel Set/Auto Clock Set/Auto Guide Programme Number Set Press FGD E to select the language of your choice, then press ENTER. The AUTO SET/ T-V LINK display appears on the TV screen.
Filename [MX1SEU_05Name.fm] Masterpage:Left+ MX1SEU_00.book Page 18 Monday, December 6, 2004 2:01 PM 18 EN INITIAL SETTINGS Preset Download Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Programme Number Set ATTENTION: You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable. * Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART cable.
Filename [MX1SEU_05Name.fm] Masterpage:Right+ MX1SEU_00.book Page 19 Monday, December 6, 2004 2:01 PM INITIAL SETTINGS Results Of Auto Set Up/Preset Download Appearing On The Front Display Panel If both Auto Channel Set and Auto Clock Set have been performed successfully, the correct current time is displayed. Turn on the TV and select its AV mode, then make sure that all necessary stations have been stored in the unit’s memory by using the PR +/– button(s). ● If station names (ID – A pg.
Filename [MX1SEU_05Name.fm] Masterpage:Left+ MX1SEU_00.book Page 20 Monday, December 6, 2004 2:01 PM 20 EN INITIAL SETTINGS On-screen Language Set Language This unit offers you the choice to view on-screen messages in 10 different languages. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. CABLE/SAT TV HDD DVD DVD 1 Press HDD or DVD so that the HDD or DVD lamp lights up on the unit. 2 3 4 Press SET UP to access the Main Menu screen.
Filename [MX1SEU_05Name.fm] Masterpage:Right+ MX1SEU_00.book Page 21 Monday, December 6, 2004 2:01 PM INITIAL SETTINGS Monitor Set You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. CABLE/SAT TV DVD DVD EN 1 2 Press DVD so that the DVD lamp lights up on the unit. 3 4 Press D E to select AFUNCTION SET UPB, then press G.
Filename [MX1SEU_05Name.fm] Masterpage:Left0 MX1SEU_00.book Page 22 Monday, December 6, 2004 2:01 PM 22 EN SAT CONTROL SET Satellite Receiver Control Setting (HDD & DVD Deck Only) Satellite receiver Your unit The following procedure is required if you receive satellite channels through a satellite receiver. Approximately 20 seconds before the a timer programming (A pg. 49) or Manual Timer programming (A pg.
Filename [MX1SEU_05Name.fm] MX1SEU_00.book Page 23 Monday, December 6, 2004 2:01 PM Masterpage:Right+ SAT CONTROL SET EN 23 12 Check the result of the test. If the satellite receiver’s channel number has been changed to the same one as you set in step 10 Press D E to select AYESB, then press ENTER to finish the Sat Control Set mode. If the satellite receiver’s channel number has not been changed correctly Press D E to select ANOB, then press ENTER. Then perform the procedure again from step 7.
Filename [MX1SEU_06DVD Operation.fm] Masterpage:Left0 MX1SEU_00.book Page 24 Monday, December 6, 2004 2:01 PM 24 EN BASIC OPERATIONS ON DVD DECK To play back an MP3/JPEG disc, see APlayback With MP3/WMA/ JPEG NavigationB (A pg. 63). Basic Playback 1 Load a disc. ● For details, refer to APlacing A DiscB (A pg. 8). ● Pressing I also closes the disc tray. ● Playback begins automatically if an auto-playback DVD disc is loaded. ● Turn on the unit. ● Turn on the TV and select the AV mode.
Filename [MX1SEU_06DVD Operation.fm] MX1SEU_00.book Page 25 Monday, December 6, 2004 2:01 PM Masterpage:Right+ BASIC OPERATIONS ON DVD DECK 25 Locating The Start Point Of The Item Or Skip The Item Playback Features ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press DVD so that the DVD lamp lights up on the unit. CABLE/SAT TV DVD EN Press S or T during playback.
Filename [MX1SEU_06DVD Operation.fm] Masterpage:Left+ MX1SEU_00.book Page 26 Monday, December 6, 2004 2:01 PM 26 EN BASIC OPERATIONS ON DVD DECK Still Picture/Frame-By-Frame Playback 1 2 Resume Function Press W to pause during playback. Press SLOW – (O) or SLOW + (N) to activate frame-byframe playback. ● Each press of SLOW – (O) or SLOW + (N) advances/ reverses the still picture frame by frame. ● Frame-by-frame playback for reverse direction cannot be performed with Video CD/SVCD discs.
