INTRODUCTION CONNECTION LCD Television Built-in DVD Player Users Guide INITIAL SETTING LT-32DM20 32" class (31.5" Diagonal) WATCHING TV OPTIONAL SETTING HIGH-DEFINITION TELEVISION OPERATING DVD SETTING DVD TROUBLESHOOTING Important Note: Model No: Serial Number: 0808TKH-FU-FU INFORMATION In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide.
INTRODUCTION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. SHOCK, DO NOT REMOVE COVER (OR BACK).
INTRODUCTION 5 Precautions Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
INTRODUCTION LOCATION For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
INTRODUCTION 5 Features TV • Dolby Digital Sound - Enjoy Dolby Digital multi-channel surround sound when you connect the unit to your Dolby Digital decoder. • Still / Fast / Slow / Step Playback - Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames. • DVD Menus in a Desired Language - You can display DVD menus in a desired language, if available on a DVD-video.
INTRODUCTION 5 Contents INTRODUCTION Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 5 Remote Control Function 1. 2. 16 17 18 19 2 3. 20 5. 3 21 4 5 6 7 22 23 8 24 11 13 9 26 12 28 14 30 25 27 29 31 7. 8. 9. 10. 12. SETTING DVD 13. OPERATING DVD 11. OPTIONAL SETTING 15 9 10 WATCHING TV 8 6. INITIAL SETTING 4. 14. SUBTITLE button (p37) Press to select subtitles on a disc (DVD). 15. ANGLE button (p37) • Press to change the camera angle to see the sequence being played back from different angle (DVD). • Press to rotate a picture (JPEG). 16.
INTRODUCTION 5 Control Panel side of this unit 1 2 3 4 5 6 7 8 9 10 11 5 Rear Panel rear of this unit 12 13 14 15 16 17 PC-IN COMPONENT 1 VIDEO 1 COMPONENT 2 18 PC-IN 19 AUDIO COMPONENT 1 Y R R AUDIO AUDIO Pb 20 L L Pr VIDEO 1 COMPONENT 2 R AUDIO Pb L AUDIO L VIDEO S VIDEO VIDEO Y VIDEO 2 R 21 22 S-VIDEO 23 Pr 8 rear of this unit EN side of this unit 1. POWER button (p13) Press to turn the unit on and off. 2.
INTRODUCTION CONNECTION Cables not included. Please purchase the necessary cables at your local store. 5 Basic Connection CONNECTION This section describes how to connect the unit to an antenna, cable receiver or satellite box. Note: • Be sure your antenna or other device is connected properly before plugging in the AC power cord. [Antenna Cable Connection] Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit. INITIAL SETTING e.g.
CONNECTION Cables not included. Please purchase the necessary cables at your local store. 5 External Device Connection [HDMI Connection] HDMI (High Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. It ensures that the content sent from the source to this unit is of the highest possible resolution. rear of this unit To HDMI 1-IN or HDMI 2-IN jack e.g.
INTRODUCTION Cables not included. Please purchase the necessary cables at your local store. Note: CONNECTION • This unit accepts 480i / 480p / 720p / 1080i video signals. [S-video Cable Connection] S-video connection offers good picture quality for video devices connected to the unit. Use an S-video cable to connect the unit to external video devices equipped with S-video output jack.
CONNECTION Cables not included. Please purchase the necessary cables at your local store. [Audio Output Connection] [Digital] If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound. [Analog] If you connect this unit to an external analog audio device, you can enjoy stereo (2 channel) audio. AUDIO IN L R e.g.) Stereo system RCA audio cable e.g.
These operations are accessible by remote control. Some may also be accessible by controls on the main unit. INTRODUCTION INTIAL SETTING TV Functions 5 Initial Setup Before you begin: making all the necessary connections, press 1 After [POWER] to turn on the unit. • If you connect the cable system directly, contact the CATV installer. • If you press [POWER] or [SETUP] during auto channel scan, this setting will be canceled.
INITIAL SETTING And select the sound input for the HDMI jack if your TV is connected to a HDMI device. (Refer to “HDMI Audio” on page 27.) • LANGUAGE You can change the language (English, Spanish, French) displayed on the main menu. (Refer to “Language Selection” on page 14.) • DVD You can customize some functions for the disc playback. Make sure the player is in stop mode. (Refer to “SETTING DVD“ section on page 39.) • When aerial antenna is connected, select “Air”.
5 Channel Selection 5 Volume Adjustment Select channels by pressing [CHANNEL / ] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. / ] To Use [the Number buttons] Use [VOLUME / ] to adjust the audio volume. Volume 20 - When selecting analog channel 12 DTV Mute - When selecting digital channel 12-1 Be sure to press [–] before entering the minor channel number.
