AC POWER ADAPTER/CHARGER ENGLISH ADAPTATEUR SECTEUR/CHARGEUR DE BATTERIE ADAPTADOR/CARGADOR DE CA INSTRUCTIONS MANUEL D’INSTRUCTIONS MANUAL DE INSTRUCCIONES For Customer Use: Enter below the Serial No. which is located on the bottom of the unit. Retain this information for future reference. Model No. AA-V90U Serial No.
Thank you for purchasing the JVC AC Power Adapter/ Charger. This unit provides DC power for the JVC Digital Video Camera from a household AC outlet. It can be used to recharge the JVC battery pack for exclusive use with the JVC Digital Video Camera, and is capable of charging two battery packs consecutively. To avoid problems and obtain the best results, please read this instruction booklet carefully before use.
USING HOUSEHOLD AC PLUG ADAPTER In case of connecting attached Power Cord Plug to AC wall outlet other than American National Standard C73 series type, use an AC plug adapter, so called “Siemens Plug”, as shown below. Plug adapter (optional) A WORD ON THE EXCLUSIVE BATTERY PACKS The battery packs are lithium-ion. Give attention to the following to make the most of their characteristics.
CHARGING THE BATTERY PACK You can charge one battery pack at a time, or two consecutively.
POWER TO CHARGER 1 SUPPLY Plug the AC Adapter/Charger's power cord in to an AC outlet. The power indicator comes on. BATTERY/BATTERIES 2 ATTACH Remove the battery pack’s protective cap and attach while making sure the marks are facing down and aligned with the corresponding marks on the AC Power Adapter/Charger. •The Charge Indicator (1 or 2) begins blinking to indicate charging has started. STATUS 3 CONFIRM When the charger indicator stops blinking but stays lit, charging is finished.
SUPPLYING POWER To AC outlet You can connect the camcorder or its Docking Station directly to an AC outlet using the AA-V90U AC Power Adapter/Charger. Power cord AC Power Adapter/Charger JVC Digital camcorder cord in to an AC outlet. POWER TO CAMCORDER 2 SUPPLY Connect the AC Adapter to the camcorder.
DURING USE . . . ● The AC Power Adapter/Charger AA-V90U is specifically designed to charge BN-V907U Battery Packs. ● When charging a brand new Battery Pack, or one that’s been in storage for an extended period, the Charging Indicator may not come on. In this case, remove the Battery Pack, then reattach and try charging again. ● If you connect the DC Cord to the DC Connector while a Battery Pack is being charged, power will be supplied to the camcorder and charging will end incomplete.
Merci d’avoir acheté cet adaptateur secteur/chargeur JVC. Il est destiné à fournir le courant continu nécessaire au camescope numérique JVC à partir d’une prise secteur. Il sert aussi à charger la batterie JVC prévue pour le camescope numérique JVC. Il peut charger deux batteries l’une après l’autre. Pour éviter tout problème et utiliser de manière optimale l’adaptateur/chargeur, veuillez lire les instructions de ce manuel avant utilisation.
UTILISATION DE L’ADAPTATEUR DE PRISE SECTEUR: Lors du branchement du cordon d’alimentation de l’appareil à une prise secteur différente du standard national américain C73, utiliser un adaptateur de prise CA nommé “Siemens Plug”, comme indiqué ci-dessous. Adaptateur de fiche A PROPOS DES PILES RECHARGEABLES Les piles rechargeables sont au lithium-ion. Tenez compte des informations suivantes pour profiter au maximum de toutes leurs caractéristiques.
RECHARGE DE LA BATTERIE Vous pouvez recharger une batterie à la fois ou deux, l’une après l’autre.
LE CHARGEUR AU SECTEUR 1 RACCORDEZ Branchez le cordon d’alimentation de l’adaptateur secteur/chargeur sur une prise de courant. Le témoin d’alimentation s’allume. EN PLACE UNE OU DEUX BATTERIES 2 METTEZ Retirer le capuchon de protection de la batterie et la mettre en place tout en s’assurant que les repères sont dirigés vers le bas et alignés avec les repères correspondants sur l’adaptateur secteur/chargeur. •Le témoin du chargeur (1 ou 2) se met à clignoter pour indiquer que la recharge commence.