Filename [MX1SEU_06DVD Operation.fm] Masterpage:Right+ MX1SEU_00.book Page 27 Monday, December 6, 2004 2:01 PM BASIC OPERATIONS ON DVD DECK CABLE/SAT TV EN 27 Checking The Time Information DVD DVD You can check time information of a disc on the front display panel and the TV screen.
Filename [MX1SEU_06DVD Operation.fm] Masterpage:Left+ MX1SEU_00.book Page 28 Monday, December 6, 2004 2:01 PM 28 EN BASIC OPERATIONS ON DVD DECK Subtitle Selection Audio Language/Sound Selection Some DVD VIDEO discs contain more than one subtitle language, from among which you can choose the desired subtitle language. AhB appears on the TV screen at the beginning of the part where more than one subtitle language are recorded. Some DVD VIDEO discs contain the multiple audio language or sound.
Filename [MX1SEU_06DVD Operation.fm] Masterpage:Right+ MX1SEU_00.book Page 29 Monday, December 6, 2004 2:01 PM BASIC OPERATIONS ON DVD DECK A B C D E F Using The On-screen Bar The on-screen bar allows you to control various playback functions. Some of the functions operated on Navigation Menu can be controlled on the On-screen bar. ATTENTION: The on-screen bar can also be used for the HDD deck. Be sure to clear Library Database Navigation screen by pressing NAVIGATION.
Filename [MX1SEU_06DVD Operation.fm] Masterpage:Left+ MX1SEU_00.book Page 30 Monday, December 6, 2004 2:01 PM 30 EN BASIC OPERATIONS ON DVD DECK To cancel A-B Repeat Playback Press D E to select AA-B xB, then press ENTER. DVD-RAM/RW/R OFF: NOTES: Repeat playback is not performed. ● A-B Repeat Playback may not work properly depending on the ALL REPEAT: type of disc being used. The whole disc is played back repeatedly. ● The subtitles recorded around the A-B point may not appear.
Filename [MX1SEU_06DVD Operation.fm] Masterpage:Right+ MX1SEU_00.book Page 31 Monday, December 6, 2004 2:01 PM BASIC OPERATIONS ON DVD DECK 31 Simulated Surround Effect CABLE/SAT TV EN DVD It is possible to get a simulated surround effect from your stereo system. You can enjoy the virtual surround sound with your 2channel stereo system. 0-9 1 2 CANCEL Press ON SCREEN twice to access the on-screen bar. Press D E to select A B, then press ENTER.
Filename [MX1SEU_06DVD Operation.fm] Masterpage:Left+ MX1SEU_00.book Page 32 Monday, December 6, 2004 2:01 PM 32 EN BASIC OPERATIONS ON DVD DECK Setting The Progressive Mode 4 You can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source). 1 2 3 Set the unit to the progressive scan mode. (A pg. 89) Press ON SCREEN twice to access the on-screen bar. Press D E to select A B, then press ENTER.
Filename [MX1SEU_06DVD Operation.fm] Masterpage:Right+ MX1SEU_00.book Page 33 Monday, December 6, 2004 2:01 PM BASIC OPERATIONS ON DVD DECK Parental Lock EN 8 Press F G to select your country code, then press ENTER. 9 Press the number keys to enter the same password as in step 6 above, then press ENTER. 33 ● If you do not need to change your country code, jump to 10. ● See ACountry/Area Code List for Parental LockB (A pg. 96).
Filename [MX1SEU_06DVD Operation.fm] Masterpage:Left+ MX1SEU_00.book Page 34 Monday, December 6, 2004 2:01 PM 34 EN BASIC OPERATIONS ON DVD DECK 7 Basic Recording stop recording. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ATTENTION: It is not possible to record programmes on a DVD-R disc which has already been finalised.
Filename [MX1SEU_06DVD Operation.fm] Masterpage:Right+ MX1SEU_00.book Page 35 Monday, December 6, 2004 2:01 PM BASIC OPERATIONS ON DVD DECK EN 35 Instant Timer Recording (ITR) Recording Features This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-minutes interval), and shuts the unit off after recording is finished. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD.
Filename [MX1SEU_06DVD Operation.fm] MX1SEU_00.book Page 36 Monday, December 6, 2004 2:01 PM Masterpage:Left+ 36 EN BASIC OPERATIONS ON DVD DECK Free Rate Function Receiving Stereo And Bilingual Programmes To record the entire programme, the unit automatically sets the appropriate recording mode depending on the combination of the total time of the programme to be recorded and either the remaining disc space or the specified recording time (from 60 minutes to 480 minutes).