WATCHING TV To Cancel the Sleep Timer Press [SLEEP] repeatedly until “Sleep Off” is displayed on the TV screen. 5 Switching Audio Mode This section describes how to switch the audio language. TV Note: • The sleep timer setting display will automatically disappear in 4 seconds. • When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled. [AUDIO] to display the currently selected 1 Press audio mode.
Note: You can display the currently selected channel or other information such as the audio mode on the TV screen. TV Press [INFO]. 6 Video1 SAP / STEREO SD SD • When the program guide consists of more than 4 lines, use [Cursor K/ L] to scroll. • “No description provided” is displayed when the program guide is not provided. • While the program guide is displayed, the closed caption function is interrupted. • In external input mode, the following screen is displayed; e.g.
WATCHING TV 5 TV Screen Display Mode For 16:9 video signal 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And 3 types of display modes can be selected for PC input signal. Press [SCREEN MODE] repeatedly to switch the TV aspect ratio. Full (normal) Zoom Expand Cinema For 4:3 video signal Sidebar (normal) Full Wide Cinema [Sidebar] Display a 4:3 picture at its original size. Sidebars appear on both edges of the screen.
5 Manual Register The channel list function lets you remove undesired channels from the channel registration list. The manual register function lets you add the channels that were not added by the auto channel scan due to the reception condition at the initial setting. 1 Press [SETUP] to display the main menu. 1 Press [SETUP] to display the main menu. [Cursor K / L] to select “CHANNEL”, then press 2 Use [ENTER]. [Cursor K / L] to select “CHANNEL”, then press 2 Use [ENTER].
OPTIONAL SETTING 5 Antenna Confirmation 5 Picture Adjustment This function lets you check the signal strength of each channel. You can adjust brightness, contrast, color, tint and sharpness. 1 Press [SETUP] to display the main menu. 1 Press [SETUP] to display the main menu. [Cursor K / L] to select “CHANNEL”, then press 2 Use [ENTER]. [Cursor K / L] to select “PICTURE”, then press 2 Use [ENTER]. [Cursor K / L] to select the item you want to adjust, 3 Use then press [ENTER].
[Cursor K / L] to select the sound type you want to 3 Use adjust, then press [ENTER]. INTRODUCTION Reset Settings Use [Cursor K / L] to select “Reset”, then press [ENTER] to restore the “Picture Mode” setting to default. Reset Settings Sound Cancel Treble Reset 0 Bass CONNECTION This function resets the "Dynamic" setting for Picture Mode to factory default. 0 Surround Off Reset Settings Picture 4 Adjust the sound setting. INITIAL SETTING Color Temp.
OPTIONAL SETTING 5 Closed Caption You can view closed captioning (cc) for TV programs, movies and news. Closed caption refer to text of dialogue or descriptions displayed on-screen for the hearing impaired. 1 Press [SETUP] to display the main menu. [Cursor K / L] to select “DETAIL”, then press 2 Use [ENTER]. CC2, CC4, Text2 and Text4; are rarely available and broadcasters use them only in special conditions, such as when “CC1” and “CC3” or “Text1” and “Text3” are not available.
INTRODUCTION 5 DTV Closed Caption [Cursor K / L] to select “Closed Caption”, then 2 Use press [ENTER]. DTV In addition to the basic closed caption described on page 22, DTV has its own closed caption called DTV CC. Use this menu to change the settings for DTV CC. Closed Caption V–chip PC Settings Repeat steps 1 and 2 in “Closed Caption”on page 22. [Cursor K / L] to select “Closed Caption”, then 2 Use press [ENTER].
OPTIONAL SETTING [Font Size] Font size of the displayed caption can be switched as below. CC Style [Edge Type] Edge type of the displayed caption can be switched as below. CC Style Closed Caption Closed Caption User Setting User Setting Font Style Font Style Font Size Large Font Size Font Color Middle Font Color None Font Opacity Small Font Opacity Raised Back Color Back Color Depressed Back Opacity Back Opacity Uniform Edge Color Edge Color L.Shadow Edge Type Edge Type R.
INTRODUCTION Note: Note: • Changing the category to “Block” or “View” automatically changes all its sub ratings to the same (“Block” or “View”). B. TV Rating CONNECTION [Cursor K / L] to select “TV Rating”, then press 4 Use [ENTER]. V-chip MPAA Rating TV Rating Downloadable Rating INITIAL SETTING • When you select a rating and set it to “Block”, the higher ratings will be blocked automatically. The lower ratings will be available for viewing.
