Battery Charger Instructions Manual

6 EN

MasterPage: Body_Left

1 Connect the power cord to the battery charger.

2 Plug the power cord into an AC outlet.

3 Remove the battery pack’s protective cap. Attach the

battery pack with its protrusion pointing toward the lamp

side of the battery pack mount on the battery charger.

The CHARGE lamp lights up to indicate charging has

started.

4 When the CHARGE lamp lights off, charging is

finished.

5 Slide the battery in the opposite direction of the arrow

and lift off. Remember to unplug the power cord from the

AC outlet.

NOTE:

Perform charging where the temperature is between 10°C

and 35°C. 20°C to 25°C is the ideal temperature range for

charging. If the environment is too cold, charging may be

incomplete.

* When charged at temperatures between 20°C and 25°C.

● When charging battery packs after a long storage period,

charging time will be longer than the time indicated above.

Charging the Battery Pack

CHARGE lamp

To AC outlet

Battery pack

BN-VM200U

Power cord

Protrusion

Battery charger

Battery pack Charging time

BN-VM200U

Approx. 2 hrs.* when one battery

pack is attached.

Approx. 4 hrs.* when two battery

packs are attached.

AA-V200E.book Page 6 Friday, February 18, 2005 5:51 PM