COLOR TELEVISION Contents AV-14FN15 Knowing your TV’s features .......................... 2 Remote control buttons and basic functions . 3 TV buttons and functions .............................. 5 Setting up your TV ........................................ 6 Basic setting for picture ................................. 8 Advanced setting for picture ......................... 9 Original features for picture ........................... 9 Advanced setting for sound ..........................
Thank you for buying this JVC color television. To make sure you understand how to use your new TV, please read this manual throughly before you begin. Safety Instructions WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the power cord and AC plug.
Remote control buttons and basic functions 1 6 0 9 8 2 3 7 5 4 RM-C1265 No. Press To 1 2 3 4 5 6 7 8 POWER MENU/OK 5/∞/2/3 CHANNEL M VOLUME M TV/VIDEO MUTING DISPLAY/BACK Turn on or off the TV from standby mode. Display menu and confirm selected function. Select and adjust menu function. Select the desired channel number. Adjust the volume level. Select TV or VIDEO terminal input. Turn off the volume. Press this button again to resume the volume.
Remote control buttons and basic functions How to operate menus and menu locations TO Display the MENU. Operation Press the MENU/OK button 2. Display the top menu. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Display the 2nd menu. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Display the 3rd menu. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Return to the previous Press the DISPLAY/BACK button* 8. menu.
TV buttons and functions Front of the TV 9 8 7 6 5 4 32 1 AV-14FN15 VIDEO AUDIO IN (VIDEO-2) MENU OK Rear of the TV AV-14FN15 VIDEO-1 INPUT OUTPUT VIDEO AUDIO =- No. Button/terminal 1 I (main power) 2 Power lamp 3 4 5 6 7 8 9 0 = TIMER lamp Remote control sensor VOLUME M CHANNELM MENU IN (VIDEO-2) OUTPUT VIDEO-1 INPUT 0 Description Press to turn on or turn off the TV’s main power. Indicate the TV is being turned on or off. No color : TV’s main power is being turned off.
Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the antenna To install rod antenna Install into the top-rear holder. Once installed, it cannot be removed. Indoor antenna Rod antenna Antenna holder VHF/UHF outdoor antenna VIDEO-1 INPUT OUTPUT VIDEO VIDEO-1 INPUT OUTPUT VIDEO AUDIO AUDIO If you connect a VCR, connect the antenna output jack of your VCR and the antenna jack on the TV with the antenna cable.
Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then the TV will operate by following steps as below: LANGUAGE ENGLISH ESPAOL PORTUGUæS 7 • Press 5/∞ button to select your desired language. ≠ • Press the red button to cancel the SETUP TOUR RESTART function.
Basic setting for picture COLOR SYSTEM You can select the appropriate color system when the picture is not clear or no color appears. Press the COLOR SYSTEM button to select a setting. AUTO NTSC PAL-N Adjusting the picture - USER For the color system in each country or region, see the table below: South America Country or Region Argentina, Paraguay, Uruguay Brazil Chile, Peru, Bolivia, Colombia, Venezuela, Ecuador, etc.
Advance setting for picture BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna. Select the BLUE BACK in the INSTALL menu, then choose ON or OFF. INSTALL BLUE BACK ❇ MENU If you wish to continue viewing the poor picture, cancel the BLUE BACK function. Original features for picture CLOSED CAPTION If they are included in a program, you can view closed captions or text information.
Favorite channel and video setting To register the favorite channel You can register and recall 4 favorite channels by using the color buttons (red, green, yellow, blue). 1 In TV mode, select a TV channel (CH02CH69, CC01-CC125) you desired to register. 2 Press and hold a color button for 3 seconds or more. “FAVORITE CHANNEL 7 PROGRAMMED!” appears on the screen and current channel is registered. 3 To register other favorite channels, repeat Step 1 to 2. To recall the favorite channel, press the color button.
Customized setting VNR You can reduce the picture noise. Select the VNR in the PICTURE FEATURES menu under PICTURE menu, then choose a setting of VNR function. ❇ MENU VNR OFF AUTO MIN MAX PICTURE PICTURE FEATURES VNR is turned off. Effect of VNR is automatically controlled. Effect of VNR becomes minimum level. Effect of VNR becomes maximum level. If you select MAX, the picture becomes softer even if the original picture is sharp. LANGUAGE You can choose your desired on screen display language.
TV channel presetting To register the TV channels automatically You can register the TV channels into the TV’s channel list automatically. 1 Display the INSTALL menu. INSTALL ❇ MENU 2 Choose AUTO PROGRAM, then press the MENU/OK button. 3 Press the 5/∞ button to select AIR or CABLE, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered automatically. 4 “SETUP TOUR RESTART?” appears. To start the SETUP TOUR To skip the SETUP TOUR Press the MENU/OK button.
Additional preparation Before connecting • Read the manuals provided with the devices for the proper connection. • Turn off all the devices including the TV. • Note that connecting cables are not supplied.
Specifications TV RF systems M, N Color systems NTSC, PAL-M, PAL-N Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. Power requirements AC 110 to 240 V, 50/60 Hz External input / output VIDEO-1: VIDEO-2: OUTPUT: Headphone jack: VIDEO input, AUDIO input VIDEO input, AUDIO input, VIDEO output, AUDIO output stereo mini jack (3.
MEMO 15 GGT0081-001A-D-P02-15 15 12/1/04, 11:29
© 2004 Victor Company of Japan, Limited GGT0081-001A-D-Cover 20 1204-NIC-JMT 12/1/04, 11:28