Filename [MX1SEU_07HDD Operation.fm] Masterpage:Right0 MX1SEU_00.book Page 37 Monday, December 6, 2004 2:01 PM BASIC OPERATIONS ON HDD DECK ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ATTENTION: The HDD on the unit requires approximately 20 seconds to start up after the unit has been turned on, during which no operation can be made. VHS/HDD/DVD SELECT Recording Mode MPEG2 format is used as recording format.
Filename [MX1SEU_07HDD Operation.fm] Masterpage:Left+ MX1SEU_00.book Page 38 Monday, December 6, 2004 2:01 PM 38 EN BASIC OPERATIONS ON HDD DECK Watch Another Programme While Recording On The Unit Recording Features While recording is going on, you can watch another programme on the TV by using the TV’s tuner. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD.
Filename [MX1SEU_07HDD Operation.fm] Masterpage:Right+ MX1SEU_00.book Page 39 Monday, December 6, 2004 2:01 PM BASIC OPERATIONS ON HDD DECK Basic Playback EN 39 Playback Features ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press HDD so that the HDD lamp lights up on the unit.
Filename [MX1SEU_07HDD Operation.fm] Masterpage:Left+ MX1SEU_00.book Page 40 Monday, December 6, 2004 2:01 PM 40 EN BASIC OPERATIONS ON HDD DECK One Touch Replay Marking Positions To Play Back Again Later You can move back the playback position slightly. Press w. ● Each press skips back for approximately 7 seconds and resumes playback. ● Pressing while paused skips back for approximately 7 seconds and resumes pause. 1.
Filename [MX1SEU_08VHS Operation.fm] Masterpage:Right0 MX1SEU_00.book Page 41 Monday, December 6, 2004 2:01 PM BASIC OPERATIONS ON VHS DECK EN 41 1 Load a cassette. Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the unit. ● Do not apply too much pressure when inserting. ● If the record safety tab has been removed, playback begins automatically. However, when APOWER SAVEB is set to AONB (A pg.
Filename [MX1SEU_08VHS Operation.fm] MX1SEU_00.book Page 42 Monday, December 6, 2004 2:01 PM 42 EN Masterpage:Left+ BASIC OPERATIONS ON VHS DECK Variable Speed Search Playback Features ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS on the remote so that the VHS lamp lights up on the unit.
Filename [MX1SEU_08VHS Operation.fm] Masterpage:Right+ MX1SEU_00.book Page 43 Monday, December 6, 2004 2:01 PM BASIC OPERATIONS ON VHS DECK EN Next Function Memory Soundtrack Selection The Next Function Memory AtellsB the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode. Your unit is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select. For Automatic Start Of Playback Press O, then press I within 2 seconds.
Filename [MX1SEU_08VHS Operation.fm] Masterpage:Left+ MX1SEU_00.book Page 44 Monday, December 6, 2004 2:01 PM 44 EN BASIC OPERATIONS ON VHS DECK Basic Recording Recording Features ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. on the remote so that the VHS lamp lights up on the unit.
Filename [MX1SEU_08VHS Operation.fm] MX1SEU_00.book Page 45 Monday, December 6, 2004 2:01 PM Masterpage:Right+ BASIC OPERATIONS ON VHS DECK Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-minutes interval), and shuts the unit off after recording is finished. 1 2 Press R on the unit to start recording. 3 If you want to record for more than 30 minutes, press R to extend the time. Each press extends recording time by 30 minutes.
Filename [MX1SEU_09Live Memory.fm] Masterpage:Left0 MX1SEU_00.book Page 46 Monday, December 6, 2004 2:01 PM 46 EN LIVE MEMORY PLAYBACK ON HDD/DVD DECK Recording/playback Status Display Live Memory Playback CABLE/SAT TV DVD ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press DV/HDD/DVD on the unit repeatedly to select the HDD or DVD deck.
Filename [MX1SEU_09Live Memory.fm] MX1SEU_00.book Page 47 Monday, December 6, 2004 2:01 PM Masterpage:Right+ LIVE MEMORY PLAYBACK ON HDD/DVD DECK Buttons To Be Used During Live Memory Playback ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press HDD or DVD to select the desired deck for Live Memory Playback. CABLE/SAT TV HDD DVD DVD A B C D E G F H K L I J M A LIVE Returns to on air programme screen.
Filename [MX1SEU_09Live Memory.fm] Masterpage:Left+ MX1SEU_00.book Page 48 Monday, December 6, 2004 2:01 PM 48 EN LIVE MEMORY PLAYBACK ON HDD/DVD DECK Temporary recording for Live Memory (HDD deck only) Simultaneous Recording and Playback This unit automatically records the channel being received, within the specified range of time, to the reserved space on the hard disc. The time range can be set for 30 minutes, 1 hour, and 3 hours. (A pg.