FOURNITURE DE L'ALIMENTATION Vers une prise secteur Vous pouvez raccorder le camescope ou sa base de montage directement à une prise secteur en utilisant l'adaptateur secteur/ chargeur AA-V90U. Cordon d’alimentation Adaptateur secteur/chargeur Camescope numérique JVC L'ALIMENTATION À L'ADAPTATEUR 1 FOURNIR Brancher le cordon d'alimentation de l'adaptateur secteur/chargeur sur une prise de courant. L'ALIMENTATION AU CAMESCOPE 2 FOURNIR Raccorder l'adaptateur secteur au camescope.
PENDANT L’UTILISATION . . . ● L’adaptateur secteur/chargeur AA-V90U est spécialement conçu pour la recharge des piles BN-V907U. ● Quand vous rechargez une pile neuve, ou une pile qui n’a pas été utilisée pendant longtemps, le témoin de charge peut ne pas s’allumer. Dans ce cas, enlevez la pile puis remettez-la en place. ● Si vous raccordez le cordon CC au connecteur CC quand une pile est en cours de recharge, l’alimentation sera fournie au camescope et la recharge sera partielle.
Le agradecemos la adquisición de el adaptador/ cargador de CA de JVC. Esta unidad suministra CC para la videocámara digital de JVC, proveniente de un tomacorriente de CA. Puede ser utilizada para recargar la batería JVC para uso exclusivo con la videocámara digital de JVC, y es capaz de cargar dos baterías al mismo tiempo. Para evitar problemas y obtener los mejores resultados, lea este librillo de instrucciones antes de utilizar la unidad.
UTILIZACION DEL ENCHUFE ADAPTADOR DE C.A. RESIDENCIAL: Si conecta el cordón eléctrico en un enchufe de C.A. que pertenezca al Estándar Nacional Americano del tipo serie C73, utilice un adaptador de C.A. llamado “Siemens Plug”, como el mostrado. Enchufe adaptador ACERCA DE LAS PILAS EXCLUSIVAS Las pilas son de iones de litio. Preste atención a lo siguiente para obtener las mejores prestaciones.
CARGA DE LA BATERIA Usted puede cargar una sola batería, o dos simultáneamente.
DE ALIMENTACION AL 1 SUMINISTRO CARGADOR Enchufe el cable de alimentación del adaptador de CA/cargador en la toma de corriente de CA. Se encenderá la lámpara de alimentación. DE LA BATERIA/BATERIAS 2 COLOCACION Extraiga la tapa protectora de la batería y colóquela asegurándose que las marcas y apunten hacia abajo y queden alineadas con las marcas correspondientes en el adaptador/ cargador de alimentación de CA. •El indicador de cargador (1 o 2) comienza a parpadear indicando que se ha iniciado la carga.
SUMINISTRO DE ALIMENTACION A la toma de corriente alterna Usted podrá conectar la videocámara o su estación de anclaje directamente a un tomacorriente de CA utilizando el adaptador/ cargador de CA AA-V90U. Cable de alimentación Adaptador/ cargador de CA Videocámara digital JVC DE ALIMENTACION AL 1 SUMINISTRO ADAPTADOR Enchufe el cable del adaptador/cargador de CA a un tomacorriente de CA. DE ALIMENTACION A LA 2 SUMINISTRO VIDEOCAMARA Conecte el adaptador de CA a la videocámara.
DURANTE EL USO . . . ● El adaptador/cargador de CA AA-V90U ha sido específicamente diseñado para cargar pilas BNV907U. ● Cuando cargue una pila nueva, o una que ha estado almacenada durante un largo período, la indicación de carga puede no encenderse. En este caso extraiga la pila y recolóquela para intentar otra vez. ● Si usted conecta el cordón de CC al conector de CC mientras la pila está siendo cargada, se conectará la alimentación a la videocámara y la carga terminará antes de quedar completa.
AA-V90U VICTOR COMPANY OF JAPAN, LIMITED COPYRIGHT© 1997 VICTOR COMPANY OF JAPAN, LTD.