INSTRUCTIONS

Troubleshooting
Trouble Action
The charging lamp does not
light up.
The charging lamp may sometimes not light up for batteries that are
recently purchased or have been kept for a long time. In these cases,
remove the battery and charge it again.
The charging lamp blinks
during charging.
Are you charging the battery under low (0 °C and below) or high (40 °C
and above) temperature?
Charge the battery in an environment between 0 °C and 40 °C. If the
surrounding
temperature is too low or
high, charging may stop in order to
protect the battery.
The battery charger is getting
hot.
This is not a malfunction.
Battery is fully charged but the
shooting time is short.
Battery life is expiring. Replace the battery.
Specifications
General
Item Description
AC adapter input
voltage
AC 100 V to 240 V, 50 Hz/60 Hz
Input DC 12 V, 3.0 A
Output DC 8.4 V, 3.4 A / 1.7 A
Allowable operating
temperature
0 °C to 40 °C (32 °F to 104 °F)
Mass
Approx. 150 g
Supported
battery
BN-VC296G, BN-VC2128G
* Charge only the battery specified in this manual.
Accessories
Accessories
Warranty Card (for USA) 1
INSTRUCTIONS 1
AC Adapter 1
Power Cord (U model: 1, E model: 2)
* The warranty card is included in the instruction
manual.
Dimensional Outline Drawing (Unit: mm)
.
131 mm
103 mm
40 mm
* The specifications and appearance of this product are subject to changes for further improvement
without prior notice.
8 EN