Filename [MX1SEU_10Timer Recording.fm] Masterpage:Right0 MX1SEU_00.book Page 49 Monday, December 6, 2004 2:01 PM TIMER RECORDING ON HDD/DVD DECK 49 7 c Timer Programming You can programme this unit to timer-record as many as 16 programmes. With the a system, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognise. You can use the remote control to enter the a number.
Filename [MX1SEU_10Timer Recording.fm] Masterpage:Left+ MX1SEU_00.book Page 50 Monday, December 6, 2004 2:01 PM 50 EN TIMER RECORDING ON HDD/DVD DECK Weekly/Daily Recording VPS/PDC Recording You can record programmes with one of the following weekly/daily timer settings. For the HDD deck When you select a mode other than ONCE, the space on the hard disk drive is saved for new recordings by overwriting previous recordings.
Filename [MX1SEU_10Timer Recording.fm] Masterpage:Right+ MX1SEU_00.book Page 51 Monday, December 6, 2004 2:01 PM TIMER RECORDING ON HDD/DVD DECK 8 Manual Timer Programming You can programme this unit to timer-record as many as 16 programmes. If you do not know the a number for the programme you wish to record, use the following procedure to set your unit to timer-record the programme. ● Make sure that the unit’s built-in clock is set properly. ● Turn on the unit. ● Turn on the TV and select the AV mode.
Filename [MX1SEU_10Timer Recording.fm] Masterpage:Left+ MX1SEU_00.book Page 52 Monday, December 6, 2004 2:01 PM 52 EN TIMER RECORDING ON HDD/DVD DECK CABLE/SAT TV DVD Check Programmes To check the whole list of programmes 1 2 PROGRAMME Press PROGRAMME to access the programme top screen. Press FGD E to select APROGRAMME LISTB, then press ENTER. ● The details of a selected programme appear on the top of the screen. ● The daily programme of a title is listed as one programme.
Filename [MX1SEU_10Timer Recording.fm] Masterpage:Right+ MX1SEU_00.book Page 53 Monday, December 6, 2004 2:01 PM TIMER RECORDING ON HDD/DVD DECK Automatic Satellite Programme Recording (HDD Deck Only) This function allows you to automatically record a satellite programme which is timer-programmed on your external satellite receiver. Connect a satellite receiver to the unit’s [L-2 IN/ DECODER] connector and programme the timer on the satellite receiver.
Filename [MX1SEU_10Timer Recording.fm] Masterpage:Left0 MX1SEU_00.book Page 54 Monday, December 6, 2004 2:01 PM 54 EN TIMER RECORDING ON VHS DECK b Timer Programming You can programme this unit to timer-record as many as 8 programmes. With the a system, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognise. You can use the remote control to enter the a number. ● Make sure that the unit’s built-in clock is set properly.
Filename [MX1SEU_10Timer Recording.fm] Masterpage:Right+ MX1SEU_00.book Page 55 Monday, December 6, 2004 2:01 PM TIMER RECORDING ON VHS DECK You can programme this unit to timer-record as many as 8 programmes. If you do not know the a number for the programme you wish to record, use the following procedure to set your unit to timer-record the programme. ● Make sure that the unit’s built-in clock is set properly. ● Turn on the unit. ● Turn on the TV and select the AV mode.
Filename [MX1SEU_10Timer Recording.fm] Masterpage:Left+ MX1SEU_00.book Page 56 Monday, December 6, 2004 2:01 PM 56 EN TIMER RECORDING ON VHS DECK When Programmes Overlap Each Other CABLE/SAT TV VHS If APROGRAM OVERLAPPEDB appears, you have another programme overlapping the programme you have just made. The Programme Check screen appears and conflicting programmes will start blinking.
Filename [MX1SEU_11Navigation.fm] MX1SEU_00.book Page 57 Monday, December 6, 2004 2:01 PM Masterpage:Right0 NAVIGATION ON HDD/DVD DECK The Library Database Navigation enables you to search and select the desired titles recorded on the HDD deck and the DVD deck very easily. You can record up to 99 titles on a disc. Each time a title is recorded, the information of the title is registered for the Library Database Navigation automatically.
Filename [MX1SEU_11Navigation.fm] Masterpage:Left+ MX1SEU_00.book Page 58 Monday, December 6, 2004 2:01 PM 58 EN NAVIGATION ON HDD/DVD DECK Scan For Beginning Of Title Edit Original Information ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press HDD or DVD to choose the corresponding deck. ● Load a DVD disc to scan. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press HDD or DVD to choose the corresponding deck.