OPTIONAL SETTING Sub Rating FV Category Rating Fantasy Violence TV-Y7 5 PC Settings This function lets you adjust the PC screen position, clock and phase during PC input. V Violence S Sexual Situation L Coarse Language TV-PG TV-14 TV-MA D Suggestive Dialogue TV-PG, TV-14 1 Repeat steps 1 and 2 in “Closed Caption”on page 22. [Cursor K / L] to select “PC Settings”, then press 2 Use [ENTER].
INTRODUCTION 5 5 Blue LED Press [SETUP] to exit. You can set the blue LED on the front panel to light up when the unit is turned on or when a disc is inserted. 1 Repeat steps 1 and 2 in “Closed Caption”on page 22. • Adjust the “Phase” setting after the “Clock” setting has been properly adjusted. • You may not obtain an appropriate screen with auto adjustment for some signals. In this case, adjust the settings manually. CONNECTION Note: [Cursor K / L] to select “Blue LED”, then press 2 Use [ENTER].
OPERATING DVD DVD Functions 5 Playable Media Type of media Mark (logo) DVD-video *1, 2, 4, 6, 10, 11 Region code 1 Recorded signals Media size Disc types or ALL DVD-RW DVD-R * 1, 3, 4, 5, 6, 7, 8, 9, 10 - DVD+RW DVD+R * 1, 4, 5, 6, 9, 10 - audio CD * 4, 6, 10 - digital audio video CD * 4, 6, 10 - digital video (MPEG1) CD-RW CD-R * 4, 5, 6, 9,10 - digital audio or MP3 or JPEG or digital video (MPEG1) Kodak Picture CD * 4, 5, 6, 9, 10 - digital video (MPEG2) e.g.
INTRODUCTION These operations are accessible by remote control. Some may also be accessible by controls on the main unit. 5 Disc Menu 5 Playback DVD CD DVD VCD 1 Press [POWER] to turn on the unit. VCD Some discs contain disc menus which describe the contents of the disc or allow you to customize disc playback, or title menu which lists the titles available on the DVD. CONNECTION JPEG ( MP3 on page 30) Before you begin: Turn on the amplifier and any other equipment which is connected to this unit.
OPERATING DVD 5 Fast Forward / Fast Reverse DVD CD VCD a desired zoom factor is set, 3 Once use [Cursor K / L / s / B] to slide the zoomed picture MP3 Press [FWD D] or [REV E] repeatedly during playback to select the required forward or reverse speed. To continue playback, press [PLAY B]. across the TV screen. E1 Note: • Set “STILL MODE” to “FIELD” in the “OTHERS” menu if pictures in the fast playback mode are blurred. (Refer to page 42.) • Fast forward / fast reverse speed is varies with disc.
Picture 4 Picture 5 Picture 6 1/32 • If all menu items cannot be displayed in the screen scope, “G” appears at the right bottom of the screen, indicating that the user can view remaining items on the next page. “H” appears, it indicates that the user can view other items on the previous page. The file number of the currently highlighted item and the total files are shown at the center bottom of the screen. • If “G” is shown at the right bottom, press [SKIP G] to view the next page.
OPERATING DVD 5 Dual Playback MP3 Note: JPEG This function lets you play back MP3 and JPEG files simultaneously. Available only when “DUAL PLAYBACK” is “ON”. See page 42 on how to set “DUAL PLAYBACK” “ON” or “OFF”. 1 Press [PLAY B], then press [DISC MENU]. • To cancel folder playback, press [MODE] again at step 1. • If you press [FWD D] or [REV E] during folder playback, a JPEG file will be paused. • Zooming or rotating a JPEG file during folder playback may cause an intermittent sound.
3 Press [BACK/RETURN] to exit. playback, press [SKIP H, G] repeatedly until 1 During a desired chapter or title will be selected. Note: DVD will start automatically from the chapter or 2 Playback title you selected. Note: • [SKIP H / G] are not available when playback is stopped. • Chapter or title search can only be performed during playback or when the unit has kept the resume information. It cannot be performed in the stop mode. Track Search [SEARCH MODE] repeatedly until “ ” appears.
OPERATING DVD Direct Search Using [SKIP H , G] playback, press [SKIP H, G] repeatedly until 1 During a desired track/file will be selected. current track/file (TR) or DVD VCD CD MP3 JPEG w/o PBC Press [the Number buttons] to select your desired chapter, title, track/file. TR 1 TR 2 TR 3 TR 4 [SKIP H] [SKIP G] 2 Playback will start automatically from the track/file you selected. Note: • [SKIP H / G] are not available when playback is stopped.
DVD CD INTRODUCTION 5 Repeat A-B Playback 5 Programmed Playback VCD CD You can repeat playback between A and B on a disc. MP3 JPEG You may determine the order in which tracks will play back. CONNECTION stop mode, press [MODE] repeatedly until 1 During playback, press [A-B] at your desired starting point (A). 1 In“PROGRAM” menu appears. A- e.g.) audio CD PROGRAM CD-DA 2 Press [A-B] at your desired ending point (B).