Filename [MX1SEU_11Navigation.fm] Masterpage:Right+ MX1SEU_00.book Page 59 Monday, December 6, 2004 2:01 PM NAVIGATION ON HDD/DVD DECK Modify Category Perform steps 1 – 4 of AModify IndexB (A pg. 58) before continuing. 2 3 Press FGD E to select ACATEGORYB, then press ENTER. 4 Press EDIT to return to the normal screen. You can delete unwanted part of the title. EDITING > MODIFY CATEGORY 0026 [FISH WORLD ] 64 MIN PR.
Filename [MX1SEU_11Navigation.fm] Masterpage:Left+ MX1SEU_00.book Page 60 Monday, December 6, 2004 2:01 PM 60 EN NAVIGATION ON HDD/DVD DECK Divide Title (HDD deck only) 1 2 3 4 Edit Play List Information Press EDIT. The Editing screen appears. Press FGD E to select ADIVIDEB, then press ENTER. Press FGD E to select a title to divide, then press ENTER. Press I, and press O or N to locate a point to divide, then press W. 5 Confirm the arrow is on ADIVIDEB, then press ENTER at the dividing point.
Filename [MX1SEU_11Navigation.fm] Masterpage:Right+ MX1SEU_00.book Page 61 Monday, December 6, 2004 2:01 PM NAVIGATION ON HDD/DVD DECK EN Create Play List Add scenes 1 2 1 Perform steps 1 – 5 in AEdit ScenesB (A pg. 61) before continuing. 2 3 Press FGD E to select ASEL. TITLEB, then press ENTER. Press FGD E to select ACREATEB, then press ENTER. Press FGD E to select a title that includes scenes to be included in a play list, then press ENTER.
Filename [MX1SEU_11Navigation.fm] Masterpage:Left+ MX1SEU_00.book Page 62 Monday, December 6, 2004 2:01 PM 62 EN NAVIGATION ON HDD/DVD DECK Delete Play List 1 2 3 Edit Library Information Press EDIT. The Editing screen appears. (DVD deck only) Press FGD E to select AMODIFYB under AORIGINAL/PLAY LISTB, then press ENTER. Press FGD E to select ADELETEB under APLAY LISTB, then press ENTER. 4 Press FGD E to select one play list you want to delete, then press ENTER.
Filename [MX1SEU_11Navigation.fm] Masterpage:Right+ MX1SEU_00.book Page 63 Monday, December 6, 2004 2:01 PM NAVIGATION ON HDD/DVD DECK Playback With MP3/WMA/JPEG Navigation This unit can play back discs that MP3/WMA sound files and JPEG image files taken with digital still cameras or other devices are recorded. The MP3/WMA/JPEG Navigation enables you to search and select the desired files recorded on CD-R/RW or CD-ROM discs very easily. ● Turn on the TV and select the AV mode.
Filename [MX1SEU_12Editing.fm] Masterpage:Left0 MX1SEU_00.book Page 64 Monday, December 6, 2004 2:01 PM 64 EN EDITING 5 Dubbing ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. CABLE/SAT TV HDD VHS DVD DVD MARK rtwe 4 7 8 9 ON SCREEN AUDIO NOTES: ● It is not possible to dub simultaneously when timer programming is set. Select either dubbing or timer programming.
Filename [MX1SEU_12Editing.fm] Masterpage:Right+ MX1SEU_00.book Page 65 Monday, December 6, 2004 2:01 PM EDITING EN 65 Dubbing From HDD To VHS Dubbing From DVD To VHS It is possible to perform dubbing from the HDD deck to the VHS deck. It is possible to perform dubbing from the DVD deck to the VHS deck. 1 2 3 4 Load a cassette with the record safety tab intact. 1 Load the disc you want to dub onto the DVD deck, and a cassette with the record safety tab intact to the VHS deck.
Filename [MX1SEU_12Editing.fm] Masterpage:Left+ MX1SEU_00.book Page 66 Monday, December 6, 2004 2:01 PM 66 EN EDITING Dubbing From VHS To HDD (Dubbing An Entire Cassette) 11 Press D E to select AEXECUTEB, then press ENTER for It is possible to perform automatic dubbing of all the recorded programmes of a cassette from the VHS deck to the HDD deck using the AENTIREB dubbing. 12 Upon completing dubbing, the tape stops and ADUBBING confirmation.
Filename [MX1SEU_12Editing.fm] Masterpage:Right+ MX1SEU_00.book Page 67 Monday, December 6, 2004 2:01 PM EDITING Dubbing From VHS To DVD (Dubbing A Programme From Cassette) It is possible to dub a single title (programme) of a cassette from the VHS deck to the DVD deck using the A1 PROG.B dubbing. 1 Load the cassette you want to dub. 2 3 4 5 Press DUBBING to access the Dubbing Menu screen. 6 Press G to select ACONFIRMB, then press ENTER. The confirmation screen appears.
Filename [MX1SEU_12Editing.fm] Masterpage:Left+ MX1SEU_00.book Page 68 Monday, December 6, 2004 2:01 PM 68 EN EDITING DV Dubbing (HDD & DVD Deck Only) The following on-screen display for DV dubbing appears when ON SCREEN is pressed while the channel has been set to ADVB. You can dub programmes from a camcorder or DV equipment connected to the unit with a DV cable. The unit’s remote control allows you the limited control of the connected camcorder or DV equipment functions during dubbing.
Filename [MX1SEU_12Editing.fm] MX1SEU_00.book Page 69 Monday, December 6, 2004 2:01 PM Masterpage:Right+ EDITING EN 69 12 Press o twice on the remote control to stop dubbing. ● Both the unit and the external DV equipment stop dubbing. NOTES: ● Dubbing copyright guarded programmes is not possible. ● Original DV information such as the recording date and time are not recorded. ● The superimposed indication during the operation or dubbing is not recorded.
Filename [MX1SEU_12Editing.fm] Masterpage:Left+ MX1SEU_00.book Page 70 Monday, December 6, 2004 2:01 PM 70 EN EDITING Edit From A Camcorder ● Slide the TV/CABLE/SAT/DVD switch to DVD. You can use a camcorder as the source player and your unit as the recording deck. A If the camcorder has no S-VIDEO output connector: To [VIDEO/AUDIO ((MONO) L/R)] input Recorder Audio/video cable (not supplied) 1 Make connections.
Filename [MX1SEU_12Editing.fm] Masterpage:Right+ MX1SEU_00.book Page 71 Monday, December 6, 2004 2:01 PM EDITING Edit To Or From Another Recorder You can use your unit as the source player or as the recording deck. NOTE: When using another recorder as the recording deck, refer to its instruction manual. A When using your unit as the source player TV receiver Player Your unit 21-pin SCART cable (supplied) 21-pin SCART cable (not supplied) 71 ● Slide the TV/CABLE/SAT/DVD switch to DVD.
Filename [MX1SEU_12Editing.fm] Masterpage:Left+ MX1SEU_00.book Page 72 Monday, December 6, 2004 2:01 PM 72 EN EDITING SCART RGB: Output/Input Set If a connected appliance’s input is compatible with RGB signals, set to ASCART RGBB. You can obtain a high-quality RGB picture. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. COMPONENT: If a connected appliance’s input is compatible with Y/PB/PR signals, set to ACOMPONENTB.
Filename [MX1SEU_12Editing.fm] Masterpage:Right+ MX1SEU_00.book Page 73 Monday, December 6, 2004 2:01 PM EDITING SAT S-VIDEO: If a connected satellite receiver’s output is compatible with Y/C signals, set to ASAT S-VIDEOB. You can obtain a high-quality S-VHS picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.) DECODER: To use a decoder connected to the [L-2 IN/DECODER] connector.
Filename [MX1SEU_12Editing.fm] Masterpage:Left0 MX1SEU_00.book Page 74 Monday, December 6, 2004 2:01 PM 74 EN REMOTE CONTROL Remote Control Functions CABLE/SAT TV TV AV /VIDEO TV Remote Control 1/2/3/4 Code Switching The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of four codes (1, 2, 3 or 4). The remote control is preset to send 3 code signals because your unit is initially set to respond to 3 code signals.
Filename [MX1SEU_12Editing.fm] Masterpage:Right+ MX1SEU_00.
Filename [MX1SEU_12Editing.fm] Masterpage:Left0 MX1SEU_00.book Page 76 Monday, December 6, 2004 2:01 PM 76 EN SYSTEM CONNECTIONS Connecting To A Satellite Receiver Simple Connections This is an example of a simple connection if your TV has one 21-pin AV input (SCART) connector. Connect the satellite receiver to the [L-2 IN/DECODER] connector, then connect the [L-1 IN/OUT] connector to the TV’s connector. NOTES: ● Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg.
Filename [MX1SEU_12Editing.fm] Masterpage:Right+ MX1SEU_00.book Page 77 Monday, December 6, 2004 2:01 PM SYSTEM CONNECTIONS Connecting To A Dolby Digital Decoder Or An Amplifier With Built-in DTS These instructions enable you to connect your unit to a Dolby Digital Decoder or an amplifier with built-in DTS.