OPERATING DVD 5 On-screen Display VCD CD w/o PBC You can check the information about the current disc by pressing [INFO] on the remote control.
• Each time you press [AUDIO], the audio language changes as example below. 1.ENG/6 OFF (no subtitles) ENG (English subtitles) FRE (French subtitles) To cancel the subtitle 1.ENG/6 (Spanish audio) FRE (French audio) Note: • Some discs will only allow you to change the audio setting from the disc menu. Refer to the manual accompanying the discs for details. • If your language is not shown after pressing [AUDIO] several times, the disc may not have that language.
OPERATING DVD Marker Setup Stereo Sound Mode CD VCD DVD CD VCD w/o PBC This feature allows you to assign a specific point on a disc to be called back later. This unit allows you to select a sound mode during CD playback. To set a marker During playback, press [AUDIO] repeatedly until the desired sound mode appears. playback, press [SEARCH MODE] repeatedly 1 During until “ ” appears. STEREO e.g.) DVD • Each time you press [AUDIO], the sound mode changes as example below.
INTRODUCTION SETTING DVD Settings are only effective when the unit is in DVD mode and any discs should not be played back. 5 DVD Language Setting You can change the desired language when playing back the disc. [SUBTITLE] *1, *2 (Default: OFF) Select the desired subtitle language. LANGUAGE ENTER Setup SUBTITLE OFF ENGLISH FRENCH SPANISH GERMAN ITALIAN SWEDISH INITIAL SETTING 2 Use [Cursor K/ L] to select “DVD”, then press [ENTER]. CONNECTION 1 Press [SETUP] to display the main menu.
SETTING DVD 5 DVD Audio Setting Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD. 1 Press [SETUP] to display the main menu. [DOWN SAMPLING] (Default: ON) Set “DOWN SAMPLING”. This function is available only on digital outputting of a disc recorded in 96kHz. AUDIO DRC DOWN SAMPLING DOLBY DIGITAL ON ON BITSTREAM ENTER 2 Use [Cursor K/ L] to select “DVD”, then press [ENTER]. Setup Press “ENTER” key to move to DVD Setup. ON : When outputting in 48kHz.
Parental setting prevents your children from viewing inappropriate materials. (password protected.) Playback will stop if the ratings exceed the levels you set. [Cursor K / L] to select the desired item, then press 6 Use [ENTER]. PARENTAL ENTER Setup Press “ENTER” key to move to DVD Setup. ”, then press [ENTER]. PARENTAL PARENTAL LEVEL ALL : All parental locks are cancelled. 8 [ADULT] : All ratings (adult/general/children) can be played back.
SETTING DVD 5 Others FIELD : You can change the other functions. FRAME : 1 Press [SETUP] to display the main menu. the picture in the still mode will be stabilized. the picture in the still mode will be highly defined. OTHERS ENTER 2 Use [Cursor K/ L] to select “DVD”, then press [ENTER]. Setup Press “ENTER” key to move to DVD Setup.
You can reset all the settings except for the parental setting and on-screen menu language. 1 Press [SETUP] to display the main menu. Press “ENTER” key to move to DVD Setup. Language Code A-B Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian Burmese Byelorussian 4748 4747 4752 6563 4759 4764 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 5971 4851 C-E ”, then press [ENTER].
TROUBLESHOOTING 5 Troubleshooting Guide If the unit does not perform properly when operated as instructed in this user’s guide, check the following chart once before calling for service.
Remedy CONNECTION • Many digital channels have alternate channel numbers. TV changes the numbers automatically to the ones signifying the broadcasting stations. These are the numbers used for analog broadcasts. • Check the antenna or cable connection to the main unit. • Check the batteries of the remote control. • Check if there is an obstacle between the sensor and the remote control. • Test the signal output. If OK, then possible remote sensor trouble. (Refer to “IR Signal Check” on page 46.
INFORMATION 5 Maintenance Servicing Cabinet Cleaning • Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry. • Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces. Panel Cleaning Wipe the panel of the unit with a soft cloth. Before cleaning the panel, disconnect the power cord.
INTRODUCTION 5 Cable Channel Designations If you subscribe to cable TV, the channels are displayed as 1-135. Cable companies often designate channels with letters or letter-number combinations. Please check with your local cable company. The following is a chart of common cable channel designations.
MEMO 48 EN
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING OPERATING DVD SETTING DVD TROUBLESHOOTING INFORMATION EN 49
JVC Loves the Earth JVC COMPANY OF AMERICA Division of JVC Americas Corp.