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Left0 MX1SEU_00.book Page 78 Monday, December 6, 2004 2:01 PM 78 EN SUBSIDIARY SETTINGS * The boldface settings below indicate the settings at your purchase. Mode Set (HDD & DVD Deck Only) AUDIO OUTPUT 8 DIGITAL AUDIO OUT ^ DOLBY DIGITAL/PCM / STREAM/ PCM / PCM ONLY Set to the appropriate mode according to the type of the device connected to [DIGITAL AUDIO OUT] connector. ● Turn on the unit. ● Turn on the TV and select the AV mode.
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Right+ MX1SEU_00.book Page 79 Monday, December 6, 2004 2:01 PM SUBSIDIARY SETTINGS EN DISC PLAY SET UP REC/PLAY SET UP 8 RESUME ^ OFF / ON / DISC RESUME 8 XP MODE REC AUDIO ^ DOLBY DIGITAL / LINEAR PCM When this function is set to AONB or ADISC RESUMEB, you can use the resume function. (A pg. 26) OFF: You cannot use the resume function. ON: You can start playback from the resume point of the placed disc.
Filename [MX1SEU_13Subsidiary.fm] MX1SEU_00.book Page 80 Monday, December 6, 2004 2:01 PM 80 EN SUBSIDIARY SETTINGS DISPLAY SET 8 SUPERIMPOSE ^ OFF / AUTO When this function is set to AAUTOB, various operational indicators appear on the TV screen. Messages appear in the selected language. (A pg. 20) OFF: To turn off superimposed indications. AUTO: To superimpose operational indications for approximately five seconds just after the corresponding operation.
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Right+ MX1SEU_00.book Page 81 Monday, December 6, 2004 2:01 PM SUBSIDIARY SETTINGS Mode Set (VHS Deck Only) 81 8 B.E.S.T. ^ ON / OFF You can set the B.E.S.T. (Biconditional Equalised Signal Tracking) system to AONB or AOFFB. (A pg. 45) NOTES: ● When watching a tape recorded with AB.E.S.T.B set to AONB, it is recommended that you leave B.E.S.T. on during playback as well.
Filename [MX1SEU_13Subsidiary.fm] MX1SEU_00.book Page 82 Monday, December 6, 2004 2:01 PM 82 EN Masterpage:Left+ SUBSIDIARY SETTINGS 8 AUTO SPNLP TIMER ^ ON / OFF When this function is set to AONB, the unit automatically switches to LP mode to allow complete recording if there is not enough tape to record the entire programme while timer-recording in SP mode. For Example: Recording a programme of 140 minutes in length onto a 120minute tape.
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Right+ MX1SEU_00.book Page 83 Monday, December 6, 2004 2:01 PM SUBSIDIARY SETTINGS c System Setup EN 83 Tuner Set IMPORTANT: Normally, Auto Set Up (A pg. 17), Preset Download (A pg. 18) or Auto Channel Set (A pg. 83) sets the Guide Programme numbers automatically. You need to set the Guide Programme numbers manually only in the following cases.
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Left+ MX1SEU_00.book Page 84 Monday, December 6, 2004 2:01 PM 84 EN SUBSIDIARY SETTINGS 8 View the Confirmation screen. AAUTO SET COMPLETEDB or ASCAN COMPLETEDB is displayed on the TV screen. ● After selecting AOKB, APLEASE WAIT...B appears on the screen while channel data is being transferred to the VHS deck. During this period (approximately 80 seconds), the VHS deck is not operable. It will exit the AUTO SET mode once APLEASE WAIT...
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Right+ MX1SEU_00.book Page 85 Monday, December 6, 2004 2:01 PM SUBSIDIARY SETTINGS Delete A Channel Set Stations (A) 1 2 3 Perform steps 1 – 5 of AManual Channel SetB (A pg. 84). Set station names that are registered in your unit. 4 Press SET UP or RETURN to close the Confirmation screen. Press FGD E to select the channel you want to delete. Press CANCEL(L) to delete a channel. The channel next to the cancelled one moves up one line.
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Left+ MX1SEU_00.book Page 86 Monday, December 6, 2004 2:01 PM 86 EN SUBSIDIARY SETTINGS 6 Clock Set IMPORTANT: If you performed Auto Set Up (A pg. 17) or Preset Download (A pg. 18), without ever having set the clock previously, the unit’s built-in clock is also set automatically. Perform the following steps only if ^ ^ Auto Clock Set has not been performed correctly by Auto Set Up or Preset Download. OR ^ you want to change Just Clock setting.
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Right+ MX1SEU_00.book Page 87 Monday, December 6, 2004 2:01 PM SUBSIDIARY SETTINGS Format A Disc (DVD Deck Only) Some DVD-RAM/RW discs are unformatted. Format the disc when you use an unformatted disc or you want to delete all recordings and data on the disc. ATTENTION: ● When a disc is formatted, all recordings and data are erased. It is impossible to restore them. ● Never turn off the unit or disconnect the mains power cord while ANOW FORMATTING...
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Left+ MX1SEU_00.book Page 88 Monday, December 6, 2004 2:01 PM 88 EN SUBSIDIARY SETTINGS Finalise A Disc (DVD Deck Only) Finalising DVD-R/RW discs recorded on this unit makes it possible for the discs to be played back on other DVD players. DVD-RW discs are finalised in the mode that the discs were formatted, enabling playback on compatible DVD players. Title names input in the Library Database Navigation are registered as title names in the DVD menu. (A pg.
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Right+ MX1SEU_00.book Page 89 Monday, December 6, 2004 2:01 PM SUBSIDIARY SETTINGS Scan Mode Set If you connect the unit and TV with Component Video Connection (A pg. 16), you can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressive scan mode which enables reproduction of higher-quality images.
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Left0 MX1SEU_00.book Page 90 Monday, December 6, 2004 2:01 PM 90 EN TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can solve the trouble yourself. Small problems are often easily solved, and this can save you the trouble of sending your unit off for repair. Initialising (DVD Deck Only) Malfunction occurs on the unit. N Press A to turn off the unit, press and hold A, then press o for two seconds or more.
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Right+ MX1SEU_00.book Page 91 Monday, December 6, 2004 2:01 PM TROUBLESHOOTING Playback (VHS Deck) TV broadcasts cannot be recorded. ● ● The tape will not rewind or fast-forward. ● The tape is already fully rewound or fast-forwarded. N Check the cassette. The playback picture does not appear while the tape is running. 91 Recording (HDD Deck) The VHS deck cannot be operated. The VHS deck is not selected.
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Left+ MX1SEU_00.book Page 92 Monday, December 6, 2004 2:01 PM 92 EN TROUBLESHOOTING Automatic Satellite Programme Recording does not start. ● Other Problems The satellite receiver is not connected properly to this unit. N Connect the satellite receiver to the [L-2 IN/DECODER] connector properly. (A pg. 53) The image of the TV broadcast appears distorted on the TV screen. On the front display panel, A– –:– –B appears.
Filename [MX1SEU_13Subsidiary.fm] MX1SEU_00.book Page 93 Monday, December 6, 2004 2:01 PM Masterpage:Right+ TROUBLESHOOTING On-screen Message (HDD & DVD Deck Only) DISC NOT REGISTERED IN THE LIBRARY REGISTER DISC? ● A disc that is not registered in the library has been inserted. Register the disc as necessary. (A pg. 62) INSERT DISC XXXX ● Appears when a title that has been selected in the library is not contained in the loaded disc.
Filename [MX1SEU_13Subsidiary.fm] MX1SEU_00.book Page 94 Monday, December 6, 2004 2:01 PM 94 EN Masterpage:Left0 SPECIFICATIONS GENERAL VIDEO/AUDIO (VHS Deck) Power requirement AC 220 V - 240 VH, 50 Hz/60 Hz Signal system PAL colour signal and CCIR monochrome signal, 625 lines/50 fields Power consumption Power on: 47 W Power off: 16.
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Right0 MX1SEU_00.
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Left+ 3Column MX1SEU_00.
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Right 3Column MX1SEU_00.
Filename [MX1SEU_13Subsidiary.fm] Masterpage:Left+ 3Column MX1SEU_00.book Page 98 Monday, December 6, 2004 2:01 PM 98 EN APPENDIX TV Station And ID List The AIDB abbreviation is what is shown on-screen in lieu of the station name. The AIDB abbreviation is listed in the Confirmation screen and is displayed on the TV screen when the unit is tuned to a different station.
Filename [MX1SEU_14IX.fm] Masterpage:Right0 MX1SEU_00.book Page 99 Monday, December 6, 2004 2:01 PM LIST OF TERMS EN 99 A P A-B Repeat Playback ................................................ 30 Accidental erasure prevention .................................... 45 Adjusting The Picture Quality ..................................... 31 Angle Selection ........................................................ 27 Audio Channel Selection ...........................................
MX1SEU_00.